International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts

Sandstone hosted gold deposits: a new exploration target is recognized in Peru
pp. 241A-241A(1)
Authors: Montoya D.E.; Noble D.C.; Eyzaguirre V.R.; DesRosiers D.F.

Structural analysis for folded deposits
pp. 241A-241A(1)
Author: Newton M.J.

Microstrain stability of Peninsular India 1864-1994
pp. 241A-241A(1)
Author: Paul J.

Coalification pattern of Jixi coalfield (in Chinese)
pp. 241A-241A(1)
Authors: Hu S.; Yang Q.; Pan Z.

Sea cliff erosion caused by a storm drain failure
pp. 241A-241A(1)
Authors: Day R.W.; Poland D.M.

The Edgerton landslides
pp. 241A-241A(1)
Authors: Cruden D.M.; Thomson S.; Kim H.J.; Peterson A.E.

Slope failures in southern California: rainfall threshold, prediction, and human causes
pp. 241A-242A(2)
Authors: Slosson J.E.; Larson R.A.

Rockslide processes on the north slope of Popocatepetl volcano, Mexico
pp. 242A-242A(1)
Author: Palacios D.

Impact of erosion, mass wasting, and sedimentation on human activities in the Rio Grande Basin, Jujuy Province, Argentina
pp. 242A-242A(1)
Authors: Chayle W.; Wayne W.J.

Flow slides in the Netherlands: experience and engineering practice
pp. 242A-242A(1)
Authors: Silvis F.; De Groot M.B.

Manifestation of natural electromagnetic pulse emission on landslide slopes
pp. 242A-242A(1)
Author: Kharkhalis N.R.

The landslide at La Clapiere: monitoring and prediction of failure
pp. 242A-242A(1)
Author: Rat M.

Insights into the behaviour of the large deep seated gravitational slope deformation of Rosone, in the Piemont region (Italy)
pp. 242A-242A(1)
Authors: Barla G.; Chiriotti E.

Valtellina 1987, the Val Pola landslide: nature and cause of the phenomenon, first emergency interventions, final plan of interventions
pp. 242A-242A(1)
Authors: Lunardi P.; Agostoni S.; Presbitero M.

Large landslides and possibilities of sudden reactivation
pp. 242A-243A(2)
Authors: Bonnard C.; Noverraz F.; Lateltin O.; Raetzo H.

A critical overview of the geotechnical studies at the Na'ur Landslide No.4 in Jordan: causes and measures
pp. 243A-243A(1)
Author: Al-Homoud A.S.

Geohydrologic studies of a landslide: the Unwana Beach landslide
pp. 243A-243A(1)
Author: Ojiegbe R.U.

Petrographic characterization and the state of the stone of the main N-NE facade of the Roman tower at Loches, Turenna, France
pp. 243A-243A(1)
Authors: Antonelli F.; Dessandier D.

Salt impact on brickwork along the canals of Venice
pp. 243A-243A(1)
Authors: Bakolas A.; Biscontin G.; Moropoulou A.; Zendri E.

Travertine the restoration stone for the Zagreb Cathedral
pp. 243A-243A(1)
Authors: Crnkovic B.; Poggi F.

The adverse effects of nitrates on stone monuments
pp. 243A-243A(1)
Authors: Sikiotis D.; Kirkitsos P.

A concise history of mainstream seismology: origins, legacy, and perspectives
pp. 243A-243A(1)
Author: Ben-Menahem A.

A database for worldwide seismicity quantification
pp. 243A-244A(2)
Authors: Schmid E.; Schaad W.

Earthquake forecasting using subsatellite seismic information system
pp. 244A-244A(1)
Authors: Mekthiev A.S.; Gummatov A.B.; Seidov M.M.

Preliminary work on an early warning and rapid response program for moderate earthquakes
pp. 244A-244A(1)
Authors: Scrivner C.W.; Helmberger D.V.

Characteristics of surface waves generated by events on and near the Chinese nuclear test site
pp. 244A-244A(1)
Authors: Levshin A.L.; Ritzwoller M.H.

Mapping seismic hazard in the central and eastern United States
pp. 244A-244A(1)
Author: Frankel A.

Source parameters and crustal Q for four earthquakes in South Carolina
pp. 244A-245A(2)
Author: Fletcher J.B.

Earthquake damage to buildings by the 1992 Cairo earthquake
pp. 245A-245A(1)
Author: Hiraishi H.

Segmentation and seismic hazard along the Great Sumatran Fault, Indonesia
pp. 245A-245A(1)
Authors: Beaudouin T.; Bellier O.; Sebrier M.

The probability of very large earthquakes in Sumatra
pp. 245A-245A(1)
Authors: Jichun S.; Tso-Chien P.

Damage of buildings due to the Flores Island Indonesia earthquake of December 12, 1992
pp. 245A-245A(1)
Author: Nakata S.

A hydrogeological database for Honduras
pp. 245A-245A(1)
Author: McKenzie A.A.

Groundwater level archive for England and Wales
pp. 245A-246A(2)
Author: Doorgakant P.

Hydrological monograph of the Wloclawek Reservoir
pp. 246A-246A(1)
Authors: Babinski Z.; Grzes M.

A simple procedure for groundwater investigation and geochemically based groundwater mapping in Bremen
pp. 246A-246A(1)
Authors: Ortlam D.; Sauer M.

An analytical groundwater modeling approach for natural resources utilizing GIS
pp. 246A-246A(1)
Authors: Oloufa A.A.; El-Kadi A.I.; Eltahan A.A.; Malik H.U.

Remote sensing of tectonic fabric controlling groundwater flow in Dinaric karst
pp. 246A-247A(2)
Author: Kresic N.

Application of uncertainty analysis to groundwater pollution modelling
pp. 247A-247A(1)
Authors: Bobba A.G.; Singh V.P.; Bengtsson L.

An analysis of perturbation based methods for the treatment of parameter uncertainty in numerical groundwater models
pp. 247A-247A(1)
Author: Connell L.D.

Continuous transmissivity transitions for horizontal groundwater flow models
pp. 247A-247A(1)
Authors: Odenwald B.; Stamm J.; Herrling B.

Mixed finite elements for accurate particle tracking in saturated groundwater flow
pp. 247A-247A(1)
Author: Kaasschieter E.F.

Three-dimensional groundwater flow near narrow surface water bodies
pp. 247A-247A(1)
Authors: Meigs L.C.; Bahr J.M.

Prediction of groundwater flow
pp. 247A-247A(1)
Author: Zhao J.

A groundwater trace study using a fluorescent dye
pp. 247A-247A(1)
Authors: Townend M.; Aldridge R.

Field-based determination of air diffusivity using soil air and atmospheric pressure time series
pp. 247A-247A(1)
Authors: Rojstaczer S.; Tunks J.P.

Research into the mobility of a gas phase within a porous network
pp. 247A-248A(2)
Authors: Boltze U.; De Freitas M.H.

Inverting fluid conductivity logs for fracture inflow parameters
pp. 248A-248A(1)
Author: Evans D.G.

