International Journal of Rock Mechanics and Mining Sciences and Geomechanics Abstracts

Geotechnical engineering: emerging trends in design and practice
pp. 149A-149A(1)
Authors: Saxena K.R.; Balkema A.A.

Annual review of mining, 1994
pp. 149A-149A(1)
Author: Brewis T.

Annual review of metals and minerals, 1994
pp. 149A-149A(1)
Author: Brewis T.

Mineral resource evaluation II: methods and case histories
pp. 149A-149A(1)
Authors: Whateley M.K.G.; Harvey P.K.

An overview of the South African minerals industry
pp. 149A-149A(1)
Authors: Scott-Russell H.; Ball J.C.; Morris R.

Evaluating and controlling geological risk
pp. 150A-150A(1)
Author: Mackenzie B.W.

Cretaceous tectonics of the Andes
pp. 150A-150A(1)
Author: Salfity J.A.

M40 Oxford-Birmingham: geology and geotechnics of the Waterstock-Banbury section
pp. 150A-150A(1)
Author: Nicholls R.A.

Structural geology as a tool to reduce geological risks at the Mt Whaleback Mine, Western Australia
pp. 150A-150A(1)
Author: Ronaszeki J.

Environmental management systems in the mining industry
pp. 150A-150A(1)
Authors: Parker R.; Smith I.; Gowan M.

Quantifying and managing environmental financial risk from mining operations
pp. 150A-150A(1)
Author: Farrell T.P.

A look at environmental risks to mine projects with special reference to the role of governments
pp. 150A-150A(1)
Author: Bailey P.

Managing environmental risk - legal requirements
pp. 150A-150A(1)
Author: Astill M.J.

Environmental performance of large open pits in Western Australia - a perspective
pp. 151A-151A(1)
Authors: Jones H.; Lindbeck K.

Landform replication in quarrying
pp. 151A-151A(1)
Authors: Walton G.; Allington R.

Management of land endangered by slippage
pp. 151A-151A(1)
Author: Huska D.

Erosion factors
pp. 151A-151A(1)
Author: Antal J.

Analysis of erosion
pp. 151A-151A(1)
Authors: Dvorak J.; Prasak M.; Krovak F.

Erosion control to protect the soil
pp. 151A-151A(1)
Authors: Antal J.; Filip J.

Dilatancy in hydraulically isolated faults and the suppression of instability
pp. 151A-151A(1)
Authors: Lockner D.A.; Byerlee J.D.

Experimental study of the influence of pore pressure variation on sliding behavior of rock surfaces
pp. 151A-152A(2)
Authors: Li J.; Song R.; He C.; Wang S.; Zhang L.

Shear stress on a vertical strike-slip fault in a layered medium due to tectonic loading: San Andreas Fault system
pp. 152A-152A(1)
Author: Rybicki K.R.

Poroelastic stressing and induced seismicity near the Lacq gas field, southwestern France
pp. 152A-152A(1)
Authors: Segall P.; Grasso J.-R.; Mossop A.

A multidisciplinary approach to seismic hazard in southern California
pp. 152A-152A(1)
Author: Ward S.N.

Quasi-steady problems in freezing soils: IV. Traveling wave solutions
pp. 152A-152A(1)
Author: Nakano Y.

Aspects of theoretical fluid mechanics
pp. 152A-152A(1)
Author: Leray J.

Hydrology of the Great Plains aquifer system in Nebraska, Colorado, Kansas, and adjacent areas
pp. 152A-152A(1)
Authors: Helgesen J.O.; Leonard R.B.; Wolf R.J.

The design of groundwater control systems using the observational method
pp. 152A-152A(1)
Authors: Roberts T.O.L.; Preene M.

Identification of areas of recharge and discharge using Landsat-TM satellite imagery and aerial photography mapping techniques
pp. 153A-153A(1)
Authors: Salama R.B.; Tapley I.; Ishii T.; Hawkes G.

Three-dimensional steady groundwater flow and advective transport by integral transforms
pp. 153A-153A(1)
Authors: Illangasekare T.H.; Brannon J.H.; Amadei B.

Geohydrology and simulation of ground-water flow in the Northern Atlantic Coastal Plain aquifer system
pp. 153A-153A(1)
Authors: Leahy P.P.; Martin M.

Environmental factors and the development of Bath Spa, England
pp. 153A-153A(1)
Author: Kellaway G.A.

A simple design for hydraulic consolidometer and volume gauge
pp. 153A-153A(1)
Authors: Khan M.A.; Garga V.K.

Geotechnical properties of near-surface sediments from the northwestern Alboran Sea slope (SW Mediterranean): influence of texture and sedimentary processes
pp. 153A-153A(1)
Authors: Baraza J.; Ercilla G.

The bulking of sand: determining the relative density
pp. 153A-154A(2)
Author: Veldhuis A.

Observations on the use of the hoop test for measuring the tensile strength of anisotropic rock
pp. 154A-154A(1)
Authors: Butenuth C.; De Freitas M.H.; Park H.-D.; Schetelig K.; Van Lent P.; Grill P.

A field determination of rock strength
pp. 154A-154A(1)
Author: Smith H.J.

Fuzzy theory of rock strength and its application
pp. 154A-154A(1)
Author: Zhang Y.

Solution of the slump test using a finite deformation elastoplastic Drucker-Prager model
pp. 154A-154A(1)
Authors: Famiglietti C.M.; Prevost J.H.

An estimation of strength of mixed soils based on soil fabric
pp. 154A-154A(1)
Authors: Iryou T.; Ochiai H.; Omine K.; Hayashi S.

An evaluation of substepping and implicit stress point algorithms
pp. 154A-154A(1)
Authors: Potts D.M.; Ganendra D.

A finite element model for the analysis of wave induced stresses, displacements and pore pressures in an unsaturated seabed. II: model verification
pp. 154A-154A(1)
Author: Thomas S.D.

Experimental and theoretical investigation of deformation of water-saturated loess soils in the central Asian region
pp. 155A-155A(1)
Authors: Konovalov P.F.; Bezvoliev S.G.; Burkhanov A.; Dzhumaev K.M.

Unified 3D critical state bounding-surface plasticity model for soils incorporating continuous plastic loading under cyclic paths. Part I: constitutive relations
pp. 155A-155A(1)
Authors: Crouch R.S.; Wolf J.P.

Unified 3D critical state bounding-surface plasticity model for soils incorporating continuous plastic loading under cyclic paths. Part II: calibration and simulations
pp. 155A-155A(1)
Authors: Crouch R.S.; Wolf J.P.

