Fuel and Energy Abstracts

A statistical evaluation on the correlations between thermal fragmentation of South African coal and coal characteristics
pp. 232-232(1)
Authors: van Dyk J.C.; Falcon R.

Assessment of sulphur content of coal from Saoner coal mines
pp. 232-232(1)
Authors: Kamavisdar A.; Sirociya R.S.

Coal resources of Orissa vis-a-vis the growth of Mahanadi Coalfields Limited
pp. 232-232(1)
Authors: Ray M.K.K.; Mishra G.K.

Combustion and fragmentation characteristics of Korean anthracite
pp. 232-232(1)
Author: Lee J.

Comprehensive technique for spontaneous combustion control in the no.1306 fully mechanized caving face in Baodian coal mine, China
pp. 232-232(1)
Author: Wen H.

Correlation for estimating volatile matter of coals
pp. 232-232(1)
Authors: Singh K.P.; Kakati M.C.

Dielectric properties of coal
pp. 232-232(1)
Author: Marland S.

Effect of the sulfur content on the weathering of coal: comparison of two coal beds in Hato de la Virgen (carbonera formation), Venezuela
pp. 232-233(2)
Author: Martinez M.

Elucidation of hydrogen behaviour in coal by using a tritium tracer method: hydrogen transfer reaction of coal with tritiated gaseous hydrogen in a flow reactor
pp. 233-233(1)
Author: Sutrisna I.

Estimation of lignite reserve in the Kalburcayiri field, Kangal basin, Sivas, Turkey
pp. 233-233(1)
Authors: Tercan A.E.; Karayigit A.I.

Geological barrier - a natural rock stratum for preventing confined karst water from flowing into mines in North China
pp. 233-233(1)
Authors: Zhou W.; Li G.

Influence of aromatic structure on pyrolysis reactivity of coal
pp. 233-233(1)
Author: Takagi H.

Kinetics of water adsorption/desorption on bituminous coals
pp. 233-233(1)
Author: McCutcheon A.L.

Method for evaluation of coal quality to predict coke drum strength
pp. 233-233(1)
Authors: Saito K.; Kato K.

Methods for determination of fluorine in coal samples
pp. 233-233(1)
Authors: Nemec J.; Havranek V.

Mineralogy and trace element contents of the Akalin seam, Gelik mine, Zonguldak-Turkey
pp. 233-234(2)
Author: Karayigit A.I.

Modes of occurrence of potassium in coals
pp. 234-234(1)
Author: Han C.

Prediction of the combustion behaviour of blended coals in coal blending for power
pp. 234-234(1)
Author: Dai C.

Prospects for uranium ore deposits in the Voronezh crystalline massif and the Moscow area lignite basin
pp. 234-234(1)
Author: Fomenko A.E.

Quantative X-ray diffraction analysis and its application to various coals
pp. 234-234(1)
Author: Lu L.

Repeatability studies on sulfur analysis of mineral coal
pp. 234-234(1)
Author: Zucchini R.R.

Setting up the model of coal structure and its reactivity
pp. 234-234(1)
Author: Feng J.

Simulation - an approach to risk analysis in coal mining
pp. 234-235(2)
Author: Costa J.F.

Single coal particle behavior in fluidized bed combustion
pp. 235-235(1)
Author: Oka S.N.

Structural analysis of coal through RICO reaction: detailed analysis of heavy fractions
pp. 235-235(1)
Author: Murata S.

Structural studies of Permian 'Gondwana' coals of Barapukuria by infrared spectroscopy
pp. 235-235(1)
Author: Podder J.

Structural studies of vitrinite concentrates of Indian coals by FTIR
pp. 235-235(1)
Author: Bandopadhyay A.K.

The coals of Urals
pp. 235-235(1)
Author: Kornilkov V.N.

The study on the petrographic properties and the purification of Taixi coal, China
pp. 235-235(1)
Authors: Wang Y.; Liu J.

Trace elements in the Lower Pliocene fossiliferous Kangal lignites, Sivas, Turkey
pp. 235-235(1)
Author: Karayigit A.I.

Trace metals in coal: where are they and where are we?
pp. 235-235(1)
Author: Kolker A.

X-ray photoelectron spectroscopy determination of the forms of nitrogen in Tongchuan coal and its chars
pp. 235-235(1)
Author: Liu Y.

Application of water jet pulverization technology
pp. 236-236(1)
Authors: Gong W.; An L.

Biosolubilization of Chinese weathered coal and peat
pp. 236-236(1)
Author: Yang W.

Brown coal organic matter extractives: extraction optimization and identification methods
pp. 236-236(1)
Author: Orinak A.

Chemical demineralization/desulphurization of high sulphur coal using sodium hydroxide and acid solutions
pp. 236-236(1)
Authors: Mukherjee S.; Borthakur P.C.

Coal desulfurization with methanol/water and methanol/KOH
pp. 236-236(1)
Author: Ratanakandilok S.

Colombian coals beneficiation using hydrocyclone separation
pp. 236-236(1)
Author: Barraza J.M.

Density distribution in coal dry separation with air dense medium fluidized bed
pp. 236-236(1)
Author: He Y.

Development of coal preparation in Anhui Province
pp. 236-236(1)
Author: Li X.

Evaluating the coal flotation performance using digital image processing method
pp. 236-236(1)
Author: Wang Z.

Flotoflocculation of coal by beer yeast
pp. 236-236(1)
Authors: Fecko P.; Martin D.

Hydroprocessing of Yanzhou coal and catalytic cracking of slurry oil. I. Coal conversion and product distribution
pp. 237-237(1)
Author: Yan R.

Hydrothermal dewatering of a range of Australian, Indonesian and North American lower rank coals
pp. 237-237(1)
Authors: Favas G.; Jackson W.R.

Influence of mineral matter in coals on the washability of coal
pp. 237-237(1)
Author: Yang Q.

Measurement of coking value, ash content and softening points of hydrogenated coal fractions
pp. 237-237(1)
Author: Laureano-Perez L.

Microwave-assisted extraction of polycyclic aromatic compounds from coal
pp. 237-237(1)
Authors: Kerst M.; Andersson J.T.

Online, CT-based coal washability measurements. Simulated field testing
pp. 237-237(1)
Author: Lin C.L.

Prediction of evolution characteristics of alkali metal compounds in coal combustion/gasification from coal properties
pp. 237-237(1)
Authors: Murakami T.; Naruse I.

Research and application of the expert system for coal blend
pp. 237-237(1)
Author: Ruan W.

Research on the deep-cleaning by selective oil agglomeration
pp. 237-237(1)
Author: Yang Q.

