Materials Science and Engineering: A

Multi-scale modeling of polycrystal plasticity: a workshop report
pp. 1-22(22)
Authors: Campbell G.H.; Foiles S.M.; Huang H.; Hughes D.A.; King W.E.; Lassila D.H.; Nikkel D.J.; de la Rubia T.D.; Shu J.Y.; Smyshlyaev V.P.

The relation between experiments and modeling of rapidly solidified 12Cr-Mo-V stainless steel
pp. 23-29(7)
Authors: Pryds N.H.; Hattel J.H.

The effect of transformation path on the final microstructure of high- and low-silicon 0.1 wt.% C steels
pp. 30-39(10)
Authors: Pereloma E.V.; Hodgson P.D.

Role of Pt content in the microstructural development and oxidation performance of Pt-aluminide coatings produced using a high-activity aluminizing process
pp. 40-47(8)
Authors: Krishna G.R.; Das D.K.; Singh V.; Joshi S.V.

Processing and characterization of aluminium-based MMCs produced by gas pressure infiltration
pp. 48-57(10)
Authors: Carreno-Morelli E.; Cutard T.; Schaller R.; Bonjour C.

Study of critical dependence of stable phases in Nitinol on heat treatment using electrical resistivity probe
pp. 58-63(6)
Authors: Uchil J.; Mohanchandra K.P.; Kumara K.G.; Mahesh K.K.

Determination of effective elastic properties of functionally graded materials using Voronoi cell finite element method
pp. 64-76(13)
Authors: Grujicic M.; Zhang Y.

The effect of phosphorus on carbide composition in a CrMoV low alloy steel under creep conditions
pp. 77-86(10)
Authors: Larouk Z.; Pilkington R.

Effects of 0.1 and 0.2 wt.% aluminium addition to zinc on the interdiffusion between zinc and iron at 400^oC
pp. 87-93(7)
Authors: Syahbuddin; Munroe P.R.; Laksmi C.S.; Gleeson B.

Finite element modeling of the influence of anisotropic material properties on dislocations in metals
pp. 94-99(6)
Authors: Feng H.; Bassim M.N.

Yield and compaction behavior of rapidly solidified Al-Si alloy powders
pp. 100-105(6)
Author: Kim H.S.

Rotation-coalescence of confined particles in Ni_1-xO/NiAl₂O₄ composites
pp. 106-112(7)
Authors: Wang S.R.; Shen P.

Static and cyclic fatigue in SiC whisker-reinforced silicon nitride composite
pp. 113-120(8)
Authors: Zhu S.; Mizuno M.; Kagawa Y.; Nagano Y.; Kaya H.

Equation of state of cementitious materials by ultrasonic methodology
pp. 121-128(8)
Authors: Mazzatesta A.D.; Rosen M.; Sidhu H.; Lindgren E.A.

Fabrication of transparent borate glasses containing -BaB₂O₄ by incorporation method
pp. 129-134(6)
Authors: Tsai Y.E.; Chang Y.H.

Discontinuous coarsening of discontinuous precipitates in a Co-6 at.% Mo alloy
pp. 135-141(7)
Authors: Lee S.-L.; Lee K.-C.; Chuang T.-H.

Characteristics of material surfaces modified using plasma-enhanced ion beams
pp. 142-149(8)
Authors: Peng X.D.; Kharlov A.; Bystritski V.; Garate E.; Lavernia E.J.

Characteristics of the A/D type twin boundary in 18R martensite in a Cu-Zn-Al alloy
pp. 150-156(7)
Authors: Zhang J.X.; Zheng Y.F.; Huang B.M.; Cai W.; Zhao L.C.

A fatigue life assessment of 0.8%C spray-formed steel
pp. 157-165(9)
Authors: Yan H.; Mao Z.; Xu G.; Shi L.; Tian M.; Zhang Y.; Vakulenko A.A.

A modified shear test for adhesion evaluation of thermal sprayed coating
pp. 166-172(7)
Authors: Era H.; Otsubo F.; Uchida T.; Fukuda S.; Kishitake K.

Finite element analysis of effect of precipitate aspect ratio on accommodation energies during solid state transformations
pp. 173-183(11)
Authors: Patnaik S.; Budhani R.C.; Wang Y.-L.; Suenaga M.; Sajikumar R.K.; Balasubramaniam R.; Kishore N.N.

Fatigue crack growth in a Ni-Sn multilayered composite
pp. 184-191(8)
Authors: Huang Y.K.; ten Haken B.; ten Kate H.H.J.; Wang W.; Singh R.N.

Alloying and aging effects on the fatigue crack growth of duplex stainless steels
pp. 192-199(8)
Authors: Kang T.H.; Li D.M.; Lee Y.D.; Lee C.S.

Influence of quench and heating rates on the ageing response of an Al-Zn-Mg-(Zr) alloy
pp. 200-207(8)
Authors: Deschamps A.; Brechet Y.

A calorimetric investigation on the kinetics of solute segregation to partial dislocations in Cu-3.34at%Sn
pp. 208-215(8)
Authors: Varschavsky A.; Donoso E.

High temperature deformation of Ti-(46-48)Al-2W intermetallic compounds
pp. 216-225(10)
Authors: Kim H.Y.; Sohn W.H.; Hong S.H.

On the chemical reactions to process particle reinforced Al-Cu alloy matrix composites
pp. 226-231(6)
Authors: Chen G.; Sun G.; Zhu Z.

Intermediate phases and phase relations in the composition range Al₃(Ti,V) to TiAl in the Al-Ti-V system
pp. 232-242(11)
Authors: Chang W.-S.; Muddle B.C.

Influence of damage and texture evolution on limit strain in biaxially stretched aluminum alloy sheets
pp. 243-250(8)
Authors: Ghosh A.; Adhikari S.K.; Hu J.; Jonas J.J.; Zhou Y.; Ishikawa T.

Fracture behavior of graphite coated with titanium compounds by chemical vapor deposition
pp. 251-254(4)
Authors: Erck R.A.; Maiya P.S.

Synthesis of a nanocrystalline W-25 wt.% Re alloy by mechanical alloying
pp. 255-261(7)
Authors: Ivanov E.Y.; Suryanarayana C.; Bryskin B.D.

Hardness and toughness of MoSi₂ and MoSi₂-SiC composite prepared by reactive sintering of powders
pp. 262-268(7)
Authors: Galkin A.Y.; Pust L.; Jirsa M.; Nalevka P.; Koblischka M.R.; Morris D.G.; Leboeuf M.; Morris M.A.

Precipitation at faceting grain boundaries of Cu-Ni-Sn alloys
pp. 269-275(7)
Authors: Romanovskii V.R.; Virtanen P.; Tiainen T.; Lepisto T.

A study on microstructural changes in Ti(CN)-NbC-Ni cermets
pp. 276-285(10)
Authors: Qi F.; Kang S.