Cyclic mobility behaviour of sand by the three-dimensional strain space multimechanism model
pp. 155A-155A(1)
Authors: Akiyoshi T.; Matsumoto H.; Fuchida K.; Fang H.L.

A simple hypoplastic constitutive model for sand
pp. 155A-155A(1)
Authors: Wei W.; Bauer E.

An experimental study of pipebursting in sand
pp. 155A-155A(1)
Authors: Rogers E.C.D.F.; Chapman D.N.

Tension tests on bored piles in cemented desert sands
pp. 155A-155A(1)
Authors: Ismael N.F.; Al-Sanad H.A.; Al-Otaibi F.

A study of deformation in the interface between soil and concrete
pp. 155A-156A(2)
Authors: Yin Z.-Z.; Zhu H.; Xu G.-H.

Effect of inhomogeneity on strength and deformation characteristics of concrete
pp. 156A-156A(1)
Authors: Balazs B.; Borjan J.; Horvath A.; Schwerteczky F.

Effect of loading rate on the strength of concrete subjected to uniaxial tension
pp. 156A-156A(1)
Authors: Rossi P.; Van Mier J.G.M.; Toutlemonde F.; Le Maou F.; Boulay C.

Investigation of the possibility of estimating concrete strength by porosity measurements
pp. 156A-156A(1)
Author: Kolias S.

On the hardness determination of fine grained concrete
pp. 156A-156A(1)
Authors: Kholmyansky M.; Kogan E.; Kovler K.

The use of the cracked Brazilian disc geometry for rock fracture investigations
pp. 156A-156A(1)
Authors: Fowell R.J.; Xu C.

Propagation of fractures from an interface in a Brazilian test specimen
pp. 156A-156A(1)
Authors: Malan D.F.; Napier J.A.L.; Watson B.P.

The progressive fracture of Lac du Bonnet granite
pp. 156A-156A(1)
Authors: Martin C.D.; Chandler N.A.

An improved model of fracture propagation by gas during rock blasting - some analytical results
pp. 156A-156A(1)
Authors: Paine A.S.; Please C.P.

Analysis of nonlinear wave propagation and shock wave formation in quasi-brittle material
pp. 157A-157A(1)
Authors: Saka M.; Ohba S.; Aizawa N.; Abe H.

Probabilistic aspects of fracture energy of concrete
pp. 157A-157A(1)
Authors: Wittmann F.H.; Slowik V.; Alvaredo A.M.

Calculation of the long-term strength of cohesive soils
pp. 157A-157A(1)
Authors: Geniev G.A.; Funtov E.B.

Strain localization analysis by elasto-viscoplastic softening model for frozen sand
pp. 157A-157A(1)
Authors: Oka F.; Adachi T.; Yashima a.; Chu L.L.

Investigation of the basic creep of concrete by acoustic emission
pp. 157A-157A(1)
Authors: Rossi P.; Godart N.; Robert J.L.; Gervais J.P.; Bruhat D.

Testing system for determining the mechanical behaviour of early age concrete under restrained and free uniaxial shrinkage
pp. 157A-157A(1)
Author: Kovler K.

Fluid flow and heat flow in deformable fractured porous media
pp. 157A-157A(1)
Authors: Bai M.; Roegiers J.-C.

Characteristics of gases produced in process of coal oxidation and their relations with selection of gas markers for prediction of spontaneous combustion
pp. 157A-158A(2)
Authors: He P.; Wang F.; Tang X.

Physics of ice sublimation from peaty soils and the attendant heat and mass transfer
pp. 158A-158A(1)
Authors: Gamayunov N.I.; Scotland D.M.; Shekhab K.Y.

A laboratory examination of organic matter degradation in a B horizon soil from post-mining reconstructed prime farmland soil
pp. 158A-158A(1)
Authors: Felton G.K.; Taraba J.L.

Barrier performance of concrete: a review of fluid transport theory
pp. 158A-158A(1)
Author: Hall C.

A mathematical model for flow and solute transport in non-homogeneous rock fractures
pp. 158A-158A(1)
Authors: Amadei B.; Illangasekare T.

Predicting the hydrodynamic permeability of sandstone with a pore-scale model
pp. 158A-158A(1)
Authors: Du Plessis J.P.; Roos L.I.

Determination of the porosity distribution in coal briquettes by measurements of the gas filtration parameters in an outburst pipe
pp. 158A-159A(2)
Authors: Bodziony J.; Krawczyk J.; Topolnicki J.

Critical concepts for column testing
pp. 159A-159A(1)
Author: Shackelford C.D.

Equations for the soil-water characteristic curve
pp. 159A-159A(1)
Authors: Fredlund D.G.; Xing A.

Predicting the permeability function for unsaturated soils using the soil-water characteristic curve
pp. 159A-159A(1)
Authors: Fredlund D.G.; Xing A.; Huang S.

Computed tomography as a tool for non-destructive analysis of flow patterns in macroporous clay soils
pp. 159A-159A(1)
Authors: Heijs A.W.J.; De Lange J.; Schoute J.F.T.; Bouma J.

Three-dimensional analysis of infiltration from the disc infiltrometer 1. A capillary-based theory
pp. 159A-159A(1)
Authors: Smettem K.R.J.; Parlange J.Y.; Ross P.J.; Haverkamp R.

Three-dimensional analysis of infiltration from the disc infiltrometer 2. Physically based infiltration equation
pp. 159A-159A(1)
Authors: Haverkamp R.; Ross P.J.; Smettem K.R.J.; Parlange J.Y.

Wave-induced soil response in an unsaturated anisotropic seabed of finite thickness
pp. 159A-160A(2)
Authors: Hsu J.R.C.; Jeng D.S.

The hydraulic permeability of bentonite suspensions with granular inclusions
pp. 160A-160A(1)
Authors: Meeten G.H.; Sherwood J.D.

Centrifuge techniques for testing clay liner samples
pp. 160A-160A(1)
Author: Mitchell R.J.

Effective porosity of unconsolidated sand: estimation and impact on capture zone geometry
pp. 160A-160A(1)
Author: Hudak P.F.

The use of standard deviation and skewness for estimating apparent permeability in a two-dimensional, heterogeneous medium
pp. 160A-160A(1)
Authors: Niibori Y.; Chida T.

An experimental investigation of dispersion in layered porous media
pp. 160A-160A(1)
Authors: Sternberg S.P.K.; Greenkorn R.A.

Efficiency of the use of set-retarding superplasticizers in hot climates
pp. 160A-160A(1)
Author: Alshamsi A.M.

A rapid and reliable on-site method of assessing desiccation in clay soils
pp. 160A-161A(2)
Authors: Pugh R.S.; Parnell P.G.; Parkes R.D.