The optimizing control of the fine coal flotation
pp. 237-238(2)
Author: Yang X.

The production of ultra clean coal by chemical demineralisation
pp. 238-238(1)
Authors: Steel K.M.; Patrick J.W.

The role of activation in the chemical treatment of coal
pp. 238-238(1)
Author: Turcaniova L.

Coal information for the 21st century
pp. 238-238(1)
Author: Finkelman R.B.

EPRI's view of global coal technologies for the new century
pp. 238-238(1)
Authors: Courtright H.; Dalton S.

Strategic considerations for clean coal R&D
pp. 238-238(1)
Author: McMullan J.T.

Trends and novel technologies in the coal industry in the USA
pp. 238-238(1)
Author: Salyaev A.V.

Apparatus and method for production of coal-water paste fuel for pressurized fluidized bed boilers
pp. 238-238(1)
Author: Takesaki H.

Bituminous coal pyrolysis tar as feedstock for carbon black production - a preliminary study
pp. 238-239(2)
Authors: Pradhan B.K.; Eser S.

Briquetting method for biomass coal and its influencing factors
pp. 239-239(1)
Author: Xu K.

Characterization of chars from biomass-derived materials: pectin chars
pp. 239-239(1)
Author: Sharma R.K.

Coke quality requirements for blast furnaces. Part 7
pp. 239-239(1)
Author: Cheng A.

Coke quality requirements for blast furnaces. Part 8
pp. 239-239(1)
Author: Cheng A.

Coke quality requirements for blast furnaces. Part 9
pp. 239-239(1)
Author: Cheng A.

Coking pressure. Part II. Effect of process factors on coking pressure
pp. 239-239(1)
Authors: Kardez A.; Winnicka G.

Cooling of briquets by coal fines in the manufacture of smokeless fuel
pp. 239-239(1)
Author: Bryczkowski A.

Coprocessed fuel pellets from coal, biomass and waste
pp. 239-239(1)
Authors: Cobb J.T.; Akers D.J.

High carbon fly ash as a raw material and fuel source in cement manufacture
pp. 239-239(1)
Author: Miller F.M.

Improvement in quality of the delayed coke made from coal gasification pitch by addition of FCC decanted oil to the feedstock
pp. 240-240(1)
Author: Clark J.G.

Influence of additive on the modification action of coal-tar pitch and on the properties of its pitch coke
pp. 240-240(1)
Author: Liu H.

Method for adjusting the chlorine concentration of coke in manufacturing metallurgical coke
pp. 240-240(1)
Author: Nomura S.

Product distribution from coal pyrolysis in circulating fluid-bed reactor
pp. 240-240(1)
Authors: Eciko M.; Kubica K.

Production of a low porosity coal product by using a modified hydrothermal dewatering technique
pp. 240-240(1)
Authors: Favas G.; Jackson W.R.

Reactivity for low-temperature oxidation of brown coal and upgraded brown coal
pp. 240-240(1)
Authors: Shimizu T.; Okuma O.

Research on the industrial utilization of and combustion of clean desulphurized briquette
pp. 240-240(1)
Author: Qian J.

A method for treating a hydrocarbon-containing formation
pp. 240-240(1)
Author: Stegemeier G.L.

An inventory analysis of oil shale energy produced on a small thermal power plant
pp. 240-240(1)
Authors: Talve S.; Riipulk V.

Application of boron isotopes to the understanding of fluid-rock interactions in a hydrothermally stimulated oil reservoir in the Alberta Basin, Canada
pp. 240-241(2)
Author: Williams I.B.

Environmental, thermal and hydrodynamic influence of the fuel composition in the CFB plant of SOMEDITH (60 MWth), France
pp. 241-241(1)
Author: Evrard R.

Fluid flow in the South Eugene Island area, offshore Louisiana: results of numerical simulations
pp. 241-241(1)
Author: Roberts S.J.

Foaming well-killing composition based on organic foam and CaCl₂ for oil and gas wells
pp. 241-241(1)
Author: Tagirov K.M.

Late Yeadonian (Upper Sandstone Group) incised valley supply and depositional systems in the South Wales peripheral foreland basin: implications for the evolution of the Culm Basin and for the Silesian hydrocarbon plays of onshore and offshore UK
pp. 241-241(1)
Author: George G.

Petroleum solid adherence on tubing surface
pp. 241-241(1)
Author: Cosultchi A.

Predicting oil saturation from velocities using petrophysical models and artificial neural networks
pp. 241-241(1)
Author: Boadu F.K.

Refractive index measurements of diluted bitumen solutions
pp. 241-242(2)
Author: Taylor S.D.

Rheological evidence of structural phase transitions in asphaltene-containing petroleum fluids
pp. 242-242(1)
Author: Evdokimov I.N.

Solids contents, properties and molecular structures of asphaltenes from different oilsands
pp. 242-242(1)
Author: Zhao S.

Composition for dewatering and desalting of crude oil and protection of equipment against asphaltenetar-paraffin wax deposits
pp. 242-242(1)
Author: Varnavskaya O.A.

Hydrocracking catalysts for conversion of high- boiling Fischer-Tropsch waxes to diesel fuel components
pp. 242-242(1)
Author: Liwanga-Ehumbu A.

Hydrotreating technology for middle fraction (kerosene and gas oil) of coal liquid
pp. 242-242(1)
Author: Uesugi K.

Influence of addition of pure components on the structural state of multi-n-alkane mixtures
pp. 242-242(1)
Author: Petitjean D.

Process and apparatus for converting oil shale or tar sands to oil
pp. 242-242(1)
Author: Kirkbride C.G.

Research on upgrading technology for coal liquefied oil using a process development unit
pp. 242-242(1)
Author: Shiraha T.

Transportation of coal by slurry pipeline
pp. 242-243(2)
Author: Marrero T.

Distortion, illusion and confusion: how to improve global oil market data
pp. 243-243(1)
Author: Tempest P.

Ethanol as a lead replacement: phasing out leaded gasoline in Africa
pp. 243-243(1)
Authors: Thomas V.; Kwong A.

Forecasting the United Kingdom's supplies and demands for fluid fossil-fuels
pp. 243-243(1)
Authors: Mackay R.M.; Probert S.D.

Oil price fluctuations and their impact on the macroeconomic variables of Kuwait: a case study using a VAR model
pp. 243-243(1)
Authors: Eltony M.N.; Al-Awadi M.

The impact of oil price on additions to US proven reserves
pp. 243-243(1)
Author: Farzin Y.H.

The politics of oil in Lithuania: strategies after transition
pp. 243-243(1)
Authors: Pasukeviciute I.; Roe M.

