Materials Science and Engineering: A

Strain rate sensitivity of a closed-cell aluminum foam
pp. 1-7(7)
Authors: Paul A.; Ramamurty U.

Effects of melt flow and temperature on the macro and microstructure of scroll compressor in direct squeeze casting
pp. 8-16(9)
Authors: Lee J.H.; Won C.W.; Cho S.S.; Chun B.S.; Kim S.W.

The effect of boron on the microstructure and mechanical behavior of an Ni-19Si-3Nb based alloy
pp. 17-22(6)
Authors: Jang J.S.C.; Wong S.K.; Lee P.Y.

Quenching and tempering-induced molybdenum segregation to grain boundaries in a 2.25Cr-1Mo steel
pp. 23-27(5)
Authors: Song S.-H.; Faulkner R.G.; Flewitt P.E.J.

Chemical reactivity of silicon nitride with steel and oxidised steel between 500 and 1200^oC
pp. 28-36(9)
Authors: Kalin M.; Vizintin J.; Vleugels J.; Van Der Biest O.

Cyclic stress-strain response of the ODS nickel-base, superalloy PM 1000 under variable amplitude loading at high temperatures
pp. 37-44(8)
Authors: Heilmaier M.; Maier H.J.; Jung A.; Nganbe M.; Muller F.E.H.; Christ H.-J.

Probing the crystalline environment of -alumina via luminescence of metal ion impurities: an optical method of ceramic flaw detection
pp. 45-55(11)
Authors: Jankowiak R.; Roberts K.; Tomasik P.; Sikora M.; Small G.J.; Schilling C.H.

A study of grain boundary embrittlement in an Fe-8%Mn alloy
pp. 56-67(12)
Authors: Nasim M.; Edwards B.C.; Wilson E.A.

Microstructural development during final-stage sintering of nanostructured zirconia based ceramics
pp. 68-74(7)
Authors: Betz U.; Sturm A.; Loffler J.F.; Wagner W.; Wiedenmann A.; Hahn H.

Temper embrittlement of a CrMo low-alloy steel evaluated by means of small punch testing
pp. 75-81(7)
Authors: Song S.-H.; Faulkner R.G.; Flewitt P.E.J.; Smith R.F.; Marmy P.

Development of a multi-pass facility for equal-channel angular pressing to high total strains
pp. 82-87(6)
Authors: Nakashima K.; Horita Z.; Nemoto M.; Langdon T.G.

Stain anisotropy in AA8090 Al-Li alloy during high temperature deformation
pp. 88-95(8)
Authors: Kashyap B.P.; Chaturvedi M.C.

Microstructure of a boron containing high purity nickel-based alloy 690
pp. 96-103(8)
Authors: Thuvander M.; Stiller K.

Microstructural development of Al-15wt.%Mg₂Si in situ composite with mischmetal addition
pp. 104-112(9)
Authors: Zhang J.; Fan Z.; Wang Y.Q.; Zhou B.L.

Deformation behavior of model MMC scarf joints
pp. 113-125(13)
Authors: Brink D.D.; Mailand J.C.; Levi C.G.; Leckie F.A.

Study on fatigue crack propagation and extrinsic toughening of an Al-Li alloy
pp. 126-131(6)
Authors: Cui J.; Fu Y.; Li N.; Sun J.; He J.; Dai Y.

Precipitation evolution during the annealing of an interstitial-free steel
pp. 132-142(11)
Authors: Carabajar S.; Merlin J.; Massardier V.; Chabanet S.

Effect of carbon content on elevated temperature stability and tensile properties of Fe-8.5 Al Alloys
pp. 143-147(5)
Authors: Baligidad R.G.; Radhakrishna A.

On the disclination-structural unit model of grain boundaries
pp. 148-155(8)
Authors: Nazarov A.A.; Shenderova O.A.; Brenner D.W.

Effect of cross-link density on strain gradient plasticity in epoxy
pp. 156-161(6)
Authors: Lam D.C.C.; Chong A.C.M.