Effective hydraulic conductivities in unsaturated heterogeneous media by Monte Carlo simulation
pp. 248A-248A(1)
Authors: Eaton R.R.; McCord J.T.

Measurements of water potential and water content in unsaturated crystalline rock
pp. 248A-248A(1)
Authors: Schneebeli M.; Fluhler H.; Gimmi T.; Wydler H.; Laser H.-P.; Baer T.

Large-scale averaging analysis of multiphase flow in fractured reservoirs
pp. 248A-248A(1)
Author: Zhangxin C.

Flow pattern analysis for a well defined by point sinks
pp. 248A-248A(1)
Authors: Nieuwenhuizen R.; Zijl W.; Van Veldhuizen M.

Characterization of leaky faults: study of water flow in aquifer-fault-aquifer systems
pp. 248A-248A(1)
Authors: Chao S.; Javandel I.; Witherspoon P.A.

Slug tests in elastic, unconfined aquifers: incorporating the free surface
pp. 248A-249A(2)
Authors: Belitz K.; Dripps W.; Fairchild J.E.

Advective and dispersive mixing in stratified formations
pp. 249A-249A(1)
Authors: Urroz G.E.; Yang M.; Kemblowski M.W.

Experimental investigation of solute transport in large, homogeneous and heterogeneous, saturated soil columns
pp. 249A-249A(1)
Authors: K. H.; Toride N.; Van Genuchten M.T.

Hydrofacies distribution and correlation in the Miami Valley aquifer system
pp. 249A-249A(1)
Authors: Ritzi R.W.; Dominic D.F.; Brown N.R.; Kausch K.W.; McAlenney P.J.; Basial M.J.

European roofing slates. Part 2: geological selected examples of slate deposits
pp. 249A-249A(1)
Authors: Wagner W.; Le Bail R.; Hacar-Rodriguez M.P.; Stanek S.

Mining/milling processes and tailings generation
pp. 249A-249A(1)
Author: Poling G.W.

Evaluation of geotechnical and hydrogeological properties of wastes
pp. 249A-249A(1)
Author: Beaven R.P.

Use of gravel washing silt in the domain of drinking water storage, geothermal storage and contaminant confinement
pp. 249A-249A(1)
Authors: De Los Cobos G.; Parriaux A.

Sand sampling below the water table using the 200 mm diameter Laval sampler
pp. 249A-250A(2)
Authors: Konrad J.-M.; St-Laurent S.; Gilbert F.; Leroueil S.

In-situ characterization technique for screening contaminated soils
pp. 250A-250A(1)
Authors: Jaselskis E.J.; Anderson M.S.; D'Silva A.P.; Baldwin D.P.; Zamzow D.S.

Petrology and diamonds
pp. 250A-250A(1)
Author: Smith B.H.S.

Overview of calcite/opal deposits at or near the proposed high-level nuclear waste site, Yucca Mountain, Nevada, USA: pedogenic, hypogene, or both?
pp. 250A-250A(1)
Authors: Hill C.A.; Dublyansky Y.V.; Harmon R.S.; Schluter C.M.

Microbiological, chemical, and mineralogical characterization of the Kidd Creek mine tailings impoundment, Timmins area, Ontario
pp. 250A-250A(1)
Authors: Blowes D.W.; Al T.; Lortie L.; Gould W.D.; Jambor J.L.

Management of uranium mill tailing: geochemical processes and radiological risk assessment
pp. 250A-250A(1)
Authors: Fernandes H.M.; Franklin M.R.; Veiga L.H.S.; Freitas P.; Gomiero L.A.

Occurrence of fibrous minerals in limestone mines and rock aggregate quarries in Finland
pp. 250A-250A(1)
Author: Junttila S.

Geological and geophysical characteristics of rocks of the enclosing and productive crustal masses of the northern part of the Krivoi Rog region
pp. 250A-250A(1)
Authors: Krasovskii S.S.; Poznanskaya N.F.; Yaroshchuk E.A.

Experimental strain analysis of Clarens Sandstone colonised by endolithic lichens
pp. 250A-251A(2)
Authors: Wessels D.; Venter D.; Wessels W.; Wessels L.

Effective stress principle for saturated fractured porous media
pp. 251A-251A(1)
Authors: Tuncay K.; Corapcioglu M.Y.

Numerical simulation of shear band formation with a hypoplastic constitutive model
pp. 251A-251A(1)
Authors: Tejchman J.; Wu W.

An experimental examination of the critical state and other similar concepts for granular soils
pp. 251A-251A(1)
Author: Chu J.

Weathering effects on the geotechnical properties of argillaceous sediments in tropical environments and their geomorphological implications
pp. 251A-251A(1)
Authors: Chen-Hui F.; Allison R.J.; Jones M.E.

Using saturation water percentage data to predict mechanical composition of soils
pp. 251A-251A(1)
Authors: Mbagwu J.S.C.; Okafor D.O.

Mechanistic approach to the shear strength behaviour of allophanic soils
pp. 251A-251A(1)
Author: Rao S.M.

Uniaxial strength testing of non-welded Calico Hills tuff, Yucca Mountain, Nevada
pp. 251A-251A(1)
Authors: Schultz R.A.; Li Q.

Geological and geotechnical properties of the 'Terres Noires' in southeastern France: weathering, erosion, solid transport and instability
pp. 251A-251A(1)
Authors: Antoine P.; Giraud A.; Meunier M.; Van Asch T.

Engineering characteristics and uses of duricrusts in Australia
pp. 252A-252A(1)
Author: McNally G.H.

The influence of parent rock factor on some engineering index properties of three residual lateritic soils in southwestern Nigeria
pp. 252A-252A(1)
Author: Adeyemi G.O.

Stress-strain behaviour of three compacted lateritic gravel from western Senegal using the shear box machine
pp. 252A-252A(1)
Authors: Fall M.; Tisot J.-P.; Cisse I.K.

Engineering properties of two types of pulverized fuel ash
pp. 252A-252A(1)
Authors: Mahmoud M.; Morley R.S.

Engineering geological characterization of coal mine waste material and an evaluation in the context of back-analysis of spoil pile instabilities in a strip mine, SW Turkey
pp. 252A-252A(1)
Authors: Ulusay R.; Arikan F.; Yoleri M.F.; Caglan D.

Engineering properties and disposal of gypsum waste
pp. 252A-252A(1)
Authors: Griffin A.R.; Bentley S.P.

Cyclic deformation and strength of Dashihe mine slimes (in Chinese)
pp. 252A-252A(1)
Authors: Xin H.; Wang Y.

Computer modelling of granular material microfracturing
pp. 252A-252A(1)
Authors: Malan D.F.; Napier J.A.L.

An interface model for analysis of deformation behaviour of discontinuities
pp. 253A-253A(1)
Authors: Mroz Z.; Giambanco G.

Use of a two-dimensional finite-element model for studying fracture processes
pp. 253A-253A(1)
Author: Kalabegishvili M.A.

Tensile cracking in concrete and sandstone: part 1 - basic instruments
pp. 253A-253A(1)
Authors: Vervuurt A.; Schlangen E.; Van Mier J.G.M.