A comparison of liquid hot water and steam pretreaments of sugar cane bagasse for bioconversion to ethanol
pp. 243-244(2)
Author: Laser M.

Advanced feed systems for gasification of high density slurry fuels from low value feedstocks
pp. 244-244(1)
Author: Hoang S.L.

Catalytic liquefaction of coal with highly dispersed Fe₂S₃ impregnated in-situ
pp. 244-244(1)
Author: Hu H.

Coproduction of electric power and high quality transportation fuels in one facility
pp. 244-244(1)
Authors: Gray D.; Tomlinson G.

Feasibility study on direct coal liquefaction in Indonesia
pp. 244-244(1)
Author: Yanai S.

Fischer-Tropsch process and catalysts for the manufacture of hydrocarbons
pp. 244-244(1)
Author: Manzer L.M.

IGCC technology for low grade Indian coals
pp. 244-244(1)
Authors: Basu K.; Ramani N.V.S.

Liquefaction of brown coal by rubber-degrading micro-organisms
pp. 244-244(1)
Author: Fuechtenbusch B.

Manufacture of composite liquid fuel
pp. 244-244(1)
Author: Tomilov V.

Mathematical modeling of low temperature methanol synthesis in a bubble slurry reactor
pp. 244-244(1)
Author: Zhao Y.

NEDOL coal liquefaction development for supplying transportation fuels
pp. 244-245(2)
Author: Wasaka S.

Prediction of coal liquefaction reactivity by solid state ¹³C NMR spectral data
pp. 245-245(1)
Author: Yoshida T.

Process for hydrogenating raw material of hydrocarbon
pp. 245-245(1)
Author: Zeng R.

Process for the production of liquid hydrocarbons from gaseous hydrocarbons
pp. 245-245(1)
Authors: Huisman H.M.; Willem De Leeuw K.

Process for the purification of 1-pentene or lower alpha olefins prepared by the Fischer-Tropsch reaction
pp. 245-245(1)
Author: Becker H.

Prospects on R&D in coal chemical industry. IV. Synthesis of fuels from coal via Fischer-Tropsch reaction
pp. 245-245(1)
Author: Xiang H.

Second law analysis of hydrogen liquefiers operating on the modified Collins cycle
pp. 245-245(1)
Author: Syed M.T.

Studies on hydrogen transfer in co-liquefaction of coal with waste plastics using ³H tracer techniques. II. Hydrogen transfer from hydrogen-rich plastic
pp. 245-245(1)
Author: Wang L.

Winter diesel fuel production from a Fischer-Tropsch wax
pp. 245-245(1)
Author: Berlowitz P.J.

Best practices for enhanced gob gas recovery and purity
pp. 246-246(1)
Author: Harpalani S.

Carboniferous natural gas of Paskov coal mine of Dul Paskov, Czechska, optimal recovery increase in relation to natural and technical operational recovery conditions
pp. 246-246(1)
Author: Dragon V.

Dehydration of natural gas using solid desiccants
pp. 246-246(1)
Author: Gandhidasan P.

Dense phase coal conveying for ARCH process
pp. 246-246(1)
Author: Asaoka Y.

Energy production and emission reduction by utilization of pit and seam gas
pp. 246-246(1)
Author: Radgen P.

Major and minor structural features of a bedding shear zone along a coal seam and related gas outburst, Pingdingshan coalfield, northern China
pp. 246-246(1)
Author: Li H.

Possibility analysis of simultaneous extraction of coal and coalbed methane in China
pp. 246-246(1)
Authors: Li S.; Xu J.

Scenario with inert matrix fuel: a specific study
pp. 246-246(1)
Author: Doriath J.Y.

Transient gas-liquid two-phase flow in pipes with radial influx or efflux
pp. 246-246(1)
Authors: Quyang L.; Aziz K.

An eclectic approach in energy forecasting: a case of Natural Resources Canada's (NRCan's) oil and gas outlook
pp. 247-247(1)
Authors: Persuad A.J.; Kumar U.

New technologies and experience with regional gasifications in Russia
pp. 247-247(1)
Author: Nikiforov V.N.

The future of gas infrastructures in Eurasia
pp. 247-247(1)
Author: Klaassen G.

A new comprehensive model for coal hydrogasification
pp. 247-247(1)
Author: Gao H.

Advanced high-temperature, high-pressure transport reactor gasification
pp. 247-247(1)
Authors: Swanson M.L.; Hajicek D.R.

Apparatus for hydrogasification of coal using hydrogen-oxygen burner
pp. 247-247(1)
Authors: Nomura K.; Shoji Y.

Coal gasification characteristics in a downer reactor
pp. 247-247(1)
Author: Kim Y.J.

Coal hydrogasification process for the production of SNG and chemicals
pp. 247-247(1)
Author: Noguchi F.

Demonstration of an intermittent circulating fluidized bed coal gasification process for industrial application
pp. 247-247(1)
Author: Zhou H.

Development of coal hydrogasification technology 3. Simulation incorporated the hydro-pyrolysis model into computational fluid dynamics
pp. 248-248(1)
Author: Asaoka Y.

Development of pressurized internally circulating fluidized bed gasification technology (PICFG)
pp. 248-248(1)
Author: Toyoda S.

Development of slurry phase dimethyl ether synthesis technology
pp. 248-248(1)
Author: Mogi Y.

Dual-chambered carbonization-gasification reactor with integrated oxidation-reduction zone for manufacture of fuel gases
pp. 248-248(1)
Author: Joos B.

Energy efficient simultaneous oxidative conversion and thermal cracking of ethane to ethylene using supported BaO/La₂O₃ catalyst in the presence of limited O₂
pp. 248-248(1)
Authors: Choudhary V.R.; Mulla S.A.R.

Full scale Sasol/Lurgi fixed bed test gasifier project: experimental design and test results
pp. 248-248(1)
Authors: Keyser M.J.; van Dyk J.C.

Gasification of char particles in packed beds: analysis and results
pp. 248-248(1)
Authors: Dasappa S.; Paul P.J.

Gasification technologies I: applications. DOE early entrance co-production plant updates
pp. 248-248(1)
Authors: Shah L.; Schrader C.

Gasification technologies I: applications. Texaco Gasification and Fischer-Tropsch (TGFT) process
pp. 248-248(1)
Authors: Schrader C.; Shah L.

Influence of ash on Pingshuo (China) char gasification reactivity
pp. 248-249(2)
Author: Ye J.

Initial operation of the PSDF transport gasifier
pp. 249-249(1)
Author: Smith P.V.

Intrinsic char gasification reactivity from TGA measurements
pp. 249-249(1)
Author: Ren J.