Experimental study on swelling characteristics of compacted bentonite
pp. 161A-161A(1)
Authors: Komine H.; Ogata N.

Computational modelling of isothermal consolidation of fractured porous media
pp. 161A-161A(1)
Authors: Selvadurai A.P.S.; Nguyen T.S.

Behaviour of flexible piles in layered sands under eccentric and inclined loads
pp. 161A-161A(1)
Authors: Sastry V.V.R.N.; Meyerhof G.G.

A discrete wavenumber and normal-mode superposition method for synthetic seismograms
pp. 161A-161A(1)
Author: Touhei T.

Dynamic behaviour of concretes: from the material to the structure
pp. 161A-161A(1)
Author: Rossi P.

Presentation d'un banc d'essai dynamique de materiaux et de structures: exemple d'application a l'etude de structures en mortier (A dynamic test unit for materials and structures: example of an application to structures made of mortar)
pp. 161A-161A(1)
Author: Bailly P.

Classification and strength of Northumberland till
pp. 161A-162A(2)
Authors: Robertson T.L.; Armstrong W.; Clarke B.G.; Hughes D.B.

Geotechnical characterization of blended coal tailings for construction and rehabilitation work
pp. 162A-162A(1)
Author: Indraratna B.

Numerical simulation of roadway maintenance by stress control method (in Chinese)
pp. 162A-162A(1)
Author: Ju W.

Monitoring stress changes in three dimensions using a solid cylindrical cell
pp. 162A-162A(1)
Authors: Bois A.-P.; Ballivy G.; Saleh K.

Stresses around a circular opening in an elastoplastic porous medium subjected to repeated hydraulic loading
pp. 162A-162A(1)
Authors: Wang Y.; Dusseault M.B.

Back analysis of stress measurement of anisotropic rock mass (in Chinese)
pp. 162A-162A(1)
Authors: Cao W.; Yan R.

Back analysis of initial stresses in rock masses (in Chinese)
pp. 162A-162A(1)
Author: Zhu B.

Confidence intervals for in situ stress measurements
pp. 162A-162A(1)
Author: Jupe A.J.

Mineral exploration
pp. 163A-163A(1)
Authors: Moon C.J.; Khan M.A.

Canadian diamond discoveries - new game, new rules
pp. 163A-163A(1)
Author: Hurburgh D.M.

Airborne remote sensing for geology and the environment - present and future
pp. 163A-163A(1)
Authors: Watson K.; Knepper D.H.

Environment-sensitive: DGPS and barometry for seismic surveys
pp. 163A-163A(1)
Authors: McLintock D.; Deren G.; Krakiwsky E.J.

Driving force
pp. 163A-163A(1)
Author: Russell H.

Basic principles and methods for survey of karst pillars (in Chinese)
pp. 163A-163A(1)
Authors: Guo D.; Sheng Y.; Jin X.; Huang T.

Knowledge-based interpretation of Landsat TM scenes detects abandoned landfills
pp. 163A-163A(1)
Author: Loguercio Polosa R.

Computerized construction of geological cross sections from digital maps
pp. 163A-164A(2)
Authors: Ichoku C.; Chorowicz J.; Parrot J.-F.

Comparison of three calibration techniques for utilization of GER 63-channel aircraft scanner data of Makhtesh Ramon, Negev, Israel
pp. 164A-164A(1)
Authors: Ben-Dor E.; Kruse F.A.; Lefkoff A.B.; Banin A.

Practical modifications to improve the sledgehammer seismic source
pp. 164A-164A(1)
Authors: Keiswetter D.; Steeples D.

Inversion of reflection seismograms by differential semblance analysis: algorithm structure and synthetic examples
pp. 164A-164A(1)
Authors: Symes W.W.; Kern M.

Shallow subsurface mapping by electromagnetic sounding in the 300 kHz to 30 MHz range: model studies and prototype system assessment
pp. 164A-164A(1)
Authors: Stewart D.C.; Anderson W.L.; Grover T.P.; Labson V.F.

Rejection of the singular point effect in downward continuation of geophysical potential fields
pp. 164A-164A(1)
Authors: Lesniak A.; Marcak H.

Gravity attraction due to buildings for the calculation of gravity urban correlation
pp. 164A-165A(2)
Author: Wojcicki A.

On a nonlinear autoregressive method applied to geophysical signals
pp. 165A-165A(1)
Authors: Bracalari M.; Salusti E.

Comprehensive research of physical parameters in coalfield and well logging
pp. 165A-165A(1)
Authors: Xi D.; Chen L.; Xie D.; Lei Q.

Exploration and development history of the Batman Gold Deposit, Mt Todd Project, Northern Territory
pp. 165A-165A(1)
Author: Poxon R.F.

Computational fluid dynamics improves liner cementing operation
pp. 165A-165A(1)
Authors: Barton N.A.; Archer G.L.; Seymour D.A.

Porosity, permeability, shear strength: crosswell tomography below an iron foundry
pp. 165A-165A(1)
Authors: Yamamoto T.; Nye T.; Kuru M.

Development of the specification for ground investigation
pp. 165A-165A(1)
Authors: Greenwood J.R.; Cobbe M.I.; Skinner R.W.

Use of Monte Carlo simulations in the evaluation of a large copper-gold deposit
pp. 165A-165A(1)
Author: Stewart D.

Diver-operated piston corer for nearshore use
pp. 165A-166A(2)
Authors: Sansone F.J.; Hollibaugh J.T.; Vink S.M.; Chambers R.M.; Joye S.B.; Popp B.N.

Device for sampling frozen soil
pp. 166A-166A(1)
Author: Rusetskas Y.Y.

Screen test
pp. 166A-166A(1)
Author: Wheeler P.

Computer-aided laboratory teaching in geotechnics
pp. 166A-166A(1)
Author: Davey-Wilson I.E.G.

Symposium on parallel finite element computations
pp. 166A-166A(1)
Author: Tezduyar T.E.

A framework for interactive computational analysis in geomechanics
pp. 166A-166A(1)
Authors: Miller G.R.; Banerjee S.; Sribalaskandarajah K.

Modeling deformation of rock masses under compression
pp. 166A-166A(1)
Authors: Zertsalov M.G.; Sakaniya B.E.

Subregion boundary element method
pp. 166A-167A(2)
Authors: Kita E.; Kamiya N.

MONICA - a computer algorithm for solving boundary value problems using the double-hardening constitutive law Monot: I. Algorithm development
pp. 167A-167A(1)
Author: Hicks M.A.

MONICA - a computer algorithm for solving boundary value problems using the double-hardening constitutive law Monot: II. Algorithm validation
pp. 167A-167A(1)
Author: Hicks M.A.