Effect of microfissures on the engineering properties of the marble at Wadi Lisb, Saudi Arabia
pp. 253A-253A(1)
Authors: Al-Lahyani K.; Shehata W.M.; Sabtan A.A.

Nonlinear behavior of soil sediments identified by using borehole records observed at the Ashigara Valley, Japan
pp. 253A-253A(1)
Authors: Satoh T.; Sato T.; Kawase H.

Time-dependent behaviour of deep clays
pp. 253A-253A(1)
Authors: Giraud A.; Rousset G.

Improvement of strain probe method for soil creep measurement
pp. 253A-253A(1)
Authors: Yamada S.; Kurashige Y.

Surface dynamics of a granular material
pp. 254A-254A(1)
Author: De Gennes P.-G.

Material property changes in granitic rock during long-term immersion in hot water
pp. 254A-254A(1)
Authors: Suzuki K.; Oda M.; Kuwahara T.; Hirama K.

Model evaluation of wetability effect on rock resistivity (in Chinese)
pp. 254A-254A(1)
Author: Huang L.-J.

Examination of microstructural features of Norwegian cataclastic rocks and their use for predicting alkali-reactivity in concrete
pp. 254A-254A(1)
Author: Wigum B.J.

Absorbent method for measuring solute activities in unsaturated soils: thermodynamics and preliminary experiments
pp. 254A-254A(1)
Authors: Snyder V.A.; Martinez G.A.; Vazquez M.; Pena L.; Cavallaro N.

Freezing point depression of soil water as a function of mineral composition and physical properties
pp. 254A-254A(1)
Author: Kozlowski T.

Factors affecting the soil sorption of iodine
pp. 254A-254A(1)
Authors: Sheppard M.I.; Thibault D.H.; McMurry J.; Smith P.A.

Laboratory simulation of periglacial solifluction: significance of porewater pressures, moisture contents and undrained shear strengths during soil thawing
pp. 254A-255A(2)
Authors: Harris C.; Davies M.C.R.; Coutard J.-P.

Structure and chemical properties of surface layers developed on R7T7 simulated nuclear waste glass altered in brine at 190^oC
pp. 255A-255A(1)
Authors: Abdelouas A.; Crovisier J.-L.; Lutze W.; Muller R.; Bernotat W.

Evaluation of the quality of the raw materials for cement manufacture during geological exploration. Some observations on Eastern and Western European practice
pp. 255A-255A(1)
Authors: Ilic M.; Shaw C.T.

The engineering of a cementitious barrier
pp. 255A-255A(1)
Authors: Claisse P.A.; Unsworth H.P.; Bentley S.P.

Suction-controlled oedometer tests in montmorillonite clay: preliminary results
pp. 255A-255A(1)
Authors: Villar M.V.; Martin P.L.; Bentley S.P.

Diffusion of contaminants through a clay barrier under acidic conditions
pp. 255A-255A(1)
Authors: Mohamed A.M.O.; Yong R.N.; Bentley S.P.

A model for adsorption of organic species by clays and commercial landfill barrier materials
pp. 255A-255A(1)
Authors: Davies M.C.R.; Railton L.M.R.; Williams K.P.; Bentley S.P.

Measurement of the adsorption of radiocaesium on clays: factors affecting the extrapolation to in situ conditions
pp. 255A-255A(1)
Authors: Staunton S.; Roubaud M.

A review of the ANDRA's research programmes on the thermo-hydromechanical behavior of clay in connection with the radioactive waste disposal project in deep geological formations
pp. 256A-256A(1)
Authors: Felix B.; Lebon P.; Miguez R.; Plas F.

Modelling hygro-thermo-mechanical behaviour of engineered clay barriers - validation phase
pp. 256A-256A(1)
Authors: Onofrei C.; Gray M.

Critical issues in modelling the long-term hydro-thermomechanical performance of natural clay barriers
pp. 256A-256A(1)
Authors: Gera F.; Hueckel T.; Peano A.

Overview of in-situ thermomechanical experiments in clay: concept, results and interpretation
pp. 256A-256A(1)
Authors: Bernier F.; Neerdael B.

Benchmarking the thermomechanical behaviour of clays - a progress report - the CEC interclay project
pp. 256A-256A(1)
Authors: Knowles N.C.; Jeffries R.M.; Come B.

Heat-induced moisture movement in a clay barrier I. Experimental modelling of borehole emplacement
pp. 256A-256A(1)
Author: Selvadurai A.P.S.

Heat-induced moisture movement in a clay barrier II. Computational modelling and comparison with experimental results
pp. 256A-256A(1)
Author: Selvadurai A.P.S.

The influence of temperature on mechanical characteristics of Boom clay: the results of an initial laboratory programme
pp. 256A-256A(1)
Authors: De Bruyn D.; Thimus J.-F.

Physico/chemical stability of smectite clays
pp. 256A-257A(2)
Authors: Pusch R.; Karnland O.

Thermomechanical properties of deep argillaceous formations
pp. 257A-257A(1)
Authors: Del Olmo C.; Fioravante V.; Gera F.; Hueckel T.; Mayor J.C.; Pellegrini R.

Modelling of the physical behaviour of clay barriers close to water saturation
pp. 257A-257A(1)
Authors: Borgesson L.; Karnland O.; Johannesson L.-E.

A constitutive thermomechanical model for saturated clays
pp. 257A-257A(1)
Authors: Robinet J.-C.; Rahbaoui A.; Plas F.; Lebon P.

A note on thermomechanical anisotropy of clays
pp. 257A-257A(1)
Authors: Hueckel T.; Pellegrini R.

Evaluation of coupled heat and moisture flow parameters in a bentonite-sand buffer material
pp. 257A-257A(1)
Authors: R. N.Y.; Mohamed A.-M.O.

Effects of heat/water flow interaction on compacted bentonite: preliminary results
pp. 257A-257A(1)
Authors: Villar M.V.; Cuevas J.; Martin P.L.

Moisture movement under a temperature gradient in highly compacted bentonite
pp. 257A-257A(1)
Authors: Kanno T.; Kato K.; Yamagata J.

On the development of a model of the thermo-mechanical-hydraulic behaviour of unsaturated soils
pp. 257A-257A(1)
Authors: Thomas H.R.; Y. H.; Sansom M.R.; C. L.W.L.

Effects of temperature on strength and compressibility of sand-bentonite buffer
pp. 257A-258A(2)
Authors: Lingnau B.E.; Graham J.; Yarechewski D.; Tanaka N.; Gray M.N.

The adobe reaction and the use of loess mud in construction
pp. 258A-258A(1)
Authors: Rogers C.D.F.; Smalley I.J.

A simple apparatus for measuring the permeability of borehole core
pp. 258A-258A(1)
Authors: Jermy C.A.; Venter B.J.

Permeability considerations about rock foundation on waste disposal
pp. 258A-258A(1)
Authors: Foyo A.; Tomillo C.