Investigation into coal gasification in an industrial jetting fluidized bed gasifier
pp. 249-249(1)
Author: Duan Y.

Investigation of nickel supported catalysts for the upgrading of brown peat derived gasification products
pp. 249-249(1)
Author: Sutton D.

Kinetics of gasification in a fixed bed reactor with steam-oxygen mixtures
pp. 249-249(1)
Authors: Conradie M.; Prinsloo F.F.

Manufacture of dimethyl ether using hydrogen separated from coal mine gas-derived synthesis gas
pp. 249-249(1)
Authors: Inoue N.; Hiramatsu T.

Manufacture of synthesis gas for gasoline, gas oil, and kerosene manufacturing
pp. 249-249(1)
Authors: Iijima M.; Kobayashi K.

Mathematical modeling and simulation of bubbling fluidized bed gasifiers
pp. 249-249(1)
Authors: Hamel S.; Krumm W.

Method for the gasification of coal
pp. 249-250(2)
Author: Katayama Y.

Modelling and simulation of bubbling fluidized bed gasification reactors
pp. 250-250(1)
Authors: Hamel S.; Krumm W.

Nonconventional gas produced from coal
pp. 250-250(1)
Author: Kreinin G.V.

Novel gas cleaning/conditioning for integrated gasification combined cycle
pp. 250-250(1)
Author: Abbasian J.

One dimensional numerical simulation of coal gasification in an industrial, jetting, fluidized-bed gasifier
pp. 250-250(1)
Author: Duan Y.

Potential of gasification in the US refining industry
pp. 250-250(1)
Authors: Gray D.; Tomlinson G.

Producing coal gas by half water gas mixed with exhaust of synthetic ammonia from fertilizer plants
pp. 250-250(1)
Author: Zhou M.

R&D strategies of clean coal technology in Korea: development case of IGCC Technology
pp. 250-250(1)
Author: Lee I.Y.

Rapid steam gasification of char formed by flash pyrolysis of low-rank coals
pp. 250-250(1)
Author: Takahashi H.

Strategies for advanced research and commercialization in synthesis gas conversion
pp. 250-250(1)
Author: Nowak M.

The effect of microcrystalline changes on gasification reactivity of char
pp. 250-251(2)
Author: Zhao W.

The effects of hydrogen during steam gasification
pp. 251-251(1)
Authors: Lu W.; Calo J.M.

Yields of hydrogen-rich gaseous products via pyrolysis from selected biomass samples
pp. 251-251(1)
Author: Demirbas A.

A correlation study of trace elements in lignite and fly ash generated in a power station
pp. 251-251(1)
Author: Iordanidis A.

Carbon attrition from Australian black coals in pressurized fluidized bed combustion (PFBC)
pp. 251-251(1)
Authors: Wang A.L.T.; Stubington J.F.

Characterization of fly ash from the co-combustion of coal, tires, and petroleum coke
pp. 251-251(1)
Author: Hower J.C.

Classification characteristics of unburned carbon from coal fly ash using a cyclone classifier
pp. 251-251(1)
Author: Kim J.K.

Combustion test device of powdered coal under weightless environment
pp. 251-251(1)
Authors: Takafuji M.; Suda T.

Comparison of the loss-on-ignition and thermogravimetric analysis techniques in measuring unburned carbon in coal fly ash
pp. 252-252(1)
Authors: Fan M.; Brown R.C.

Extractive distillation process for the removal of organic byproducts from a Fischer-Tropsch alpha-olefin crude product using aqueous NMP
pp. 252-252(1)
Author: Becker H.

Fly ash beneficiation: dealing with the consequences of air emission requirements
pp. 252-252(1)
Authors: Gasiorowski S.A.; Bittner J.D.

Fly ash from fluidized bed coal combustion as complex cement addition
pp. 252-252(1)
Author: Roszczynialski W.

High-surface-area activated carbon from Chinese coal
pp. 252-252(1)
Authors: Zou Y.; Han B.

Kinetics of metal oxide-catalysed CO₂ gasification of coal in a fluidized-bed reactor for solar thermochemical process
pp. 252-252(1)
Author: Kodama T.

Low temperature formation of aromatic hydrocarbon from pyrolysis of cellulosic materials
pp. 252-252(1)
Author: Hajaligol M.

Mechanistic study on gas formation during coal liquefaction
pp. 252-252(1)
Author: Nomura M.

Mounting fly ash problems in growing coal based power stations - few pragmatic approaches towards a solution
pp. 252-252(1)
Author: Basu K.

Phase composition of fly ashes from power-plant coal combustion and its effect on the environment
pp. 252-252(1)
Author: Smolka-Danielowska D.

Predicting the ash behaviour of different fuels in fluidized bed combustion
pp. 252-253(2)
Author: Skrifvars B.

Solid materials in the reactors of 150 tons of coal per day liquefaction pilot plan
pp. 253-253(1)
Author: Aramaki T.

Solid products found in 150 t/d pilot plant of coal liquefaction (II). Massive coking matter appeared inside the heating coil of vacuum tower heating furnace
pp. 253-253(1)
Author: Aramaki T.

Stabilization/solidification of coal tar
pp. 253-253(1)
Authors: Bedessem J.; Quillen D.

Structural characterization of carbon nanofibers obtained by hydrocarbon pyrolysis
pp. 253-253(1)
Author: Endo E.

Studies of mercury distribution in fly ash at a Kentucky power plant
pp. 253-253(1)
Author: Hower J.C.

Study of nitrogen and sulphur distribution and functional forms during coal pyrolysis
pp. 253-253(1)
Author: You X.

Study on dynamic characteristics of sulfur release during Changguang coal combustion
pp. 253-254(2)
Author: Liu J.

Synthesis and characterisation of different products from fly ash
pp. 254-254(1)
Author: Vishwakarma M.

System for predicting ash deposits on coal gasification apparatus by measurement of electric conductivity
pp. 254-254(1)
Authors: Hanayama F.; Nishida T.

Technology for preparing activated carbon
pp. 254-254(1)
Author: Liu Z.

The experimental investigation on the coal ash formation in CFB combustion
pp. 254-254(1)
Author: Tang Z.

The formation of aromatics from the gas-phase pyrolysis of stigmasterol: kinetics
pp. 254-254(1)
Author: Shin E.

The Western Maryland coal combustion byproducts/acid mine drainage initiative: the Winding Ridge demonstration project
pp. 254-254(1)
Authors: Rafalkol L.; Petzrick P.

Utilization of FBC ashes
pp. 254-254(1)
Author: Shi Z.