Boundary element analysis of thick reissner plates on two-parameters foundation
pp. 167A-167A(1)
Authors: Fadhil S.; El-Zafrany A.

An elastic analysis of load distribution for raft-pile systems
pp. 167A-167A(1)
Authors: Zhuang G.M.; Lee I.K.

Three-dimensional problems in geomechanics
pp. 167A-167A(1)
Author: Smith I.M.

Computer graphics and virtual reality in the mining industry
pp. 167A-167A(1)
Authors: Schofield D.; Denby B.; McClarnon D.

Use of genetic algorithms in a mining problem
pp. 167A-167A(1)
Authors: Clement S.; Vagenas N.

Study of fuzzy reliability theory of mine series system
pp. 167A-168A(2)
Authors: Ma Y.; Sun B.

Risk analysis and uncertainty in open pit mine design
pp. 168A-168A(1)
Author: Read J.R.L.

Risk assessment in reserve estimation and open-pit planning
pp. 168A-168A(1)
Author: Dowd P.A.

Converting an optimum pit based on block modelling into a practical pit based on spring modelling
pp. 168A-168A(1)
Author: Collins J.-L.

Using geostatistics to assist in optimising grade control estimation of KCGM's Fimiston open pit
pp. 168A-168A(1)
Authors: Snowden V.; Moore C.; Kelly D.

Childe Harold: a case study in the use of multiple bench grade control techniques
pp. 168A-168A(1)
Authors: Hunt S.J.; Stuart M.S.; Allen P.B.

Grade control strategies and reconciliation procedures at Kidston Gold Mine, North Queensland
pp. 168A-168A(1)
Author: Collett D.L.

Control of product variability in a large open pit iron mine
pp. 168A-168A(1)
Authors: Sanguinetti H.; Shrivastava P.; Deraisme J.; Guibal D.; Humphreys M.

Automated downtime recording and processing for continuous surface mining systems
pp. 168A-168A(1)
Author: Agioutantis Z.G.

MIXFIT: a microcomputer-based routine for fitting heterogeneous probability distribution functions to data
pp. 168A-168A(1)
Authors: Cooke R.A.; Mostaghimi S.

Determining the maximum present value of an open pit mining operation
pp. 168A-169A(2)
Author: Crone J.G.D.

Individual personal liability risk management in open pit mining
pp. 169A-169A(1)
Authors: Williamson-Noble J.C.; Lawrence M.J.

Strategic development of the stage 5 pit at Kidston
pp. 169A-169A(1)
Author: McLean P.

Reducing risks at Syncrude Canada Ltd's mining operations through the application of technology
pp. 169A-169A(1)
Authors: Coward J.; Fair A.; Oxenford J.

Design risk management at Mt Leyshon Gold Mine
pp. 169A-169A(1)
Author: Moddejongen M.

Remnant mining at Liddell Open Cut
pp. 169A-169A(1)
Author: Pankhurst I.A.

Application of Whittle Four-D to risk management in pit optimisation
pp. 169A-169A(1)
Author: Tulp T.

Assessment of technical and financial risk through feasibility studies
pp. 169A-169A(1)
Authors: West R.F.; Aspinall T.O.

Mechanical model of coal cutting
pp. 169A-169A(1)
Author: Niu D.

Head start
pp. 169A-170A(2)
Author: Byles R.

Acrylamide copolymers: a review of methods for the determination of concentration and degree of hydrolysis
pp. 170A-170A(1)
Authors: Taylor K.C.; Nasr-El-Din H.A.

Total quality blasting
pp. 170A-170A(1)
Authors: Moxon N.; Burchell S.; McGregor K.

Practical technique for determining the size distribution of blasted benches, waste dumps and heap leach sites
pp. 170A-170A(1)
Author: Kemeny J.M.

Mid-column air decks boost production blasting
pp. 170A-170A(1)
Authors: Davids T.; Botha B.J.J.

Blast vibration control and assessment techniques
pp. 170A-170A(1)
Authors: Richards A.B.; Evans R.; Moore A.J.

Measurement and analysis of near-field blast vibration and damage
pp. 170A-170A(1)
Authors: Yang R.L.; Rocque P.; Katsabanis P.; Bawden W.F.

Une 'demo' percutante dans le basalte (Percussive demonstration in basalt)
pp. 171A-171A(1)
Author: Mounier J.

Variable speed SAG mills: motor capability vs. mill capability
pp. 171A-171A(1)
Author: Barratt D.J.

Mechanical mining: challenges and directions
pp. 171A-171A(1)
Author: Gertsch R.E.

Underground hard rock mechanical mining
pp. 171A-171A(1)
Author: Bullock R.L.

Performance prediction: a key issue in mechanical hard rock mining
pp. 171A-171A(1)
Authors: Rostami J.; Ozdemir L.; Neil D.M.

Continous surface mining equipment: how to achieve success
pp. 171A-171A(1)
Author: DeLilla E.

Rock splitting as a primary excavation technique
pp. 171A-172A(2)
Authors: Paraszczak J.; Hadjigeorgiou J.

Performance of dragline hoist and drag ropes
pp. 172A-172A(1)
Author: Golosinski T.S.

Conducting mobile equipment maintenance
pp. 172A-172A(1)
Author: Tomlingson P.D.

Ensure your fleet is always operating at its top efficiency using advanced monitoring and benchmarking technology
pp. 172A-172A(1)
Authors: Zhang S.; Kinnane T.; Rogers R.

Reducing operating risk by training
pp. 172A-172A(1)
Authors: Waghorne E.; Hanley J.

Tribology: today's technology for mine maintenance
pp. 172A-172A(1)
Author: Kincaid R.L.

Design of a spoked-wheel dynamometer for simultaneous monitoring of thrust and torque developed at the bit-rock interface during drilling
pp. 172A-172A(1)
Authors: Rao K.U.M.; Misra B.

Reducing the risk factor
pp. 172A-172A(1)
Author: Greywell C.

Optimizing wood crib design: improving ground control and reducing support cost
pp. 172A-173A(2)
Authors: Barczak T.M.; Gearhart D.F.

Reasonable thickness of monolithic support for shaft and roadways (
pp. 173A-173A(1)
Authors: Zheng Y.; Zhu F.; Wu X.

Theory for calculation of yieldable steel arch
pp. 173A-173A(1)
Authors: Jiang B.; Chen Z.

Impact testing for rockbolt design in rockburst conditions
pp. 173A-173A(1)
Authors: Yi X.; Kaiser P.K.

Application of truss bolting technique in mining roadways
pp. 173A-173A(1)
Authors: Bao H.; Zhang J.; Kang H.