Application of percolation theory by the assessment of permeability enhancement by micro-hydrofracturing for in situ copper leaching
pp. 258A-258A(1)
Authors: Yegulalp T.M.; K. K.

Determination of porosity and matrix density of rocks, using data on bulk density and temperature characteristics of sections of boreholes
pp. 258A-258A(1)
Authors: Vygovsky V.F.; Zhuravlev A.F.

Dispersion in consolidated sandstone with radial flow
pp. 258A-258A(1)
Authors: W. K.; Hayes R.E.; Nasr-El-Din H.A.

Examining the use of time domain reflectometry for measuring liquid water content in frozen soil
pp. 258A-258A(1)
Authors: Spaans E.J.A.; Baker J.M.

Modelling in situ water uptake in a bentonite-sand barrier
pp. 258A-258A(1)
Authors: Thomas H.R.; Rees S.W.; Kjartanson B.; A. W.L.W.; Chandler N.A.

The containment properties of glacial tills: a case study from Hardwick Airfield, Norfolk
pp. 258A-259A(2)
Author: Gray J.M.

Determination of the non-saturated permeability of clay materials of low porosity
pp. 259A-259A(1)
Authors: Robinet J.C.; Rhattas M.

Factors affecting the containment properties of natural clays
pp. 259A-259A(1)
Authors: Arch J.; Stevenson E.; Maltman A.

An assessment of permeability of clay liners: two case histories
pp. 259A-259A(1)
Authors: Langdon N.J.; Hussaini M.J.A.; Walden P.J.; Sangha C.M.

Evaluation of clays as linings to landfill
pp. 259A-259A(1)
Authors: Murray E.J.; Rix D.W.; Humphrey R.D.

Particle packing in loess deposits and the problem of structure collapse and hydroconsolidation
pp. 259A-259A(1)
Authors: Dijkstra T.A.; Smalley I.J.; Rogers C.D.F.

A proposed method of estimating the swelling characteristics of soils: some examples from Greece
pp. 259A-259A(1)
Authors: Tsiambaos G.; Tsaligopoulos C.

Computer construction of fractal soil structures: simulation of their hydraulic and shrinkage properties
pp. 259A-260A(2)
Authors: Perrier E.; Mullon C.; Rieu M.; De Marsily G.

The dynamic instability of soils
pp. 260A-260A(1)
Author: Vosnesenskiy Y.V.

Locally generated surface waves in Santa Clara Valley: analysis of observations and numerical simulation
pp. 260A-260A(1)
Authors: Pei D.; Papageorgiou A.S.

A coherency model for spatially varying ground motions
pp. 260A-260A(1)
Author: Der Kiureghian M.

Elastodynamic Green's functions for a smoothly heterogeneous half-space
pp. 260A-260A(1)
Authors: Guzina B.B.; Pak R.Y.S.

Subbituminous coal and its classification in China
pp. 260A-260A(1)
Authors: Chen P.; Zhang Y.

In situ ground stresses in the Abitibi mining district
pp. 260A-260A(1)
Author: Arjang B.

Evaluation of in-situ stresses based on leak-off tests data. Bibliographic analysis and application to field examples
pp. 260A-261A(2)
Author: Sarda J.P.

ISIS: an Instrument for measuring erosion Shear stress In Situ
pp. 261A-261A(1)
Authors: Williamson H.J.; Ockenden M.C.

Geotechnical investigations for a deep radioactive waste repository: in situ stress measurements
pp. 261A-261A(1)
Authors: Christiansson R.; Scarrow J.A.; Whittlestone A.P.; Wikman A.

Prognostic estimation of the stress state of plagiogranites along the section of the Krivoi Rog ultradeep borehole (Ukraine)
pp. 261A-261A(1)
Authors: Korchin V.A.; Lebedev T.S.; Burtnyi P.A.; Kurlov N.S.

The current situation of in-situ stress measurements in tunnelling
pp. 261A-261A(1)
Authors: Bock H.; Hartkorn P.

Investigations and considerations of the state of stress and ground movements
pp. 261A-261A(1)
Authors: Hammer H.; Niedermeyer S.; Niedermeyer T.

Advanced analysis of geotechnical displacement monitoring data new tools and examples of application
pp. 261A-261A(1)
Authors: Steindorfer A.F.; Schubert W.; Rabensteiner K.

Surveying during a Siberian winter
pp. 261A-261A(1)
Authors: Obinyakov V.; Kopylov A.

An evaluation of environmental geology of Pingshan new city site in reservoir region of Xiangjiaba waterpower station (in Chinese)
pp. 261A-261A(1)
Authors: Hu X.; Liu H.; Chen M.; Li K.

Using satellite imagery, CAD, and GPS to develop an environmental and engineering baseline
pp. 261A-262A(2)
Authors: Ellis J.M.; Goodwin P.B.

Integration of remotely sensed satellite images with a geographical information system
pp. 262A-262A(1)
Authors: Mattikalli N.M.; Devereux B.J.; Richards K.S.

The use of Landsat Thematic Mapper imagery for analysing lithology and structure of Korucu-Dugla area in western Turkey
pp. 262A-262A(1)
Authors: Nalbant S.S.; Alptekin O.

Possibilities and limitations of geological interpretation from ERS1 SAR images
pp. 262A-262A(1)
Author: Chorowicz J.

Digital lithology mapping from airborne geophysical and remote sensing data in the Melville Peninsula, northern Canada, using a neural network approach
pp. 262A-262A(1)
Authors: P. A.; C. F.C.; Rencz A.N.

Spectroradiometric discrimination of laterites with principal components analysis and additive modeling
pp. 262A-262A(1)
Authors: Galvao L.S.; Vitorello I.; Paradella W.R.

Determination of the rocks from the spectral brightness of the satellite images
pp. 262A-262A(1)
Authors: Usmanov F.A.; Rachimova E.E.

Photolineament factor: a new computer-aided method for remotely sensing the degree to which bedrock is fractured
pp. 262A-262A(1)
Author: Hardcastle K.C.

Analysis of linear features mapped in Landsat Thematic Mapper and side-looking airborne radar images of the Reno 1^o by 2^o quadrangle, Nevada and California: implications for mineral resource studies
pp. 262A-262A(1)
Authors: Rowan L.C.; Bowers T.L.

A ground follow-up study of aeroradiometric anomalies in Ikom, south-east Nigeria
pp. 263A-263A(1)
Author: Uwah E.J.

A simple technique to identify magnetic anomalies due to kimberlite pipes
pp. 263A-263A(1)
Author: Keating P.

Analyzing shallow faulting at a site in the Wasatch fault zone, Utah, USA, by integrating seismic, gravity, magnetic, and trench data
pp. 263A-263A(1)
Authors: Benson A.K.; Mustoe N.B.

Engineering-geological mapping of tropical soils for land-use planning and geotechnical purposes: a case study from Jamaica, West Indies
pp. 263A-263A(1)
Author: Maharaj R.J.

A preliminary design approach for Guledar irrigation dam project
pp. 263A-263A(1)
Authors: Ozsan A.; Karpuz C.