Vaporization of arsenic, selenium and antimony during coal combustion
pp. 254-254(1)
Authors: Zeng T.; Sarofim A.F.

A comparative study to investigate burnup in research reactor fuel using two independent experimental methods
pp. 255-255(1)
Author: Iqbal M.

A numerical neutronics benchmark study for inert matrix plutonium fuels in uranium dioxide and mixed plutonium-uranium dioxide environments
pp. 255-255(1)
Author: Paratte J.M.

A scale analysis of the turbulent mixing rate for various Prandtl number flow fields in rod bundles
pp. 255-255(1)
Authors: Kim S.; Chung B.

Accelerator driven energy production: a comment
pp. 255-255(1)
Author: Degweker S.B.

An experimental study and assessment of existing friction factor correlations for wire-wrapped fuel assemblies
pp. 255-255(1)
Authors: Chun M.; Seo K.

Application of high strength MnMoNi steel to pressure vessels for nuclear power plant
pp. 255-255(1)
Author: Suzuki K.

Build-up of actinides in irradiated fuel rods of the ET-RR-1 reactor
pp. 255-255(1)
Authors: Adib M.; Morcos H.N.

Categorisation and priorities for future research on inert matrix fuels: an extended synthesis of the panel discussions
pp. 255-255(1)
Authors: Chawla R.; Konings R.J.M.

Cermet fuel in a light water reactor: a possible way to improve safety. Part I. Fabrication and characterization
pp. 255-255(1)
Author: Troyanov V.

Cermet fuel in a light water reactor: a possible way to improve safety. Part II. Testing the fuel
pp. 255-256(2)
Author: Troyanov V.

Coated particle fuel to improve safety, design, economics in water-cooled and gas-cooled reactors
pp. 256-256(1)
Author: Porta J.

Complex behavior in quaternary zirconias for inert matrix fuel: what do these materials look like at the nanometer scale?
pp. 256-256(1)
Author: Conradson S.D.

Composite materials and systems as alternative inert matrix fuel to dispose civil or weapon grade plutonium in light water reactors
pp. 256-256(1)
Author: Vatulin A.V.

Control of reactor pulses by external neutron injection
pp. 256-256(1)
Authors: Pepyolyshev Y.N.; Popov A.K.

Current status of researches on the plutonium rock-like oxide fuel and its burning in light water reactors
pp. 256-256(1)
Author: Yamashita T.

Dissolution and analysis of erbium doped cermet fuels
pp. 256-256(1)
Author: Coulon J.

Dynamics aspects of plutonium burning in an inert matrix
pp. 256-256(1)
Authors: Damen P.M.G.; Kloosterman J.L.

Elements of comparison between different inert matrix fuels as regards plutonium utilisation and safety coefficients
pp. 256-256(1)
Authors: Baldi S.; Porta J.

Experimental study and modelling of the thermoelastic behaviour of composite fuel in reactors - emphasis on spinel based composites
pp. 256-257(2)
Author: Georgenthum V.

Fission-gas release in a spinel-based fuel used for actinide transmutation
pp. 257-257(1)
Author: Bakker K.

Fluid-structure-interaction for the analysis of the dynamics of fuel storage racks in the case of seismic loads
pp. 257-257(1)
Authors: Stabel J.; Ren M.

Improved method to demonstrate the structural integrity of high density fuel storage racks
pp. 257-257(1)
Author: Hinderks M.

In-service monitoring and fractographic inspection of ultrasonic indications on a feed water suction pipe of the Gundremmingen nuclear power plant
pp. 257-257(1)
Author: Hofstotter P.

Inert matrix and thoria fuels for plutonium elimination
pp. 257-257(1)
Author: Lombardi C.

Inert matrix fuel for the utilisation of plutonium
pp. 257-257(1)
Author: Ledergerber G.

Integral measurements with a plutonium inert matrix fuel rod in a heterogeneous light water reactor lattice
pp. 257-257(1)
Author: Chawla R.

Measurement of the mechanical properties of thermally-shocked zirconia-based simulated inert matrix fuel
pp. 257-257(1)
Author: Lee Y.

Mechanistic modeling for ring-type BWR fuel spacer design 2. Local pressure drop and narrow channel effect
pp. 257-257(1)
Author: Yano T.

Point kinetic model for fluid fuel systems
pp. 258-258(1)
Author: Lapenta G.

Progress in the studies of the Advanced Plutonium fuel Assembly
pp. 258-258(1)
Author: Puill A.

Protection against high-energy line breaks in WWER power plants
pp. 258-258(1)
Author: Andersen A.

Requirements for High Temperature Reactor fuel particle design assessment
pp. 258-258(1)
Author: Chapelot P.

Rock-like oxide fuel behaviour under reactivity initiated accident conditions
pp. 258-258(1)
Author: Nakamura T.

Specific fuel rod thermomechanical studies for the Advanced Plutonium fuel Assembly concept
pp. 258-258(1)
Author: Brochard J.

Temperature distribution in nuclear fuel rod and variation of the neutronic performance parameters in (D-T) driven hybrid reactor system
pp. 258-258(1)
Author: Yapici H.

The effect of stochastic perturbation of fuel distribution on the criticality of a one speed reactor and the development of multi-material multinomial line statistics
pp. 258-259(2)
Authors: Jahshan S.N.; Singleterry R.C.

The irradiation test of Inert-Matrix Fuel in comparison to uranium plutonium mixed oxide fuel at the Halden Reactor
pp. 259-259(1)
Author: Kasemeyer U.

The modeling of fuel rod behaviour under RIA conditions in the code DYN3D
pp. 259-259(1)
Author: Rhode U.

X-ray diffraction analysis and data interpretation of stabilized zirconia inert matrix fuel doped with plutonium
pp. 259-259(1)
Author: Burghartz M.

Dismantling of nuclear power in Germany: sectoral and macroeconomic effects
pp. 259-259(1)
Authors: Welsch H.; Ochsen C.

A new composite cathode for high-performance lithium-polymer batteries
pp. 259-259(1)
Author: Prosini P.P.

A study of the overcharge reaction of lithium-ion batteries
pp. 259-259(1)
Author: Leising R.A.

Aging mechanism in Li ion cells and calendar life predictions
pp. 260-260(1)
Author: Broussely M.

Analysis of a molten carbonate fuel cell: cogeneration to produce electricity and cold water
pp. 260-260(1)
Author: Silveira J.L.

Application of ICP-MS to a trace elements mass balance study in a power plant
pp. 260-260(1)
Author: Bettinelli M.

Carbon monoxide poisoning of proton exchange membrane fuel cells
pp. 260-260(1)
Authors: Baschuk J.J.; Li X.

