Surface and Coatings Technology

Thermal conductivity of EB-PVD thermal barrier coatings evaluated by a steady-state laser heat flux technique
pp. 1-8(8)
Authors: Zhu D.; Miller R.A.; Nagaraj B.A.; Bruce R.W.

Mechanical properties of EB-PVD-thermal barrier coatings by nanoindentation
pp. 9-13(5)
Authors: Lugscheider E.; Bobzin K.; Barwulf S.; Etzkorn A.

Sputter-deposited nanocrystalline Cr and CrN coatings on steels
pp. 14-22(9)
Authors: Seok J.W.; Jadeed N.M.; Lin R.Y.

Surface roughness of diamond-like carbon films prepared using various techniques
pp. 23-32(10)
Authors: Peng X.L.; Barber Z.H.; Clyne T.W.

Structural and mechanical properties of nitrogen ion implanted ultra high molecular weight polyethylene
pp. 33-38(6)
Authors: Chen J.S.; Lau S.P.; Sun Z.; Tay B.K.; Yu G.Q.; Zhu F.Y.; Zhu D.Z.; Xu H.J.

Modeling of temperature fields in the graphite target at pulsed laser deposition of CN_x films
pp. 39-47(9)
Authors: Skrzypczak M.; Bertrand P.; Zdanowski J.; Pawlowski L.

Surface passivation of epoxy resin with a covalently adhered poly(tetrafluoroethylene) layer
pp. 48-55(8)
Authors: Yu Z.J.; Kang E.T.; Neoh K.G.; Tan K.L.

Oxidation behavior of laser remelted plasma sprayed NiCrAlY and NiCrAlY-Al₂O₃ coatings
pp. 56-60(5)
Authors: Wu Y.N.; Zhang G.; Feng Z.C.; Zhang B.C.; Liang Y.; Liu F.J.

Change of magnetic properties of autocatalytically deposited CoNiP films by electrolysis simultaneously applied
pp. 61-70(10)
Authors: Tarozaite R.; Stalnionis G.; Sudavicius A.; Kurtinaitiene M.

Application of a novel vacuum-arc ion-plating technology for the design of advanced wear resistant coatings
pp. 71-76(6)
Authors: Panckow A.N.; Steffenhagen J.; Wegener B.; Dubner L.; Lierath F.

Energy distribution of ions bombarding TiO₂ thin films during sputter deposition
pp. 77-83(7)
Authors: Martin N.; Santo A.M.E.; Sanjines R.; Levy F.

Elaboration and adhesion of zinc oxide coatings on poly-ether-ether-ketone films
pp. 84-94(11)
Authors: Giancaterina S.; Ben Amor S.; Bachari E.M.; Baud G.; Jacquet M.; Perrin C.

In-situ synthesis and wear performance of TiC particle reinforced composite coating on alloy Ti6Al4V
pp. 95-100(6)
Authors: Zhang S.; Wu W.T.; Wang M.C.; Man H.C.

Reaction of WC-Co coating with molten zinc in a zinc pot of a continuous galvanizing line
pp. 101-110(10)
Authors: Seong B.G.; Hwang S.Y.; Kim M.C.; Kim K.Y.

Corrigendum to: ''The use of the loading curve to assess soft coatings'' - [Surf. Coat. Technol. 127, 266-273]
pp. 111-111(1)
Authors: Malzbender J.; de With G.