Surface and Coatings Technology

Effects of tungsten carbide thermal spray coating by HP/HVOF and hard chromium electroplating on AISI 4340 high strength steel
pp. 113-124(12)
Authors: Nascimento M.P.; Souza R.C.; Miguel I.M.; Pigatin W.L.; Voorwald H.J.C.

Deep segregation and hardening in Al-Mg-Zn-Cu-Cr alloy treated by plasma source oxygen ion implantation
pp. 125-134(10)
Authors: Bolduc M.; Popovici D.; Terreault B.

Characteristics of laser-densified and conventionally heat treated sol-gel derived silica-titania films
pp. 135-140(6)
Authors: Jiwei Z.; Liangying Z.; Xi Y.; Hodgson S.N.B.

An energy description of hard coating wear mechanisms
pp. 141-148(8)
Authors: Fouvry S.; Kapsa P.

Wear and corrosion behaviour of thermally sprayed cermet coatings
pp. 149-158(10)
Authors: Toma D.; Brandl W.; Marginean G.

Room temperature deposition of titanium carbide thin films using dense plasma focus device
pp. 159-165(7)
Authors: Rawat R.S.; Lee P.; White T.; Ying L.; Lee S.

Surface modification of polycrystalline iron surfaces by n-dodecanethiol: an XPS investigation
pp. 166-172(7)
Authors: Pirlot C.; Delhalle J.; Pireaux J.J.; Mekhalif Z.

Thermal and mechanical stresses in transversely isotropic coatings
pp. 173-184(12)
Authors: Shi Z.; Ramalingam S.

Porous thin films for thermal barrier coatings
pp. 185-191(7)
Authors: Harris K.D.; Vick D.; Gonzalez E.J.; Smy T.; Robbie K.; Brett M.J.

Stresses in coated solids due to normal and shear tractions on an elliptical region
pp. 192-204(13)
Authors: Shi Z.; Ramalingam S.

Leveling effect of sol-gel SiO₂ coatings onto metallic foil substrates
pp. 205-210(6)
Authors: Guillen C.; Martnez M.A.; San Vicente G.; Morales A.; Herrero J.

Wettability effect on the flattening ratio of molten metal droplets
pp. 211-219(9)
Authors: Amada S.; Haruyama M.; Ohyagi T.; Tomoyasu K.

Enhanced microhardness of four modern steels following nitrogen ion implantation
pp. 220-228(9)
Authors: Li M.; Knystautas E.J.; Krishnadev M.

Surface morphologies and electrical properties of antimony-doped tin oxide films deposited by plasma-enhanced chemical vapor deposition
pp. 229-236(8)
Authors: Kim K.-S.; Yoon S.-Y.; Lee W.-J.; Ho Kim K.

Annealing studies of TiN films deposited by plasma-assisted CVD
pp. 237-241(5)
Authors: Cheng Z.; Peng H.-r.; Xie G.-w.; Shi Y.-l.

Mechanical properties of ion-implanted polycarbonate
pp. 242-249(8)
Authors: San J.; Zhu B.; Liu J.; Liu Z.; Dong C.; Zhang Q.

Structural and electrical properties of copper thin films prepared by filtered cathodic vacuum arc technique
pp. 250-255(6)
Authors: Shi J.R.; Lau S.P.; Sun Z.; Shi X.; Tay B.K.; Tan H.S.

Hydrogen plasma treatment of poly(ethylene terephthalate) surfaces
pp. 256-263(8)
Authors: Vasquez-Borucki S.; Achete C.A.; Jacob W.

Mechanical and tribological aspects on a-C films deposited by lamp assisted chemical vapour deposition
pp. 264-268(5)
Authors: Lindstam M.; Wanstrand O.; Boman M.; Piglmayer K.

Debonding study of Ni-base substrate/Pt coatings interfaces using laser shock waves: characterization of the targets and experimental study
pp. 269-277(9)
Authors: Auroux E.; Boustie M.; Romain J.P.; Bertheau D.; Peyre P.; Berthe L.; Bartnicki E.

Influence of sodium saccharin on the electrodeposition and characterization of CoFe magnetic film
pp. 278-283(6)
Authors: Ricq L.; Lallemand F.; P. Gigandet M.; Pagetti J.

Effect of laser irradiation condition on bonding strength in laser plasma hybrid spraying
pp. 284-290(7)
Authors: Hiraga H.; Inoue T.; Matsunawa A.; Shimura H.

Effects of Co on the cracking susceptibility and the microstructure of Fe-Cr-Ni laser-clad layer
pp. 291-295(5)
Authors: Wulin S.; Echigoya J.; Beidi Z.; Changsheng X.; Kun C.

Fabrication of Ti-O/Ti-N duplex coatings on biomedical titanium alloys by metal plasma immersion ion implantation and reactive plasma nitriding/oxidation
pp. 296-300(5)
Authors: Leng Y.X.; Yang P.; Chen J.Y.; Sun H.; Wang J.; Wang G.J.; Huang N.; Tian X.B.; Chu P.K.

Preferential orientation of titanium carbide films deposited by a filtered cathodic vacuum arc technique
pp. 301-306(6)
Authors: Ding X.-z.; Tay B.K.; Tan H.S.; Lau S.P.; Cheung W.Y.; Wong S.P.

Author Index of Volume 138
pp. 307-308(2)

Subject Index of Volume 138
pp. 309-313(5)