Proposal for methodology to be applied to road construction in the karstified carbonate and clastic (flysch) terrains in southern Croatia
pp. 263A-263A(1)
Authors: Sestanovic S.; Roda C.; Andric M.

Quantification, identification and physical properties of sediments from the reservoir of Sidi Saad dam, central Tunisia
pp. 263A-263A(1)
Author: Mammou A.B.

Significance of discontinuity surveying in motorway alignment selection, southern Turkey
pp. 264A-264A(1)
Author: Yilmazer I.

Ground geophysical study for development and exploration of El Missikat radioactive minerals prospect, central Eastern Desert of Egypt
pp. 264A-264A(1)
Authors: Elkattan E.M.; Sadek H.S.; Rabie S.I.; Hassanein H.I.

Use of geophysical surveys during the planning, construction and remediation of landfills
pp. 264A-264A(1)
Authors: Reynolds J.M.; Taylor D.I.

Formalized tracing of faults using geophysical data
pp. 264A-264A(1)
Author: Tyapkin O.K.

Improvements in shallow high-resolution seismic reflection through PC-based systems
pp. 264A-264A(1)
Authors: Miller R.D.; Markiewicz R.D.; Merey C.; Jianghai X.; Maples C.G.

Anisotropic features of geometry and permeability in fractured rock masses
pp. 264A-264A(1)
Authors: Xing Z.; Sanderson D.J.

Surface wave measurements for the location of waste deposits: a field study
pp. 264A-264A(1)
Authors: Schneider C.; Dresen L.

Geological investigation of dipping beds with analytical forward modelling
pp. 264A-264A(1)
Author: Gyulai A.

Basis for a flexible low-cost automated resistivity data acquisition and analysis system
pp. 264A-265A(2)
Authors: Meju M.A.; Montague M.

Application of a geomembrane leak location survey at a UK waste disposal facility
pp. 265A-265A(1)
Authors: Mosley N.G.; Crozier F.; Bentley S.P.

Geomagnetism applications
pp. 265A-265A(1)
Author: Campbell W.H.

Temperature measuring technique using infra-red radiation (in Chinese)
pp. 265A-265A(1)
Authors: Cheng W.; Liu Y.

Well logging, atom and geology
pp. 265A-265A(1)
Author: Serra O.

CLAIM: a new personal computer-assisted simulation model for teaching mineral exploration techniques
pp. 265A-265A(1)
Authors: Bauchau C.; Jaboyedoff M.; Vannier M.

A geochemical data management system for radioactive waste repository feasibility investigations
pp. 265A-265A(1)
Authors: Nathanail C.P.; Bentley S.P.

The use of text databases in the management of exploration data
pp. 265A-265A(1)
Author: Mallender S.C.R.

Finite-difference modeling of faults and fractures
pp. 265A-266A(2)
Authors: Coates R.T.; Schenberg M.

Simple effective resistivity-depth transformations for in-field or real-time data processing
pp. 266A-266A(1)
Author: Meju M.A.

A comparison of kriging, co-kriging and kriging combined with regression for spatial interpolation of horizon depth with censored observations
pp. 266A-266A(1)
Authors: Knotters M.; Brus D.J.; Voshaar J.H.O.

Application of the new ONORM B 2203 in advance related classification system for TMB headings
pp. 266A-266A(1)
Author: Lauffer H.

Monitoring of mass movements
pp. 266A-266A(1)
Author: Wunderlich T.A.

Risk assessment: where are we, and where are we going?
pp. 266A-266A(1)
Authors: Jefferies M.; Hall D.; Hinchliff J.; Aiken M.

The use of virtual reality to aid risk assessment in underground situations
pp. 266A-266A(1)
Authors: McClarnon D.J.; Denby B.; Schofield D.

Probable risk estimation due to reservoir induced seismicity at Jamrani dam project, Kumaon Himalaya, India
pp. 266A-266A(1)
Author: Sharma V.K.

Numerical modelling of discontinuous rock mass in the elastic domain
pp. 266A-266A(1)
Authors: Kovacevic-Zelic B.; Kovacic D.; Vujec S.

Numerical modelling of discontinuous rock mass in the plastic domain
pp. 267A-267A(1)
Authors: Kovacevic-Zelic B.; Kovacic D.; Vujec S.

What is an exploration model anyway? An analysis of the cognitive development and use of models in mineral exploration
pp. 267A-267A(1)
Authors: Henley R.W.; Berger B.R.

The IUGS/UNESCO Deposit Modeling Program
pp. 267A-267A(1)
Authors: Cunningham C.G.; Allcott G.H.; Ovenshine A.T.; Green S.B.

Problems and opportunities for mineral deposit models
pp. 267A-267A(1)
Author: Barton P.B.

Application of deposit models to exploration
pp. 267A-267A(1)
Author: Thompson J.F.H.

Spatial mineral deposit models and the prediction of undiscovered mineral deposits
pp. 267A-267A(1)
Authors: Bliss J.D.; Menzie W.D.

The development and use of mineral deposit models in the United States Geological Survey
pp. 267A-267A(1)
Author: Cox D.P.

PROSPECTOR II - an expert system for mineral deposit models
pp. 267A-267A(1)
Author: McCammon R.B.

GEOMODEL - an expert system for modeling layered geological sequences applied to the assessment of coalfields
pp. 267A-268A(2)
Author: Hughes J.D.

Development of grade and tonnage models for different deposit types
pp. 268A-268A(1)
Author: Singer D.A.

Developing a GIS for a complex site: US Borax Inc
pp. 268A-268A(1)
Author: Hillman B.A.

Hard facts on software
pp. 268A-268A(1)
Author: Bond A.

Application of the STRATA3 visualization software to the investigation of landfill sites
pp. 268A-268A(1)
Authors: Masmoum A.A.; Bentley S.P.

Structuring soil and rock descriptions for storage in geotechnical databases
pp. 268A-268A(1)
Authors: Toll D.G.; Oliver A.J.

Project databases: standards and security
pp. 268A-268A(1)
Author: Henley S.

Elimination of blast hole 'cut-offs' in an opencast mine using software packages, laboratory tests and field experiments
pp. 268A-269A(2)
Authors: Roy P.P.; Dhar B.B.

Empirical design in geotechnics using neural networks
pp. 269A-269A(1)
Author: A. T.C.G.

Modelling unknown structural systems through the use of neural networks
pp. 269A-269A(1)
Authors: Chassiakos A.G.; Masri S.F.

A fuzzy neural network approach to evaluation of slope failure potential
pp. 269A-269A(1)
Authors: S. H.N.; P. C.L.; C. H.J.

Modelled on reality
pp. 269A-269A(1)
Author: Shirley G.

Estimation of parameters in geotechnical back analysis - I. Maximum likelihood approach
pp. 269A-269A(1)
Authors: Ledesma A.; Gens A.; Alonso E.E.

Estimation of parameters in geotechnical backanalysis - II. Application to a tunnel excavation problem
pp. 269A-269A(1)
Authors: Gens A.; Ledesma A.; Alonso E.E.

