Surface and Coatings Technology

The electrodeposition of quaternary Fe-Cr-Ni-Mo alloys from the chloride-complexing agents electrolyte. Part I. Processing
pp. 105-110(6)
Authors: Dolati A.G.; Ghorbani M.; Afshar A.

Formation and characterization of BN films with Ti added
pp. 111-116(6)
Authors: Kurooka S.; Ikeda T.; Kohama K.; Tanaka T.; Tanaka A.

Effect of molybdenum on the microstructure and wear resistance of cobalt-base Stellite hardfacing alloys
pp. 117-126(10)
Authors: Shin J.-C.; Doh J.-M.; Yoon J.-K.; Lee D.-Y.; Kim J.-S.

Dry turning of alumina/aluminum composites with CVD diamond coated Co-cemented tungsten carbide tools
pp. 127-134(8)
Authors: Polini R.; Casadei F.; D'Antonio P.; Traversa E.

Spatial distribution of charged particles in a magnetic neutral loop discharge etcher: experimental results and numerical simulations
pp. 135-140(6)
Authors: Sung Y.-M.; Sakoda T.

A tribological study of a novel pre-treatment with linseed oil bonded to mercaptosilane treated aluminium
pp. 141-152(12)
Authors: Bexell U.; Olsson M.; Johansson M.; Samuelsson J.; Sundell P.-E.

Microstructural characterizations of plasma sprayed hydroxyapatite coatings
pp. 153-159(7)
Authors: Deram V.; Minichiello C.; Vannier R.-N.; Le Maguer A.; Pawlowski L.; Murano D.

An analytical solution for stress relaxation in cracked coatings
pp. 160-166(7)
Author: Mezin A.

Effect of a localized thermal treatment process on the electrochemical behaviour of thermally sprayed nickel-based alloy
pp. 167-175(9)
Authors: Wang X.Y.; Li J.F.; Liao H.; Normand B.; Ding C.X.; Coddet C.

Structure and properties of passivating titanium oxide films fabricated by DC plasma oxidation
pp. 176-182(7)
Authors: Leng Y.X.; Chen J.Y.; Yang P.; Sun H.; Huang N.

Hard and wear-resistant titanium nitride films for ceramic cutting tools by pulsed high energy density plasma
pp. 183-188(6)
Authors: Peng Z.; Miao H.; Wang W.; Yang S.; Liu C.; Qi L.

Oxidation behavior of thermal barrier coatings obtained by detonation spraying
pp. 189-194(6)
Authors: Wu Y.N.; Wang F.H.; Hua W.G.; Gong J.; Sun C.; Wen L.S.

Determination of the diffusion coefficient of proton in CVD gamma aluminum oxide thin films
pp. 195-200(6)
Authors: Yu G.T.; Yen S.K.

Concentration profiles of ion exchanged optical waveguides in glass: analysed in hollow cathode plasma
pp. 201-205(5)
Authors: Djulgerova R.; Pantchev B.; Mihailov V.; Gencheva V.; Flaga J.

Adhesion and residual stresses determination of thermally sprayed molybdenum on steel
pp. 206-212(7)
Authors: Laribi M.; Mesrati N.; Vannes A.B.; Treheux D.

Optimisation of carbon implantation pre-treatments on the adhesion strength of amorphous carbon coatings on AISI 440C steel substrates
pp. 213-220(8)
Authors: Shum P.W.; Zhou Z.F.; Li K.Y.

Effect of processing conditions on the corrosion performance of laser surface-melted AISI 440C martensitic stainless steel
pp. 221-230(10)
Authors: Kwok C.T.; Lo K.H.; Cheng F.T.; Man H.C.

Microstructure evolution of AlN films deposited under various pressures by RF reactive sputtering
pp. 231-236(6)
Authors: Cheng H.; Sun Y.; Hing P.

The influences of sealing methods on corrosion behavior of anodized aluminum alloys in NaCl solutions
pp. 237-242(6)
Authors: Zuo Y.; Zhao P.-H.; Zhao J.-M.

Structure and mechanical properties of magnetron sputtered Zr-Ti-Cu-N films
pp. 243-253(11)
Authors: Musil J.; Daniel R.

Bioactivity assessment of titanium sheets electrochemically coated with thick oxide film
pp. 254-258(5)
Authors: de Sena L.A.; Rocha N.C.C.; Andrade M.C.; Soares G.A.

Author Index
pp. 259-259(1)

Subject Index
pp. 260-264(5)