Characteristics of transient operation of a dual-pressure bottoming system for the combined cycle power plant
pp. 260-260(1)
Author: Kim T.S.

Commercial experience with circulating fluidized-bed system (2x125 MWe) by using Indian lignitic coal for power generation - case studies
pp. 260-260(1)
Author: Palit A.

Commissioning of the circulating PFBC in the Foster Wheeler advanced PFBC train at the PSDF
pp. 260-260(1)
Author: Wheeldon J.M.

Computational fluid dynamics study of phosphotungstic acid electrolyte-based fuel cell (PWAFC)
pp. 260-260(1)
Author: Lavric I.

Creep characteristics of porous Ni/Ni₃Al anodes for molten carbonate fuel cells
pp. 261-261(1)
Author: Kim Y.

Cycle life estimation of Lithium secondary battery by extrapolation method and accelerated aging test
pp. 261-261(1)
Author: Takei K.

Design and part-load performance of a hybrid system based on a solid oxide fuel cell reactor and a micro gas turbine
pp. 261-261(1)
Author: Costamagna P.

Designer opportunity fuels for the Willow Island generating station of Allegheny Energy Supply Company, LLC
pp. 261-261(1)
Author: Tillman D.A.

Development of high energy density Li-ion batteries based on LiNi_1-x-yCo_xAl_yO₂
pp. 261-261(1)
Author: Weaving J.S.

Development of long life lithium in battery for power storage
pp. 261-261(1)
Author: Majima M.

Development of solid polymer lithium secondary batteries
pp. 261-261(1)
Author: Kuratomi J.

Drying technologies for more efficient power generation from low rank coal: comparison of products from various processes
pp. 261-261(1)
Author: Chaffee A.L.

Factors responsible for impedance rise in high power lithium ion batteries
pp. 261-262(2)
Author: Amine K.

High energy density, thin-film, rechargeable lithium batteries for marine field operations
pp. 262-262(1)
Author: Huang B.

High-capacity carbons for lithium-ion batteries prepared from rice husk
pp. 262-262(1)
Authors: Fey G.T.; Chen C.

Humidification studies on polymer electrolyte membrane fuel cell
pp. 262-262(1)
Author: Sridhar P.

Influence of carbon black and binder on Li-ion batteries
pp. 262-262(1)
Author: Fransson L.

Lithium metal/polymer battery
pp. 262-262(1)
Authors: Osaka T.; Momma T.

Manganese type lithium ion battery for pure and hybrid electric vehicles
pp. 262-262(1)
Author: Horiba T.

Mixed-reactant, strip-cell direct methanol fuel cells
pp. 262-262(1)
Author: Barton S.C.

New thin lithium-ion batteries using a liquid electrolyte with thermal stability
pp. 262-262(1)
Author: Takami N.

Overview of ENEA's Projects on lithium batteries
pp. 262-263(2)
Author: Alessandrini F.

Perspectives of coal-based power generation
pp. 263-263(1)
Author: Sohn G.

Predicting the pressure drop across hot gas ceramic filter installed in a commercial size pressurized fluidized bed combustion system
pp. 263-263(1)
Author: Sasatsu H.

Research on highly reliable solid-state lithium batteries in NIRIM
pp. 263-263(1)
Author: Takada K.

Steps on the path towards new coal-fired power plants - the VGB joint research programme KOMET 650
pp. 263-263(1)
Author: Koster C.

Symmetric cell approach and impedance spectroscopy of high power lithium-ion batteries
pp. 263-263(1)
Author: Chen C.H.

The status of Sony Li-ion polymer battery
pp. 263-263(1)
Author: Kezuka K.K.

The two-phase battery concept: a new strategy for high performance lithium polymer batteries
pp. 263-263(1)
Author: Prosini P.P.

The Wabash River integrated methanol and power production from clean coal technologies (IMPPCCT) project
pp. 263-264(2)
Authors: Benedict D.E.; Strickland D.

Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles
pp. 264-264(1)
Author: Sato N.

Thermodynamic analysis of reheat cycle steam power plants
pp. 264-264(1)
Authors: Dincer I.; Al-Muslim H.

Water transport in the proton-exchange-membrane fuel cell: measurements of the effective drag coefficient
pp. 264-264(1)
Authors: Janssen G.J.M.; Overvelde M.L.J.

Year 2000 R&D status of large-scale lithium ion secondary batteries in the national project of Japan
pp. 264-264(1)
Author: Tanaka T.

A model-based analysis of strategic consolidation in the German electricity industry
pp. 264-264(1)
Author: Bower J.

An update of the Kladno Project: first IPP in the Czech Republic
pp. 264-264(1)
Authors: Rode J.R.; Tichy O.J.

Credible regulatory threats
pp. 264-264(1)
Author: Acutt M.

Defining electricity markets: an arbitrage cost approach
pp. 264-264(1)
Author: Kleit A.N.

Eco-labeling of electricity - strategies and tradeoffs in the definition of environmental standards
pp. 264-265(2)
Author: Truffer B.

Electricity tariffs in India: an assessment of consumers' ability and willingness to pay in Gujarat
pp. 265-265(1)
Authors: Bose R.K.; Shukla M.

Finessing the unintended outcomes of price-cap adjustments: an electric utility multi-product perspective
pp. 265-265(1)
Author: Seeto D.Q.

From planning to strategy in the electricity industry
pp. 265-265(1)
Authors: Dyner I.; Larsen E.R.

Future electric power technology choices of Brazil: a possible conflict between local pollution and global climate change
pp. 265-265(1)
Author: Schaeffer R.

Inertia in the North American electricity industry: is it realistic to think that the Kyoto Protocol objectives can be met?
pp. 265-265(1)
Author: Jacques C.

Investment planning for electricity generation expansion in a hydro dominated environment
pp. 265-265(1)
Author: Kenfack F.

Market definition and dominant position abuse under the new electricity trading arrangements in England and Wales
pp. 265-265(1)
Authors: Emmanuel R.; Macatangay A.

Market dispatch incorporating stability constraints
pp. 265-266(2)
Authors: Chattopadhyay D.; Gan D.

Opportunities and perils of the newly liberalized European electricity markets
pp. 266-266(1)
Author: Sioshansi F.

Privatizing and liberalizing electricity, the case of Hungary
pp. 266-266(1)
Author: Bakos G.

The financing of the Mexican electrical sector
pp. 266-266(1)
Author: Islas J.

US consumers' willingness to pay for green electricity
pp. 266-266(1)
Author: Roe B.

Waiting for the boom: a simulation study of power plant construction in California
pp. 266-266(1)
Author: Ford A.

