Materials Science and Engineering: A

Predictions of the phase ratio at the lowest flow stress in superplastic titanium alloys
pp. 1-4(4)
Authors: Dutta A.; Kumar D.S.

Behaviour of hard metals and cermets under cyclic mechanical loads
pp. 1-8(8)
Authors: Schleinkofer U.; Sockel H.G.; Schlund P.; Heinrich W.; Gorting K.

Constitutive description of creep in polygonized substructures
pp. 5-9(5)
Author: Orlova A.

Choice of evolution equation for internal stress in creep
pp. 9-16(8)
Authors: Orlova A.; Milicka K.; Dobes F.

The behaviour of tantalum in the presence of CO and CO/CO₂ mixtures at elevated temperatures
pp. 11-14(4)
Authors: Chrysanthou A.; Grieveson P.

Measurement of austenite-to-ferrite transformation temperature after multi-pass deformation of steels
pp. 15-18(4)
Authors: Liu X.; Solberg J.K.; Gjengedal R.

Microstructure and high temperature mechanical properties of tin
pp. 17-23(7)
Authors: Adeva P.; Caruana G.; Ruano O.A.; Torralba M.

Interpretation of the creep behaviour of dispersion-strengthened Al-Fe-Ni alloys in terms of the detachment mechanism
pp. 19-21(3)
Author: Dobes F.

Effects of load and recovery time on the complex modulus of polyoximethylene
pp. 23-26(4)
Authors: Odeen S.; Blanc R.H.

A mechanistic approach to the life prediction of 316L stainless steel under combined creep/fatigue cycling
pp. 25-33(9)
Authors: Rodriguez-Ibabe J.M.; Martin-Meizoso A.; Martinez-Esnaola J.M.; Fuentes M.

Effects of chromium addition on the sustained-load cracking characteristics of gamma-base titanium aluminides
pp. 35-41(7)
Authors: Gnanamoorthy R.; Mutoh Y.; Mizuhara Y.

Effect of lamellar structure on fracture behavior of TiAl polysynthetically twinned crystals
pp. 43-51(9)
Authors: Nakano T.; Kawanaka T.; Yasuda H.Y.; Umakoshi Y.

Effect of APB type on tensile properties of Cr added Fe₃Al with DO₃ structure
pp. 53-61(9)
Authors: Yoshimi K.; Hanada S.; Terashima H.

High temperature plastic flow in TiC-20wt.%Mo₂C-20wt.%Ni cermet
pp. 63-68(6)
Authors: Okuyama K.; Sakuma T.

Superplastic gas-pressure deformation of iron carbide sheet
pp. 69-76(8)
Authors: Wittenauer J.; Kim W.J.; Sherby O.D.

Effect of Cu and Nb on crystallization and magnetic properties of amorphous Fe_77.5Si_15.5B₇ alloys
pp. 77-85(9)
Authors: Mattern N.; Danzig A.; Muller M.

Transmission electron microscopy study of high temperature bainitic transformation in 1 wt.% Mn ductile iron
pp. 87-98(12)
Authors: Ahmadabadi M.N.; Niyama E.; Echigoya J.

Thermo-mechanical stability of forged Ti-26Al-10Nb-3V-1Mo (at.%)
pp. 99-111(13)
Authors: Long M.; Rack H.J.

Controlled generation of internal cracks in polymethyl methacrylate
pp. 113-119(7)
Authors: Li Y.Z.; Chou Y.T.