Theoretical analysis of rock-bolting and shotcreting using bolts with bottom plate and steel reinforced strip
pp. 173A-173A(1)
Authors: Gao Q.; Ren T.

Active role
pp. 173A-173A(1)
Author: Russell H.

Vertical uplift capacity of horizontal anchors
pp. 173A-173A(1)
Authors: Rao K.S.S.; Kumar J.

The development of NATM in the stress field between practice and theory
pp. 173A-173A(1)
Author: Lauffer H.

Designing mine pillars with the convergence-confinement method
pp. 174A-174A(1)
Authors: Gill D.E.; Leite M.H.; Labrie D.

Scaling mine pillar size and shape with the Psi function
pp. 174A-174A(1)
Author: Panek L.A.

Compensation grouting
pp. 174A-174A(1)
Authors: Mair R.J.; Rankin W.J.; Essler R.D.; Chipp P.N.

Observations of ground and structure movements for compensation grouting during tunnel construction at Waterloo station
pp. 174A-174A(1)
Authors: Harris D.I.; Mair R.J.; Love J.P.; Taylor R.N.; Henderson T.O.

On the enhanced confining pressure approach to the mechanics of reinforced soil
pp. 174A-174A(1)
Author: Athanasopoulos G.A.

Settlement response of a reinforced shallow earth bed
pp. 174A-174A(1)
Authors: Ghosh C.; Madhav M.R.

The effects of foundation width on model tests for the bearing capacity of sand with geogrid reinforcement
pp. 174A-175A(2)
Authors: Das B.M.; Omar M.T.

Strip foundation on geogrid-reinforced clay: behavior under cyclic loading
pp. 175A-175A(1)
Authors: Das B.M.; Shin E.C.

Field observations on the load-strain-time behaviour of geogrid reinforcement
pp. 175A-175A(1)
Author: Fannin R.J.

Prize protection
pp. 175A-175A(1)
Author: Wheeler P.

An experimental study of the performance of geosynthetic band drains
pp. 175A-175A(1)
Authors: Wasti Y.; Hergul T.

Method of calculating pile fields and other vertically reinforced soil masses
pp. 175A-176A(2)
Authors: Fedorovskii V.G.; Bezvolev S.G.

Strengthening of soils during construction under chalk karst conditions
pp. 176A-176A(1)
Author: Zhivoderov V.N.

Application of the observational method to hydraulic fill reclamation projects
pp. 176A-176A(1)
Author: Choa V.

Surface mining
pp. 176A-176A(1)
Authors: Dunn A.R.; Hoddinott P.J.

BOSS '94. Proceedings of the seventh international conference on the behaviour of offshore structures, Massachusetts Institute of Technology, July 1994
pp. 176A-176A(1)
Author: Chryssostomidis C.

Construction of the games arenas for the 1994 Winter Olympics in Norway
pp. 176A-176A(1)
Author: Valstad T.

Observational design method for earth structures constructed on soft ground
pp. 176A-177A(2)
Authors: Wakita E.; Matsuo M.

Effect of orientation of approach slabs on pavement deformation
pp. 177A-177A(1)
Authors: Wong H.K.W.; Small J.C.

Incorporating elasto-plasticity in granular layer pavement design
pp. 177A-177A(1)
Authors: Wolff H.; Visser A.T.

Effect of material properties on compactability and bearing capacity
pp. 177A-177A(1)
Authors: Semmelink C.J.; Visser A.T.

The structural wear of road pavements: an assessment of the fourth power law on the Al(M) motorway in County Durham
pp. 177A-177A(1)
Authors: Rhodes A.H.; Suara A.M.

The way forward
pp. 177A-177A(1)
Author: Loveday C.

Antiquated standards are impeding the use of recycled building materials in road building
pp. 177A-177A(1)
Author: Hirt R.

Large deformation analysis of plates on unilateral elastic foundation
pp. 177A-177A(1)
Author: Khathlan A.A.

Structural capacity of precast piles with grouted base
pp. 178A-178A(1)
Authors: Kusakabe O.; Kakurai M.; Ueno K.; Kurachi Y.

Contact problem with controlling parameters for a rigid plate on an elastic layer of variable thickness
pp. 178A-178A(1)
Authors: Aleinikov S.M.; Ikonin S.V.

Limits of applicability of linear calculation of foundation settlements and ultimate bearing pressures
pp. 178A-178A(1)
Author: Dovnarovich S.V.

Calculation of marine foundations subjected to repeated loads by means of the homogenization method
pp. 178A-178A(1)
Authors: Shahrour I.; Meimon Y.

Profit share
pp. 178A-178A(1)
Author: Byles R.

Tight places
pp. 178A-178A(1)
Author: Winney M.

Match point
pp. 178A-178A(1)
Author: Russell L.

Underpinning the Round Tower at Windsor Castle
pp. 178A-178A(1)
Author: Candler C.J.

Measurements for monitoring the foundations of Schwerin Castle
pp. 178A-178A(1)
Authors: Otto H.P.; Thiele R.

Prime piling
pp. 178A-179A(2)
Author: Russell H.

Construction of Maentwrog new dam
pp. 179A-179A(1)
Authors: Tripp J.F.; Davie J.; Sheffield M.P.

Design considerations for the use of wedge-shaped precast concrete blocks for dam spillways
pp. 179A-179A(1)
Authors: Baker R.; Pravdivets Y.; Hewlett H.

Estuarine barrages and their influence on groundwater
pp. 179A-179A(1)
Author: Lloyd J.W.

Performance of Foyle Bridge east abutment
pp. 179A-179A(1)
Authors: Nicholson D.P.; Low A.

The performance of treated mining pond slime
pp. 179A-179A(1)
Authors: Ting W.H.; Nithiaraj R.; Ng S.J.

Risk assessment of coastal defences
pp. 179A-179A(1)
Author: Townend E.I.H.

Specification and measurement of rock for coastal structures and breakwaters
pp. 179A-179A(1)
Authors: Simm J.D.; Latham J.P.

Vertical face breakwaters and seawalls
pp. 179A-180A(2)
Author: Oumeraci H.

Probabilistic design of rubble mound breakwaters: the way ahead
pp. 180A-180A(1)
Author: Mettam J.D.

Numerical modelling of wave-structure interaction
pp. 180A-180A(1)
Author: Van der Meer J.W.

Wave overtopping of seawalls, breakwaters and shoreline structures
pp. 180A-180A(1)
Author: Allsop N.W.H.

An application of an analytical model to a slope subject to rockfalls
pp. 180A-180A(1)
Authors: Chen H.; Chen R.-h.; Huang T.-H.

Newtonian fluid mechanics treatment of debris flows and avalanches
pp. 180A-180A(1)
Author: Hunt B.