Disappearance of the true threshold creep behaviour of an ODS Al-30SiC_p composite at high temperatures
pp. 162-168(7)
Authors: Cadek J.; Kucharova K.; Zhu S.J.

The influence of addition of TiH₂ in elemental powder sintering porous Ni-Ti alloys
pp. 169-175(7)
Authors: Li B.-Y.; Rong L.-J.; Li Y.-Y.

Monte Carlo simulation of microstructure evolution based on grain boundary character distribution
pp. 176-188(13)
Authors: Lee H.N.; Ryoo H.S.; Hwang S.K.

Microstructural stability of Cu-Nb microcomposite wires fabricated by the bundling and drawing process
pp. 189-197(9)
Authors: Ig Hong S.; Hill M.A.

Penetration of liquid gallium into the grain boundaries of aluminium: a synchrotron radiation microtomographic investigation
pp. 198-203(6)
Authors: Ludwig W.; Bellet D.

Transmisson electron microscopy of phase composition and lattice misfit in the Re-containing nickel-base superalloy CMSX-10
pp. 204-212(9)
Authors: Schulze C.; Feller-Kniepmeier M.

Studies of dielectric relaxation and a.c. conductivity in cellulose acetate hydrogen phthalate-poly(methyl methacrylate) blends
pp. 213-220(8)
Authors: Rao V.; Ashokan P.V.; Shridhar M.H.

Microstructure investigation of plasma sprayed HA/Ti6Al4V composites by TEM
pp. 221-228(8)
Authors: Khor K.A.; Dong Z.L.; Quek C.H.; Cheang P.

Interdiffusion in the face-centred cubic phase of the Ni-Re, Ni-Ta and Ni-W systems between 900 and 1300^oC
pp. 229-233(5)
Authors: Karunaratne M.S.A.; Carter P.; Reed R.C.

Martensitic transformation of the Ti₅₀Ni₄₈Fe₂ alloy deformed at different temperatures
pp. 234-238(5)
Authors: Xu H.; Jiang C.; Gong S.; Feng G.

The influence of a third element on the interface reactions in metal-matrix composites (MMC): Al-graphite system
pp. 239-247(9)
Authors: Pelleg J.; Ashkenazi D.; Ganor M.

Superplastic behavior of a -forged Ti₃Al-Nb alloy
pp. 248-252(5)
Authors: Ding H.; Song D.; Zhang C.B.; Cui J.Z.

Fabrication of Ni-Al₂O₃-based reforming catalyst using flame-assisted vapour deposition
pp. 253-258(6)
Authors: Choy K.-L.; Seh H.-K.

Bonding of monazite to Al₂O₃ and TiO₂ ceramics
pp. 259-262(4)
Authors: Sudheendra L.; Renganathan M.K.; Raju A.R.

Experimental study of electroplastic effect on stainless steel wire 304L
pp. 263-267(5)
Authors: Tang G.; Zhang J.; Zheng M.; Zhang J.; Fang W.; Li Q.

Mean stress dependence of fatigue strength and subsurface crack initiation in Ti-15Mo-5Zr-3Al alloy
pp. 268-274(7)
Authors: Tokaji K.; Kariya H.

Effect of heating rate on the combustion synthesis of intermetallics
pp. 275-285(11)
Authors: Lee S.-H.; Lee J.-H.; Lee Y.-H.; Hyuk Shin D.; Kim Y.-S.

Effect of alloying elements on the amorphous formation and corrosion resistance of electroless Ni-P based alloys
pp. 286-291(6)
Authors: Bangwei Z.; Haowen X.

The high-cycle fatigue and fracture behavior of aluminum alloy 7055
pp. 292-304(13)
Authors: Srivatsan T.S.; Anand S.; Sriram S.; Vasudevan V.K.

Interface structure and mechanical properties of Al₂O₃-20vol%SiCw ceramic matrix composite
pp. 305-309(5)
Authors: Ye F.; Lei T.C.; Zhou Y.