What went wrong in California's electricity market?
pp. 266-266(1)
Author: Woo C.

Assessment of the potential of willow SRC plants for energy production in areas contaminated by radionuclide deposits: methodology and perspectives
pp. 266-266(1)
Author: Goor F.

Barriers and considerations in using poultry wastes as combustor and gasifier fuels
pp. 266-267(2)
Authors: Wachter J.K.; James R.

Biomass for energy or materials? A Western European systems engineering perspective
pp. 267-267(1)
Author: Gielen D.J.

Catalysed and uncatalysed steam gasification of eucalyptus char: influence of variables and kinetic study
pp. 267-267(1)
Author: Encinar J.M.

Cattle feedlot manure quality for coal/biomass blend combustion
pp. 267-267(1)
Author: Sweeten J.M.

Co-firing of bark and sub-bituminous coal on stoker and fluidized bed systems
pp. 267-267(1)
Author: Clemens A.H.

Determination of the optimal quantity of crop residues for energy in sugarcane crop management using linear programming in variety selection and planting strategy
pp. 267-267(1)
Author: Sartori M.M.P.

Farm animal manure is an important sustainable renewable energy resource
pp. 267-267(1)
Author: Sheffield J.

Fuel supply strategies for large-scale bio-energy projects in developing countries. Electricity generation from agricultural and forest residues in Northeastern Thailand
pp. 267-268(2)
Author: Junginger M.

Impacts of biomass power generation and CO₂ taxation on electricity generation expansion planning and environmental emissions
pp. 268-268(1)
Author: Santisirisomboon J.

Issues and approaches in animal waste utilization in Canada
pp. 268-268(1)
Author: Gogolek P.E.G.

Methods of processing a variety of biomass fuel types to co-fire with coal
pp. 268-268(1)
Author: Jones J.R.

Potentials for electricity production from wood in Ireland
pp. 268-268(1)
Author: van den Broek R.

Straw quality for its combustion in a straw-fired power plant
pp. 268-268(1)
Author: Alica J.H.

Geothermal energy utilization in Turkey
pp. 268-268(1)
Author: Gunerhan G.G.

A hybrid power generation system: solar-driven Rankine engine-hydrogen storage
pp. 268-269(2)
Author: Yang W.

Calculation of the PV modules angular losses under field conditions by means of an analytical model
pp. 269-269(1)
Authors: Martin N.; Ruiz J.M.

Empirical investigation of the energy payback time for photovoltaic modules
pp. 269-269(1)
Authors: Knapp K.; Jester T.

Evolution of space solar cells
pp. 269-269(1)
Author: Iles P.A.

Limiting carrier effect in a-Si:H solar cells
pp. 269-269(1)
Author: Prentice J.S.C.

Long-term stability of low-power dye-sensitised solar cells prepared by industrial methods
pp. 269-269(1)
Authors: Pettersson H.; Gruszecki T.

Network analysis of fault-tolerant solar photovoltaic arrays
pp. 269-269(1)
Authors: Gautam N.K.; Kaushika N.D.

Performance evaluation of solar photovoltaic/thermal systems
pp. 269-269(1)
Author: Huang B.J.

Photovoltaic cogeneration in the built environment
pp. 269-269(1)
Author: Bazilian M.D.

Preparation and characterization of CulnS₂ thin films solar cells with large grain
pp. 269-270(2)
Author: Onuma Y.

Remote monitoring of PV performance using geostationary satellites
pp. 270-270(1)
Author: Perez R.

Solar cells from thin silicon layers on Al₂O₃
pp. 270-270(1)
Author: Nell M.E.

Solid-state photoelectrochemical cell using a polythiophene derivative as photoactive electrode
pp. 270-270(1)
Author: Gazotti W.A.

Studies on photoelectrochemical (PEC) cell formed with SILAR deposited Bi₂Se₃&unknown;Sb₂Se₃ multilayer thin films
pp. 270-270(1)
Authors: Sankapal B.R.; Lokhande C.D.

Temperature dependence of photocurrent components on enhanced performance GaAs/AlGaAs multiple quantum well solar cells
pp. 270-270(1)
Author: Aperathitis E.

The exergy of stratified thermal energy storages
pp. 270-270(1)
Author: Rosen M.A.

The experimental validation of a comprehensive unified model for optics and heat transfer in line-axis solar energy systems
pp. 270-270(1)
Author: Eames P.C.

The level of complexity needed for weather data in models of solar system performance
pp. 270-270(1)
Authors: Boland J.; Dik M.

The role of bypass diodes in the failure of solar battery charging stations in Thailand
pp. 270-270(1)
Authors: Greacen C.; Green D.

A transition toward a sustainable energy future: feasibility assessment and development strategies of wind power in Taiwan
pp. 271-271(1)
Author: Yue C.

An analysis of the feasibility of using broiler litter as a fuel
pp. 271-271(1)
Authors: Martin J.H.; Lefcort M.D.

Combustion method and apparatus for solid wastes using combustion residue as fuel
pp. 271-271(1)
Author: Arato T.

Economic justification of the Snowy scheme
pp. 271-271(1)
Author: Lunney H.W.M.

Energy from waste incineration - a state of the art emissions review with an emphasis on public acceptability
pp. 271-271(1)
Author: Porteous A.

Energy production and use from non-biogas aerobic thermophilic treatment of swine waste
pp. 271-271(1)
Author: Blackburn J.W.

High temperature co-treatment of bottom ash and stabilized fly ashes from waste incineration
pp. 271-271(1)
Author: Sorensen M.A.

Protecting the forest from the trees: the social costs of energy production in Sweden
pp. 271-271(1)
Authors: Miranda M.L.; Hale B.

Removal of organic chlorine compounds by catalytic dehydrochlorination for the refinement of municipal waste plastic derived oil
pp. 272-272(1)
Author: Lingaiah N.

The renewable portfolio standard: design considerations and an implementation survey
pp. 272-272(1)
Authors: Berry T.; Jaccard M.

Whole tires/mixed-feedstock gasification for syngas production
pp. 272-272(1)
Author: Phillips B.D.

An investigation of carbon loss in CFB boilers burning hard coals
pp. 272-272(1)
Author: Li Y.

Application of membrane technology for oxygen enrichment in coal-fired boiler
pp. 272-272(1)
Author: Fang S.

Babcock & Wilcox CFB boilers - design and experience
pp. 272-272(1)
Author: Belin E.

Co-firing of coal and feedlot biomass (FB) in a laboratory scale boiler burner
pp. 272-273(2)
Author: Annamalai K.

Design of a 12 MW tri-cogeneration system of gas, heat and power
pp. 273-273(1)
Author: Wang Q.