Simplified pile-slope stability analysis
pp. 180A-180A(1)
Authors: Lee C.Y.; Hull T.S.; Poulos H.G.

Assessing the stability of inner shelf dredge spoil mounds using spreadsheet applications on personal computers
pp. 180A-180A(1)
Authors: De Lange W.; Healy T.

Monitoring of an open cut mine with a surveying robot
pp. 180A-180A(1)
Authors: Rueger J.M.; Alanko G.; Snow T.J.

Les sablieres et l'environnement au sud de l'agglomeration mancelle (Sand-quarries and the environment in southern suburban Le Mans)
pp. 181A-181A(1)
Authors: Goubin G.; Larue J.-P.; Weil J.-B.

Geotechnical assessment of the west wall of KCGM's Super Pit
pp. 181A-181A(1)
Author: Loubser P.

Managing the risk of failure in the Pit 1A highwall at Telfer Gold Mine, Telfer WA
pp. 181A-181A(1)
Author: Danckert G.M.

A probabilistic approach to the design optimisation of overburden slopes at Morwell Open Cut
pp. 181A-181A(1)
Authors: Zou J.Z.; Somerville J.L.; Rieniets S.

Argyle Diamond Mine open pit
pp. 181A-181A(1)
Authors: Deakin A.S.; Knight P.; Platell R.; Wall J.

The management of unstable slopes, east open pit, Daye, China
pp. 181A-181A(1)
Authors: Zai-Nan S.; Guo-Zheng J.

Red Dome stage III cutback - a case study in brinkmanship
pp. 181A-181A(1)
Authors: Christie M.A.; Paine G.G.

Multiple choice
pp. 181A-181A(1)
Author: Hayward D.

Application of the observational method to a deep basement excavated using the top-down method
pp. 182A-182A(1)
Authors: Ikuta Y.; Maruoka M.; Aoki M.; Sato E.

The observational approach to design of a sheet-piled retaining wall
pp. 182A-182A(1)
Authors: Young D.K.; Ho E.W.L.

The planning, design and construction parameters of Hong Kong's new airport
pp. 182A-182A(1)
Author: Oakervee D.E.

Gully erosion minimization on reclaimed surface mines using SSAST computer model
pp. 182A-182A(1)
Authors: McKenney R.A.; Gardner T.W.

Close-out - the risk of too much water
pp. 182A-182A(1)
Author: McQuade C.V.

Treatment of metal industrial wastewater by fly ash and cement fixation
pp. 182A-182A(1)
Authors: Weng C.H.; Huang C.P.

Statistical analyses of compacted clay landfill liners. Part 1: model development
pp. 182A-182A(1)
Authors: Donald S.D.; McBean E.A.

The management of sewage sludge by the water industry in England and Wales
pp. 183A-183A(1)
Author: Crichton R.A.

Performance parameters for pseudodynamic tests
pp. 183A-183A(1)
Authors: Thewalt C.; Roman M.

Generation of hazard-consistent fragility curves
pp. 183A-183A(1)
Authors: Hwang H.H.M.; Jun-Rong H.

Dynamic response of 2D and 3D block foundations on a halfspace with inclusions
pp. 183A-183A(1)
Authors: Antes H.; Estorff O.V.

Dynamic modelling and design of earthquake-resistant walls
pp. 183A-183A(1)
Authors: Linde P.; Bachmann H.

An experimental study on the use of dynamic tests for surveillance of concrete structures
pp. 183A-183A(1)
Author: Casas J.R.

Response of pile group embedded in a layered soil-superstructure interaction system to arbitrary incident seismic waves (in Chinese)
pp. 183A-183A(1)
Authors: Chen Q.; Xu Z.

Estimation methods of equivalent modal damping ratio of tall buildings with soil - structure interaction (in Chinese)
pp. 183A-184A(2)
Author: Shang S.

Hybrid structural control using viscoelastic dampers and active control systems
pp. 184A-184A(1)
Authors: Shyh-Rong T.; Pantelides C.P.

Probabilistic analysis of the residual displacement of soil hysteretic SDOF structure interaction system (in Chinese)
pp. 184A-184A(1)
Authors: Tan Z.; Yu Z.; Cao G.

An equivalent linear finite element approach for the estimation of pile foundation stiffnesses
pp. 184A-184A(1)
Authors: Maragakis E.A.; Douglas B.M.; Abdel-Ghaffar S.M.

Dynamic characteristics of shear buildings on laminated rubber bearings
pp. 184A-184A(1)
Authors: Tso-Chien P.; Wei C.

Subgrade model for transient response analysis of multiple embedded bodies
pp. 184A-184A(1)
Authors: Konagai K.; Nogami T.

Analysis of free vibrations of tall buildings
pp. 184A-184A(1)
Authors: Qiusheng L.; Hong C.; Guiqing L.

Seismic loading for buildings with setbacks
pp. 184A-185A(2)
Authors: C. M. W.; W. K. T.

Earthquake ground motion characterization for large or multiply supported structures
pp. 185A-185A(1)
Author: Banerji P.

Specifying aseismic design inputs for critical structures
pp. 185A-185A(1)
Author: Sharma R.D.

Damage to buildings in Latur Earthquake
pp. 185A-185A(1)
Authors: Sinha R.; Goyal A.

Simplified dynamic analysis for gravity dams
pp. 185A-185A(1)
Authors: Ghobarah A.; El-Nady A.; Aziz T.

Seismic retrofitting techniques for bridges - a state-of-the-art report
pp. 185A-185A(1)
Authors: Mitchell D.; Sexsmith R.; Tinawi R.

Observations on non-linear dynamic characteristics of suspension bridges
pp. 185A-185A(1)
Author: Brownjohn J.M.W.

Application of an empirical extreme value distribution to load models
pp. 185A-185A(1)
Author: Kanda J.

Dynamic pavement-strain histories from moving traffic load
pp. 185A-185A(1)
Authors: Zafir Z.; Siddharthan R.; Sebaaly P.E.

Impact of weight falling onto the ground
pp. 186A-186A(1)
Authors: Roesset J.M.; Kausel E.; Cuellar V.; Monte J.L.; Valerio J.

Underground mining
pp. 186A-186A(1)
Author: Russell F.M.

Moving underground in The Netherlands
pp. 186A-186A(1)
Authors: Barends F.B.J.; Van der Schrier J.

Depositional model of roof stability in fully mechanized coal faces in Pingdingshan Mine area
pp. 186A-186A(1)
Author: Ge D.

Fracturing characteristics of main roof strata when mining uphill and downhill and its effect on stability of immediate roof
pp. 186A-186A(1)
Authors: Tiang Q.; Liu J.; Zhang Y.