Finite layer analysis of vertically loading piles and pile groups
pp. 269A-269A(1)
Authors: Southcott P.H.; Small J.C.

The use of infinite element
pp. 269A-269A(1)
Author: Y. M.C.

On the numerical modeling of convex particle assemblies with friction
pp. 269A-269A(1)
Author: Tzaferopoulos M.A.

Changing imperatives of architecture affecting dimension stone use in world commerce
pp. 269A-270A(2)
Authors: McDonald W.H.; Carr D.D.

Geotechnical investigations for a deep radioactive waste repository: drilling
pp. 270A-270A(1)
Authors: Ball T.G.; Beswick A.J.; Scarrow J.A.

A discussion on designing the orientator used in inclined and vertical drillings (in Chinese)
pp. 270A-270A(1)
Author: Xu J.

Cutting through Clwyd
pp. 270A-270A(1)
Author: Russell L.

Blast-induced rock movement modelling for Nevada gold mines
pp. 270A-270A(1)
Authors: Gilbride L.; Taylor S.; Songlin Z.; Daemen J.J.K.; Mousset-Jones P.

Development of an empirical dynamic simulator for the analysis of control strategies in an autogenous grinding circuit
pp. 270A-270A(1)
Authors: Valenzuela J.; Del Villar R.; Bourassa M.; St.Arnaud S.

Cuttability assessment of hard coal seams
pp. 270A-270A(1)
Authors: Singh R.; Singh J.K.; Singh T.N.; Dhar B.B.

Orientation and theoretical base for development of working mechanism of coal mining machine (in Chinese)
pp. 270A-270A(1)
Authors: Sun Q.; Sun J.; Wang B.

Experimental study of failure patterns of a drag bit
pp. 271A-271A(1)
Authors: Schmidt L.C.; She T.Z.

Performance- and cutter-wear prediction for tunnel boring machines
pp. 271A-271A(1)
Author: Gehring K.

Strata control - the state of the art
pp. 271A-271A(1)
Authors: Hayes A.W.; Altounyan P.F.R.

Ground waste glass as a pozzolanic consolidation agent for mine backfill
pp. 271A-271A(1)
Authors: Archibald J.F.; DeGagne D.O.; Lausch P.; De Souza E.M.

Interaction of multiple helical earth anchors embedded in granular soil
pp. 271A-271A(1)
Authors: Shaheen W.A.; Demars K.R.

Assessment of utilisation of shotcrete linings from geotechnical deformation data
pp. 271A-271A(1)
Authors: Zachow R.; Vavrovsky G.-M.

The natural rock arch
pp. 271A-271A(1)
Authors: Bergmair M.; Huber G.

Calculation of width of yielding zone of coal pillar and analysis of influencing factors (in Chinese)
pp. 271A-272A(2)
Authors: Wu L.; Wang J.

Stability of roof rock beam structure and stiffness of supporting system (in Chinese)
pp. 272A-272A(1)
Author: Zhong X.

Ensuring the right support system
pp. 272A-272A(1)
Author: Hartley P.

Geomembrane landfill liners in the real world
pp. 272A-272A(1)
Authors: Mollard S.J.; Jefford C.E.; Staff M.G.; Brown G.R.J.

Laboratory investigations into designated high-attenuation landfill liners
pp. 272A-272A(1)
Authors: Bright M.I.; Thornton S.F.; Lerner D.N.; Tellam J.H.

Stability considerations in landfill lining design
pp. 272A-272A(1)
Authors: Dixon J.H.; Bentley S.P.

Stabilization of lateritic soils with phosphoric acid
pp. 272A-272A(1)
Authors: Medina J.; Guida H.N.

A comparative assessment of sand and lime stabilization of residual micaceous compressible soils for road construction
pp. 272A-272A(1)
Author: Frempong E.M.

Ettringite formation in lime-remediated mine tailings: I. Thermodynamic modeling
pp. 272A-272A(1)
Authors: Mohamed A.M.O.; Boily J.F.; Hossein M.; Hassani F.P.

The use of low-grade and unsound crushed rock aggregates in Ghana for construction
pp. 272A-273A(2)
Author: Kuma D.O.K.

Field compaction control studies on road bases in a new settlement area in Ghana
pp. 273A-273A(1)
Author: Frempong E.M.

Analysis of piled raft systems in layered soils
pp. 273A-273A(1)
Authors: Ta L.D.; Small J.C.

Behavior of a shallow plate anchor in clay under sustained loading
pp. 273A-273A(1)
Author: Das B.M.

Heart in his sleeve
pp. 273A-273A(1)
Author: Parker D.

Rates of decay
pp. 273A-273A(1)
Author: Gedge G.

Minesweeping
pp. 273A-273A(1)
Author: Russell H.

Tackling the Tagus
pp. 273A-274A(2)
Author: Byles R.

Settling up
pp. 274A-274A(1)
Author: Oliver A.

Roadford Reservoir: design, construction and performance
pp. 274A-274A(1)
Authors: Johnston T.A.; Wilson A.C.; Evans J.D.

Possible causes of the characteristics of seasonal changes in the settlement of the Krasnoyarsk dam
pp. 274A-274A(1)
Authors: Ulyashinskii V.A.; Chupin G.A.; Tetel'min V.V.; Fetisov S.P.

Evaluation of seismic hazard, local site effect, liquefaction potential, and dynamic performance of a world example of an embankment dam characterized by very complex and unique foundations conditions: Karameh dam in the Jordan Valley
pp. 274A-274A(1)
Author: Al-Homoud A.S.

Analytical model of progressive slope failure in waste containment systems
pp. 274A-274A(1)
Authors: Gilbert R.B.; Long J.H.; Moses B.E.

Hillside materials and slopes of the San Francisco Bay region, California
pp. 274A-275A(2)
Authors: Ellen S.D.; Wentworth C.M.

Stabilization of an urban refuse dump and its planning extension near Ancona, Marche, Italy
pp. 275A-275A(1)
Authors: Bromhead E.N.; Coppola L.; Rendell H.M.

Basic principles of designing hydraulic-fill ash storages located in the northern construction-climatic zone
pp. 275A-275A(1)
Authors: Korytova I.V.; Krivonogova N.F.

Geotechnical study of landslides resulting from a highway construction in Jordan
pp. 275A-275A(1)
Authors: Malkawi A.I.H.; Taqieddin S.A.

Engineering properties and slope stability of road cuttings along the Enugu-Onitsha express road, southeastern Nigeria
pp. 275A-275A(1)
Authors: Okagbue C.O.; Ifedigbo O.T.

High roads high risks
pp. 275A-275A(1)
Author: Owen L.

Three Gorges Dam reservoir, Yangtze River, China: preliminary notes on the stability of natural and artificial slopes
pp. 275A-275A(1)
Author: Fairhurst C.

Aspects of the differences in the erodibility of the waste rock dump and natural surfaces, Ranger Uranium Mine, Northern Territory, Australia
pp. 275A-276A(2)
Author: Riley S.J.

Study on stresses of concrete diaphragm walls and surrounding soil (in Chinese)
pp. 276A-276A(1)
Authors: Shen X.; Shuili X.

