Polymer Testing

Editorial
pp. 613-613(1)
Author: Brown R.

Wettability of grafted poly(ethylene terephthalate) fibers
pp. 615-618(4)
Authors: Sahi D.; El-Achari A.; Ghenaim A.; Claude Caze

Predictions of normal stress difference during circular duct flow of polymer melts
pp. 619-622(4)
Author: Liang J.-Z.

Analysis of variables influencing the accelerated ageing behaviour of ultra-high molecular weight polyethylene (UHMWPE)
pp. 623-631(9)
Authors: Lu S.; Buchanan F.J.; Orr J.F.

Improved properties of polystyrene-modified asphalt through dynamic vulcanization
pp. 633-640(8)
Authors: Jin H.; Gao G.; Zhang Y.; Zhang Y.; Sun K.; Fan Y.

Infrared reflection of conducting polyaniline polymer coating
pp. 641-646(6)
Authors: Yuan T.; Huang Y.; Dong S.; Wang T.; Xie M.

Evaluation of rheological and mechanical behavior of blends based on polypropylene and metallocene elastomers
pp. 647-652(6)
Authors: Da Silva A.L.N.; Rocha M.C.G.; Coutinho F.M.B.; Bretas R.E.S.; Farah M.

Experimental investigation of deformation mechanisms during low drawing of polymeric fibres
pp. 653-658(6)
Author: Mabrouk M.A.

Thermal analysis of cured chloro epoxy resins and epoxy-acrylate-styrene copolymers
pp. 659-663(5)
Authors: Kagathara V.M.; Parsania P.H.

Correlation between degree of crystallinity, morphology, glass temperature, mechanical properties and biodegradation of poly (3-hydroxyalkanoate) PHAs and their blends
pp. 665-674(10)
Authors: El-Hadi A.; Schnabel R.; Straube E.; Muller G.; Henning S.

Optical analyses of pigment particles in colour concentrates and polypropylene yarns
pp. 675-689(15)
Authors: Van de Velde K.; Van Wassenhove V.; Kiekens P.

Study of selected thermal characteristics of polypropylene/polyethylene binary blends using DSC and TGA
pp. 691-696(6)
Authors: Wong A.C.-Y.; Lam F.

Tribo performance of polyaryletherketone composites
pp. 697-709(13)
Authors: Harsha A.P.; Tewari U.S.

Studies on thermo-mechanical and electrical properties and densities of poly(R,R',4,4'-cyclohexylidene diphenylene diphenyl ether-4,4'-disulfonate)
pp. 711-717(7)
Authors: Patel Y.V.; Parsania P.H.

Evaluation of gas permeability of membranes obtained from poly(urethane-urea)s aqueous dispersions based on hydroxyl-terminated polybutadiene
pp. 719-723(5)
Authors: Coutinho F.M.B.; Delpech M.C.; Garcia M.E.F.

Investigation of effect of temperature and strain rate on mechanical properties of underfill material by use of microtensile specimens
pp. 725-733(9)
Authors: Shi X.Q.; Wang Z.P.; Pang H.L.J.; Zhang X.R.