Stresses and stability analysis of rocks surrounding a tunnel in cyclorama arch section in deep mines
pp. 186A-186A(1)
Authors: Tang C.; Shen Q.

One-dimensional, semi-analytical solution for time-dependent behaviour of a seam
pp. 186A-186A(1)
Author: Nawrocki P.A.

Analytic solution for thin wall support applied in a circular tunnel by taking into consideration viscoelasticity of rockmass and support
pp. 187A-187A(1)
Author: Wang Z.

Evolution of strata pressures, cavity deformation and dimensioning of support systems
pp. 187A-187A(1)
Author: Vavrovsky G.M.

Predicted and measured performance of the 62 m span Norwegian Olympic Ice Hockey Cavern at Gjovik
pp. 187A-187A(1)
Author: Barton N.

Study of deformation model of a controlling holding-plate when large area is extracted continuously
pp. 187A-187A(1)
Authors: Wu L.; Wang J.

Rock load and tunnelling - Rabcewicz' view of 1944
pp. 187A-187A(1)
Author: Schubert W.

State-of-the-art geotechnical measurements in tunnelling
pp. 187A-187A(1)
Authors: Purrer W.; John M.

Discussion on stability analyses for underground openings (tunnels)
pp. 187A-187A(1)
Author: Pottler R.

A theoretical study of reinforcement influence on the stability of a tunnel face
pp. 188A-188A(1)
Author: Peila D.

Diagnosis of tunnel roof stability with a robotic sensor test bed
pp. 188A-188A(1)
Authors: Danko G.; Zhan G.; Mezei C.; Daemen J.J.K.; Mousset-Jones P.

Laboratory modelling of ground movements caused by pipejacking
pp. 188A-188A(1)
Authors: Rogers C.D.F.; Chapman D.N.

A contribution to the concepts of NATM
pp. 188A-188A(1)
Authors: Poisel R.; Engelke H.

Shallow tunnelling in urban areas - some unconventional remarks to the comprehension of the NATM
pp. 188A-188A(1)
Authors: Martak L.; Liebsch H.

Erroneous concepts behind the New Austrian Tunnelling Method
pp. 188A-188A(1)
Author: Kovari K.

Magma's Lower K proceeds at last
pp. 188A-188A(1)
Author: Chadwick J.

Aguamilpa underground penstocks - excavation phase
pp. 188A-188A(1)
Author: Mendez F.

Computer calculations speed tunnel-lining design
pp. 189A-189A(1)
Authors: Sauer G.; Gall V.; Bauer E.

Planung Evinos-Tunnel (Design of Evinos tunnel)
pp. 189A-189A(1)
Author: Vigl A.

Conwy Falls fish pass tunnel
pp. 189A-189A(1)
Author: Byles R.

A sea change on coastal pollution
pp. 189A-189A(1)
Authors: Marriott B.; Tagg T.

An overview of the observational method: development in cut and cover and bored tunnelling projects
pp. 189A-189A(1)
Author: Powderham A.J.

Application of the observational method at the Limehouse Link
pp. 189A-189A(1)
Authors: Glass P.R.; Powderham A.J.

Construction of the Thames Water ring main - with particular regard to the technicalities of the surveying contribution
pp. 189A-189A(1)
Authors: Jones D.E.B.; Sutton M.S.

Rush to stabilise Heathrow chasm
pp. 189A-189A(1)
Author: Oliver A.

The way forward
pp. 189A-189A(1)
Author: Oliver A.

Can the newcomer stand up?
pp. 190A-190A(1)
Author: Wood A.M.

Jubilee stops as probe begins
pp. 190A-190A(1)
Author: Winney M.

The pros and cons of NATM
pp. 190A-190A(1)
Author: Parker D.

The Channel Tunnel
pp. 190A-190A(1)
Author: Winney M.

Computer design development paper wins 1994 Harding Prize
pp. 190A-190A(1)
Author: Snowdon E.

Risk analysis for the Alder tunnel
pp. 190A-190A(1)
Authors: Einstein H.; Chiaverio F.; Koppel U.

Swiss ratify new trans-alpine rail and tunnel links
pp. 190A-190A(1)
Author: Braun J.

Sachseln tunnel drive
pp. 190A-190A(1)
Authors: Scheifele C.; Gugger B.; Wildberger A.; Weber R.

River crossings in the Basque country
pp. 190A-190A(1)
Author: Darling P.

Israel: land of tunnelling opportunity
pp. 190A-191A(2)
Author: Darling P.

Lesotho Highlands water project: excavation of the transfer tunnel
pp. 191A-191A(1)
Authors: Boniface A.; Schutz E.A.; Speirs A.J.H.

High speed tunnelling through TBM (a case study of Dulhasti project of NHPC)
pp. 191A-191A(1)
Authors: Jaggi A.L.; Saxena R.

Managing risks in New South Wales coal mining
pp. 191A-191A(1)
Author: Joy J.

Analysis of key block in the structure of voussoir beam in longwall mining
pp. 191A-191A(1)
Authors: Qian M.; Miao X.; He F.

Three models of technology for mining gently inclined thick coal seam with sub-level caving mining method
pp. 191A-191A(1)
Authors: Wu J.; Yu H.; Zhang H.

Mining zinc and lead at the top of the world
pp. 191A-191A(1)
Author: Chadwick J.

Surface mining of Canadian coal
pp. 191A-191A(1)
Authors: Singhal R.; Collins J.L.; Fytas K.

American Barrick
pp. 191A-191A(1)
Authors: White L.; Kral S.

Selby leads the way with British equipment
pp. 192A-192A(1)
Author: Houghton A.

Computerized mine planning
pp. 192A-192A(1)
Authors: Marshall H.; Francis J.

Pillar extraction at Rajpura-Dariba
pp. 192A-192A(1)
Authors: Dutta S.K.; Dutta S.

Success factors in Australian longwalling
pp. 192A-192A(1)
Author: Crofts G.

BHP Iron Ore Pty Ltd protocol for mine closure Goldsworthy, Western Australia
pp. 192A-192A(1)
Author: Smith P.

Underground monitoring
pp. 192A-192A(1)
Authors: Hinz W.; Jakola R.

The effect of added base on coal wetting ability of nonionic surfactant solutions used for dust control
pp. 192A-192A(1)
Authors: Kim J.; Tien J.C.

Underground solution for wastewater treatment plant
pp. 193A-193A(1)
Author: Wilson D.

Civil engineering and tunnel design
pp. 193A-193A(1)
Authors: Farrow J.P.; Claye P.M.

