Surface and Coatings Technology

The development of a functionally graded TiC-Ti multilayer hard coating
pp. 111-115(5)
Authors: Dahan I.; Admon U.; Frage N.; Sariel J.; Dariel M.P.; Moore J.J.

The composite of nitrided steel of H13 and TiN coatings by plasma duplex treatment and the effect of pre-nitriding
pp. 116-121(6)
Authors: Ma S.; Li Y.; Xu K.

Comparison of laser-clad and furnace-melted Ni-based alloy microstructures
pp. 122-135(14)
Authors: Li Q.; Zhang D.; Lei T.; Chen C.; Chen W.

Early stage of diamond formation on carbon/carbon composites
pp. 136-145(10)
Authors: Ting J.-M.; Tseng J.S.

The effect of intrinsic parameters on the critical load as measured with the scratch test method
pp. 146-151(6)
Authors: Randall N.X.; Favaro G.; Frankel C.H.

Field emission properties of two-layer structured SiCN films
pp. 152-157(6)
Authors: Tarntair F.G.; Wu J.J.; Chen K.H.; Wen C.Y.; Chen L.C.; Cheng H.C.

Development of CVD WC-Co coatings
pp. 158-163(6)
Authors: Fitzsimmons M.; Sarin V.K.

Characterization of Cr₂O₃/CrN duplex coatings for injection molding applications
pp. 164-169(6)
Authors: Wang D.-Y.; Chiu M.-C.

A study of the surface products on zinc-coated steel during laser ablation cleaning
pp. 170-174(5)
Authors: Zhou X.; Imasaki K.; Furukawa H.; Umino H.; Sakagishi K.; Nakai S.; Yamanaka C.

Interface analysis of amorphous silicon solar cell structures
pp. 175-180(6)
Authors: Gutierrez M.T.; Maffiotte C.

Composition control of electroplated nickel-phosphorus deposits
pp. 181-187(7)
Authors: Hu C.-C.; Bai A.

An XPS study of the elemental enrichment on aluminum alloy surfaces from chemical cleaning
pp. 188-196(9)
Authors: Moffitt C.E.; Wieliczka D.M.; Yasuda H.K.

Hardness measurements on thin IBAD CN_x films - a comparative study
pp. 197-204(8)
Authors: Malkow T.; Bull S.J.

Formation of highly-oriented and polycrystalline lanthanum nickelate films by a spin coating-pyrolysis process
pp. 205-208(4)
Authors: Hwang K.-S.; Min S.-S.; Park Y.-J.

Formation of TiB₂ whiskers in laser clad Fe-Ti-B coatings
pp. 209-216(8)
Authors: Xibao W.; Yong L.; Songlan Y.

On the application of the work-of-indentation approach to depth-sensing indentation experiments in coated systems
pp. 217-224(8)
Authors: Tuck J.R.; Korsunsky¹ A.M.; Bull S.J.; Davidson R.I.

Microstructure and nanoindentation hardness of Ti/TiN multilayered films
pp. 225-229(5)
Authors: Li T.S.; Li H.; Pan F.

Effect of MoO₂ and TiO₂ on electrodeposition and properties of chromium coating
pp. 230-234(5)
Authors: Surviliene S.; Orlovskaja L.; Bikulcius G.; Biallozor S.

On the selective deposition of tin and tin oxide on various glasses using a high power diode laser
pp. 235-240(6)
Authors: Lawrence J.; Lubrani P.; Li L.

Nucleation and growth of vacuum arc deposited gold films under pulsed bias
pp. 241-245(5)
Authors: Chun S.-Y.; Chayahara A.

Recycling technique for CVD diamond coated cutting tools
pp. 246-248(3)
Authors: Liu H.; Hanyu H.; Murakami Y.; Kamiya S.; Saka M.

Effects of pulse frequency and temperature on the nitride layer and surface characteristics of plasma nitrided stainless steel
pp. 249-254(6)
Authors: Jeong B.-Y.; Kim M.-H.

Improvement of hot forging manufacturing with PVD and DUPLEX coatings
pp. 255-264(10)
Authors: Navinsek B.; Panjan P.; Gorenjak F.

AFM study of SiN_x:H surfaces treated by hydrogen plasma: modification of morphological and scaling characteristics
pp. 265-269(5)
Authors: Park Y.-B.; Rhee S.-W.

Transformation of monetite to hydroxyapatite in bioactive coatings on titanium
pp. 270-276(7)
Authors: Prado Da Silva M.H.; Lima J.H.C.; Soares G.A.; Elias C.N.; de Andrade M.C.; Best S.M.; Gibson I.R.

On glow-discharge sputtering of iron and steels in a commercial deposition plant
pp. 277-283(7)
Authors: Kringhoj P.; Budtz-Jorgensen C.V.; Find Nielsen J.; Bottiger J.; Eskildsen S.S.; Mathiasen C.

Influence of various nickel under-layers on the corrosion behaviour of AlN films deposited by reactive sputtering
pp. 284-292(9)
Authors: Vacandio F.; Massiani Y.; Eyraud M.; Rossi S.; Fedrizzi L.

Tribology and application of Ti-C:H- and Cr-C:H-coated cemented tungsten carbide substrates
pp. 293-303(11)
Authors: Su Y.L.; Kao W.H.