Coal carbonization in northeast England: investigating and cleaning-up an historical legacy
pp. 276A-276A(1)
Authors: Forth R.A.; Beaumont D.

Environmental impact assessment of the Pequenos Libombos Dam in southern Mozambique
pp. 276A-276A(1)
Author: Chonguica E.

Lessons from the Kobe quake
pp. 276A-276A(1)
Authors: Cooper J.D.; Buckle I.

Deterministic versus probabilistic seismic hazard analysis for critical structures
pp. 276A-276A(1)
Author: Krinitzsky E.L.

The N2 method for the seismic damage analysis of RC buildings
pp. 276A-276A(1)
Authors: Fajfar P.; Gaspersic P.

A modified Kirchhoff theory for boundary element analysis of thin plates resting on two-parameter foundation
pp. 276A-276A(1)
Authors: El-Zafrany A.; Fadhil S.

Behaviour of asymmetric building systems under a monotonic load - I
pp. 276A-277A(2)
Authors: Ferhi A.; Truman K.Z.

Behaviour of asymmetric building systems under a monotonic load - II
pp. 277A-277A(1)
Authors: Ferhi A.; Truman K.Z.

Application of boundary element analysis for multiple seismic cracking in concrete gravity dams
pp. 277A-277A(1)
Authors: Batta V.; Pekau O.A.

An investigation into the base sliding response of rigid concrete gravity dams to dynamic loading
pp. 277A-277A(1)
Authors: Mir R.A.; Taylor C.A.

Three-dimensional analysis of soil-steel bridges
pp. 277A-277A(1)
Authors: Girges Y.; Abdel-Sayed G.

Experimental study of FPS system in bridge seismic isolation
pp. 277A-277A(1)
Authors: Tsopelas P.; Constantinou M.C.; Kim Y.S.; Okamoto S.

Wave interaction with permeable coastal structures
pp. 277A-277A(1)
Author: Van Gent M.R.A.

Engineering geological characterization of low strength anisotropic rocks in the Himalayan region for assessment of tunnel support
pp. 277A-277A(1)
Authors: Bhasin R.; Barton N.; Grimstad E.; Chryssanthakis P.

Ring of confidence
pp. 277A-278A(2)
Author: Oliver A.

Analysis of casing failures of deep geothermal wells in Greece
pp. 278A-278A(1)
Authors: Chiotis E.; Vrellis G.

Engineering geologic factors in the design of a large underground structure in a tuff sequence in Cappadocia
pp. 278A-278A(1)
Author: Yilmazer I.

St Clair river tunnel: past and present
pp. 278A-278A(1)
Author: Finch A.

How to prevent tunnel ice-up?
pp. 278A-278A(1)
Authors: Elliot G.M.; Sandfort M.R.; May J.C.

Cleaning up the River Emscher
pp. 278A-278A(1)
Author: Smet W.

Probing ahead of the face with percussive drilling
pp. 278A-278A(1)
Author: Schunnesson H.

Erneuerung des Kraftwerks Amsteg (Tunnelling by TBM - headrace tunnel of Amsteg power station)
pp. 278A-278A(1)
Author: Kohler H.

French EPB machines conquer Shanghai soil
pp. 278A-278A(1)
Authors: Zhujun S.; Shaozu X.

Double shielded TBM drives Seoul cable tunnel
pp. 278A-279A(2)
Author: Page M.

Driving into the 21st century
pp. 279A-279A(1)
Author: Page M.

Future robotic mining at INCO Limited - the next 25 years
pp. 279A-279A(1)
Author: Baiden G.R.

Remote operation from surface of Tamrock DataSolo drills at INCO's Stobie mine
pp. 279A-279A(1)
Authors: Poole R.A.; Golde P.V.; Baiden G.R.

Advanced minewide automation in Potash
pp. 279A-279A(1)
Author: Fortney S.J.

Total extraction of seam under surface structures with coordinated strip mining method (in Chinese)
pp. 279A-279A(1)
Author: Huang L.

Mining technique of sub-level caving under wire mesh for fully mechanized face (in Chinese)
pp. 279A-279A(1)
Authors: Zhang K.; Liu X.; Jin T.; Zhang J.

Highwall coal recovery
pp. 279A-279A(1)
Author: Williams R.

Progress toward a mining strategy based on mineral leaching with secondary recovery
pp. 279A-279A(1)
Author: Forbes L.K.

Quarrying without conflict
pp. 279A-279A(1)
Author: Fryer T.

Characteristics of jointing in the Malmesbury Group, Harbour area, Cape Town
pp. 279A-280A(2)
Author: Stowe C.W.

Geological and other influences on the design of containment systems in hard rock quarries
pp. 280A-280A(1)
Author: Mann D.C.

Pre-design evaluation of disused quarries as landfill sites
pp. 280A-280A(1)
Authors: Lyle P.; Gibson P.J.; Woodside A.R.; Woodward W.D.H.

Waste disposal in steep-sided quarries: geomembrane-based barrier systems
pp. 280A-280A(1)
Author: Jones D.R.V.

The construction of clay liners for landfills
pp. 280A-280A(1)
Authors: Clark R.G.; Davies G.

Simulation of the wicking effect in a two-layer soil liner system
pp. 280A-280A(1)
Authors: T.-C. J.Y.; Guzman A.; Srivastava R.; Gagnard P.E.; Kramer J.H.

Settlement of Beddingham landfill
pp. 280A-280A(1)
Author: Di Stefano A.B.

Ground investigation and design for a landfill at Seater, Caithness
pp. 280A-280A(1)
Author: Croxford A.J.

Remedial containment measures for a peat bog landfill site
pp. 281A-281A(1)
Authors: McShane K.; Gregory B.J.

Storage of hazardous waste at shallow depths
pp. 281A-281A(1)
Authors: Christiansson R.; Jernlas R.

Research on long-lived radioactive waste management: focus on environmental issues
pp. 281A-281A(1)
Author: Jehan R.A.

The principles of burying radioactive waste: basic physical and thermomechanical properties of geological formations
pp. 281A-281A(1)
Author: Habib P.

Disposal of radioactive wastes in argillaceous formations
pp. 281A-281A(1)
Authors: Horseman S.T.; Volckaert G.

Geotechnical core and rock mass characterization for the UK radioactive waste repository design
pp. 281A-281A(1)
Author: Rawlings C.G.

Tracer tests in a full-scale deposition hole in the Teollisuuden Voima Oy research tunnel
pp. 281A-282A(2)
Author: Viitanen P.

Pilot bore excavation with TBM and an example of the design of a remote-controlled micro TBM for competement rock
pp. 282A-282A(1)
Authors: Grasso P.; Mahtab A.; Pelizza S.

How safe is the NATM?
pp. 282A-282A(1)
Author: Rokahr R.B.

A new safety concept in tunnel engineering
pp. 282A-282A(1)
Author: Lauffer H.

NATM and safety - a provocation?
pp. 282A-282A(1)
Author: Karpellus W.