Planning and design of the Holland Park shaft
pp. 193A-193A(1)
Authors: Binnie C.J.A.; White P.M.; Pearcy B.; Weil D.

Tunnel construction
pp. 193A-193A(1)
Authors: Dick M.; Jaques P.A.

Overcoming ground difficulties at Tooting Bec
pp. 193A-193A(1)
Authors: Clarke R.P.J.; Mackenzie C.N.P.

Double shield TBM excavation technique: recent experiences and future development
pp. 193A-193A(1)
Authors: Grandori R.; Antonini F.

Construction control for underpinning piles and their behaviour during excavation
pp. 193A-193A(1)
Authors: Iwasaki Y.; Watanabe H.; Fukuda M.; Hirata A.; Hori Y.

Prevention and control of water inrush from faults in floor rocks in the workings
pp. 193A-193A(1)
Author: Yang S.

Water pumping in the Lorraine coal mines
pp. 194A-194A(1)
Author: Kroll M.

The roles of spent mushroom substrate for the mitigation of coal mine drainage
pp. 194A-194A(1)
Authors: Stark L.R.; Williams F.M.

A statistical evaluation of remining abandoned coal mines to reduce the effluent contaminant load
pp. 194A-194A(1)
Author: Hawkins J.W.

Kinetic modelling of geochemical processes at the Aitik mining waste rock site in northern Sweden
pp. 194A-194A(1)
Authors: Stromberg B.; Banwart S.

Heavy-metal sludges as smelter feedstock
pp. 194A-194A(1)
Author: Mosher J.

New system brings colliery sludge to the surface using high-density solids pump
pp. 194A-194A(1)
Authors: Kroll N.; Kronenberg J.

Rapid distillationless 'free cyanide' determination by a flow injection ligand exchange method
pp. 194A-194A(1)
Authors: Milosavljevic E.B.; Solujic L.; Hendrix J.L.

Cost factor of groundwater
pp. 195A-195A(1)
Authors: Schneider W.; Pucher K.

The technique of reclaiming subsidence areas by use of a hydraulic dredge pump in Chinese coal mines
pp. 195A-195A(1)
Author: Hu Z.

On the estimation of polynomial breakpoints in the subsidence of the Groningen Gasfield
pp. 195A-195A(1)
Authors: Verhoef H.M.E.; De Heus H.M.

Application of AE technique in monitoring ground pressure
pp. 195A-195A(1)
Authors: Qi Q.; Li S.; Wang S.

Response spectrum of underground protective structures
pp. 195A-195A(1)
Authors: Alwis W.A.M.; Lam K.Y.

Crack propagation and fracture resistance in saline ice
pp. 195A-195A(1)
Authors: DeFranco S.J.; Dempsey J.P.

Glacier sliding over sinusoidal bed and the characteristics of creeping flow over bedrock undulations
pp. 195A-195A(1)
Author: Gudmundson G.H.

Mechanical properties of rafted annual sea ice
pp. 195A-196A(2)
Authors: Poplin J.P.; Wang A.T.

A micromechanics-based constitutive model of polycrystalline ice and FEM analysis for prediction of ice forces
pp. 196A-196A(1)
Authors: Premachandran R.; Horii H.

Analysis of ice fragmentation process from measured particle size distributions of crushed ice
pp. 196A-196A(1)
Author: Tuhkuri J.

Pipe uplift resistance in frozen soil and comparison with measurements
pp. 196A-196A(1)
Authors: Foriero A.; Ladanyi B.

The state of the art in computational dynamic fracture mechanics
pp. 196A-196A(1)
Author: Nishioka T.

The significance of RPG load for fatigue crack propagation and the development of a compliance measuring system
pp. 196A-196A(1)
Authors: Toyosada M.; Niwa T.

Size effects on tensile fracture properties: a unified explanation based on disorder and fractality of concrete microstructure
pp. 196A-197A(2)
Authors: Carpinteri A.; Ferro G.

Stress intensity factor of an elliptical crack as influenced by a spherical inhomogeneity
pp. 197A-197A(1)
Authors: Xiao Z.M.; Lim M.K.; Liew K.M.

Unloading characteristics of anti-plane shear crack in softening materials
pp. 197A-197A(1)
Authors: Zhang X.T.; Hao T.H.; Hwang K.C.

Boundary element weight function analysis of a strip yield crack in a rotating disk
pp. 197A-197A(1)
Authors: Lorenzo J.M.; Cartwright D.J.

T-shaped crack problem for bonded orthotropic layers
pp. 197A-197A(1)
Authors: Erdogan F.; Kadioglu S.

A hybrid technique of modeling of cracks using displacement discontinuity and direct boundary element method
pp. 197A-197A(1)
Authors: Ameen M.; Raghuprasad B.K.

In-situ measurement of the strength of deforming subglacial till
pp. 197A-197A(1)
Authors: Iverson N.R.; Jansson P.; Hooke R.L.

Uplift modeling for fracture mechanics analysis of concrete dams
pp. 197A-197A(1)
Authors: Dewey R.R.; Reich R.W.; Saouma V.E.

The Optimal Shape of Rectangular-like Caverns
pp. 285-300(16)
Authors: Cristescu N.D.; Paraschiv I.

The Radial Line Concept for Cutting Head Pick Lacing Arrangements
pp. 301-311(11)
Author: Hekimoglu O.Z.

Velocity and Amplitude of P-Waves Transmitted through Fractured Zones Composed of Multiple Thin Low-Velocity Layers
pp. 313-324(12)
Authors: Watanabe T.; Sassa K.

The Three Processes of Brittle Crystalline Rock Creep
pp. 325-335(11)
Authors: Boukharov G.N.; Chanda M.W.; Boukharov N.G.

Hydraulic vs Pneumatic Fracturing for In Situ Stress Determination in Rock Salt
pp. 337-342(6)
Authors: Rummel F.; Klee G.; Weber U.

Effect of Turbulence on Fracture Flow and Advective Transport of Solutes
pp. 343-356(14)
Authors: Amadei B.; Carlier J.-F.; Illangasekare T.

In Situ Low Permeability Pulse Test Measurements
pp. 357-363(7)
Authors: Bauer C.; Homand F.; Henry J.P.

Permeability Classification of Coal Seams in China
pp. 365-369(5)
Authors: Yangsheng Z.; Tianhe K.; Yaoqing H.

Direct Measurement of Volume Strain During Experimental Deformation of Porous Materials
pp. 371-373(3)
Authors: Olsen M.P.; Brandon M.T.; Gordon R.B.

Study and Tests of Techniques for Increasing Overcoring Stress Measurement Accuracy
pp. 375-384(10)
Authors: Cai M.; Qiao L.; Yu J.