The classical crown heading in the tension field between safety and efficiency
pp. 282A-282A(1)
Author: Jodl H.G.

Know-how-transfer for an innovative NATM-solution
pp. 282A-282A(1)
Authors: Arnold J.; Neumann C.

Bangkok's sewage is going to waste
pp. 282A-282A(1)
Author: Grogan T.

Putting Taipei's main rail tunnels underground
pp. 282A-282A(1)
Authors: Siranovic E.; Mak K.W.; Clifford R.

Overcoming difficult ground in Taipei
pp. 282A-283A(2)
Authors: Bretz H.; Schultz C.

The protection of groundwaters from the effects of waste disposal
pp. 283A-283A(1)
Authors: Hart P.A.; Davey I.

Investigation, hazard assessment and remediation of existing landfills
pp. 283A-283A(1)
Authors: Marsh A.H.; Garnham A.

Development of a lined landfill site adjacent to a major potable supply river
pp. 283A-283A(1)
Authors: Apted J.P.; Philpott M.; Gibbs S.W.

Engineering geological and legal aspects involving proposals for a large waste disposal facility The Netherlands
pp. 283A-283A(1)
Author: Maurenbrecher P.M.

Landfills and associated leachate in the greater Durban area: two case histories
pp. 283A-283A(1)
Authors: Bell F.G.; Sillito A.J.; Jermy C.A.

Towards an ecologically and economically reasonable management of mineral resources
pp. 283A-284A(2)
Authors: Binswanger H.C.; Siegenthaler C.P.

Pollution - the legacy of the Welsh metal mines
pp. 284A-284A(1)
Author: Bosley P.

Water movement in fissures in soil body disturbed by mining (in Chinese)
pp. 284A-284A(1)
Authors: Wang Y.; Wang Y.; Yin Z.; Sun X.

Methods for the control and treatment of acid mine drainage
pp. 284A-284A(1)
Authors: Robinson J.D.F.; Robb G.A.

Evaluation of phosphate pebble as a precipitant for acid mine drainage treatment
pp. 284A-284A(1)
Authors: Jung-Chan C.; West T.R.

Evaluation of a composite soil cover to control acid waste rock pile drainage
pp. 284A-284A(1)
Authors: Bell A.V.; Riley M.D.; Yanful E.K.

Submarine tailings disposal (STD) for mines: an introduction
pp. 284A-284A(1)
Authors: Ellis D.V.; Poling G.W.; Baer R.L.

Quartz Hill, Alaska: a case history of engineering and environmental requirements for STD in the USA
pp. 284A-284A(1)
Authors: Hesse C.A.; Ellis D.V.

Tailings disposal at a marine placer mining operation by WestGold, Alaska
pp. 284A-285A(2)
Authors: Garnett R.H.T.; Ellis D.V.

Review of 23 years of STD: Island Copper Mine, Canada
pp. 285A-285A(1)
Authors: Ellis D.V.; Pedersen T.F.; Poling G.W.; Pelletier C.; Horne I.

Effects of changing environmental rules: Kitsault molybdenum mine, Canada
pp. 285A-285A(1)
Authors: Pedersen T.F.; Ellis D.V.; Poling G.W.; Pelletier C.

Deep water STD at the Misima gold and silver mine, Papua, New Guinea
pp. 285A-285A(1)
Authors: Jones S.G.; Ellis D.V.

Issues in assessing the long-term stability of engineered landforms at Ranger Uranium Mine, Northern Territory, Australia
pp. 285A-285A(1)
Author: Riley S.J.

Mineralogic constraints on the bioavailability of arsenic in smelter-impacted soils
pp. 285A-285A(1)
Authors: Davis A.; Ruby M.V.; Bloom M.; Schoof R.; Freeman G.; Bergstrom P.D.

The effects of pulsed pumping on land subsidence in the Santa Clara Valley, California
pp. 285A-285A(1)
Authors: Wilson A.M.; Gorelick S.

Planned coal mine subsidence in Illinois - a public information booklet
pp. 286A-286A(1)
Authors: Bauer R.A.; Trent B.A.; Mehnert B.B.; Van Roosendaal D.J.

Seafloor mining subsidence in the Sydney coalfield
pp. 286A-286A(1)
Authors: Forrester D.J.; Courtney R.C.; Forgeron S.V.; Stewart J.M.; Hart S.T.

Method for prediction of surface movement in mining coal seam of arbitary pattern of distribution
pp. 286A-286A(1)
Authors: Li Y.; Wang J.; Xing A.

Mechanism and calculation of surface discontinuous deformation
pp. 286A-286A(1)
Author: Dai H.

Application of induced seismicity to radioactive waste management programmes
pp. 286A-286A(1)
Authors: Young R.P.; Bentley S.P.

Complete Stress-Strain Curves for Various Rock Types in Uniaxial Tension
pp. 549-556(8)
Authors: Isaksen G.H.; Okubo S.; Fukui K.

Deformation Behaviour of Soft Rocks during Consolidated-Undrained Cyclic Triaxial Testing
pp. 557-572(16)
Authors: Deaton B.C.; Balsam W.L.; Yoshinaka R.; Osada M.; Tran T.V.

Plane-strain Compression of Rock-like Materials
pp. 573-584(12)
Authors: Orem W.H.; Neuzil S.G.; Lerch H.E.; Cecil C.B.; Labuz J.F.; Dai S.-T.; Papamichos E.

An Acoustic Emission Study of Damage Development and Stress-Memory Effects in Sandstone
pp. 585-593(9)
Authors: Waseda A.; Kajiwara Y.; Nishita H.; Iwano H.; Pestman B.J.; Van Munster J.G.

Numerical Modelling of the Flexural Deformation of Foliated Rock Slopes
pp. 595-606(12)
Authors: Simoneit B.R.T.; Leif R.N.; Ishiwatari R.; Adhikary D.P.; Dyskin A.V.; Jewell R.J.

Comparison of Predicted and Measured Performance of a Large Cavern in the Himalayas
pp. 607-626(20)
Authors: Bhasin R.K.; Barton N.; Grimstad E.; Chryssanthakis P.; Shende F.P.

Joint Structures Determined by Clustering Microearthquakes Using Waveform Amplitude Ratios
pp. 627-639(13)
Authors: Diamant M.; Hansen M.B.; Rieneck K.; Svenson M.; Yasukawa K.; Bendtzen K.; Roff A.; Phillips W.S.; Brown D.W.

Back Analysis of Initial Rock Stresses and Time-Dependent Parameters
pp. 641-645(5)
Authors: Warwick P.D.; Crowley S.S.; Ruppert L.F.; Pontolillo J.; L. Y.; K. Z.; Y. W.

A Neural Network Model for Real-time Roof Pressure Prediction in Coal Mines
pp. 647-653(7)
Authors: Bence A.E.; Kvenvolden K.A.; Kennicutt M.C.; Xia-Ting F.; Yong-Jia W.; Jian-Guo Y.

The Induced Wedge Test for Field Measurement of Joint Friction
pp. 655-657(3)
Authors: Thapa B.B.; Goodman R.E.