Enhanced mercury control for coal-fired utility boilers
pp. 273-273(1)
Authors: Kudlac G.A.; Amrhein G.T.

Experimental research on two-stage desulfurization technology in traveling grate boilers
pp. 273-273(1)
Author: Zhou J.

Heat recovery boiler for coal gasification
pp. 273-273(1)
Author: Yoshida K.

Modeling of thermal characteristics for a furnace of a 500 MW boiler fired with high-ash coal
pp. 273-273(1)
Author: Kouprianov V.I.

Numerical analysis of a protection technique for tube erosion in utility boilers
pp. 273-273(1)
Author: Fan J.R.

Optimised NH₃-injection in CFB-boilers
pp. 273-273(1)
Authors: Ljungdahl B.; Larfeldt J.

Performance test data from the first 23 MW_t ABFB boiler in Turkey
pp. 273-273(1)
Author: Oymak O.

Progress toward commercialization of wood/coal cofiring in stoker boilers in Pittsburgh
pp. 273-273(1)
Authors: Cobb J.T.; William W.

Reduction of chlorine deposition in FB boilers with aluminium-containing additives
pp. 273-274(2)
Author: Aho M.

Repowering lignite fuelled boiler plant for high efficiency
pp. 274-274(1)
Author: McIntosh M.J.

Study on fluidized region of particles using direct simulation method
pp. 274-274(1)
Author: Yuan Z.

Study on visualization simulation of 3-D combustion temperature profiles of large boiler furnace
pp. 274-274(1)
Author: Zhou H.

Survey of biomass cofiring experience in the US
pp. 274-274(1)
Authors: Battista J.J.; Hughes E.E.

The design and experiment of 25 t/h double circulating fluidized bed boiler
pp. 274-274(1)
Author: Wu Z.

The study on spray dryer absorber flue gas desulfurization for industrial boiler
pp. 274-274(1)
Authors: Wang F.; Lu M.

Treatment of brown coal for firing of boilers
pp. 274-274(1)
Author: Lenz U.

Use of steam-gas ejector for improvement of capacity and explosion safety of pulverization systems in thermal power plants
pp. 274-274(1)
Authors: Klochenko V.S.; Karamanyan A.K.

A CFD-based study of the mixing processes during reburning
pp. 274-275(2)
Authors: Zarnescu V.; Pisupati S.V.

A mathematical model of in-bed char combustion of Australian coals in PFBC
pp. 275-275(1)
Authors: Cui Y.; Stubington F.

Advanced mechanism of coal carbonization
pp. 275-275(1)
Author: Nomura M.

Analysis of softening and resolidification of single and mixed coals upon heating
pp. 275-275(1)
Author: Morita M.

Assessment of ash inventory and size distribution in fluidized bed coal combustors
pp. 275-275(1)
Author: Cammarota A.

Burning velocities of dimethyl ether and air
pp. 275-275(1)
Author: Daly C.A.

Characteristics of NO_x reduction in two staged combustion
pp. 275-275(1)
Author: Hahn W.

Coal topping in a fluidized bed system
pp. 275-275(1)
Author: Yao J.

Cofiring biomass with coal: issues for technology commercialization
pp. 275-276(2)
Author: Tillman D.A.

Combustion of pulverized coal and biomass
pp. 276-276(1)
Author: Williams A.

Combustion of Victorian and South Australian high moisture lignites in a circulating fluidized bed combustion pilot plant
pp. 276-276(1)
Author: Bhattacharva S.P.

Combustion optimization using MPV combustion diagnostic and optimization systems - application experience
pp. 276-276(1)
Author: Khesin M.

Combustion performance of biomass residue and purpose grown species
pp. 276-276(1)
Author: Dare P.

Coupling thermal deactivation with oxidation for predicting the combustion of a solid fuel
pp. 276-276(1)
Authors: Zolin A.; Dan-Johnsen K.

Development of coal flash pyrolysis process (first results of 100T/D pilot plant study)
pp. 276-276(1)
Author: Hashimoto S.

Effects of factors on char pressurized combustion rate
pp. 276-277(2)
Author: Lin S.

Experimental study of burning rate in hydrocarbon pool fires
pp. 277-277(1)
Author: Chatris J.M.

Ignition temperature of coal carbonizates
pp. 277-277(1)
Author: Karcz A.

In-bed char combustion of Australian black coals in pressurized fluidized bed combustion
pp. 277-277(1)
Authors: Cui Y.; Stubington J.F.

Influence of fuel characters on NO reduction in the process of coal reburning
pp. 277-277(1)
Author: Zhong B.

Interaction between coal-laden primary air and opposed jets in jet precombustion burner
pp. 277-277(1)
Author: Zhao Q.W.

Investigation on rapid pyrolysis of Taiheiyo coal
pp. 277-277(1)
Author: Zhang A.

Kinetic modelling of n-decane combustion and autoignition
pp. 277-278(2)
Authors: Bikas G.; Peters N.

Kinetics of combustion and gasification of Ukrainian high-ash coal in pressurized fluidized bed
pp. 278-278(1)
Authors: Korchevoy Y.; Maystrenko A.

Kinetics of crosslinking reaction during the pyrolysis of brown coal
pp. 278-278(1)
Authors: Mae K.; Miura K.

Mass spectrometric study of combustion of GAP- and ADN-based propellants
pp. 278-278(1)
Author: Kuibida L.V.

Mathematical modeling of Tonghae (Korea) circulating fluidized bed combustor (200 MWe)
pp. 278-278(1)
Author: Rhee K.S.

Measurements of minimum ignition energy by using laser sparks for hydrocarbon fuels in air: propane, dodecane, and jet-A fuel
pp. 278-278(1)
Author: Lee T.

Measures to prevent the spontaneous ignition of coal
pp. 278-278(1)
Authors: Taufer A.; Jasek P.

Method for removing deposits from combustion chambers during continual operation
pp. 278-278(1)
Author: Riedel E.

Physicochemical transformations of coal particles during pyrolysis and combustion
pp. 278-279(2)
Author: Alonso M.J.G.

Pilot-scale air toxics results for PCP/creosote-treated wood cofiring for pulverized coal combustion applications
pp. 279-279(1)
Author: Freeman M.

Prediction of the combustion behavior of blended coals in coal blending for power
pp. 279-279(1)
Author: Dai C.

Pyrolysis products from different biomasses: application to the thermal cracking of tar
pp. 279-279(1)
Author: Fagbemi L.

Research on key parameters in coal self-ignition
pp. 279-279(1)
Author: Guo X.

Spontaneous combustion mechanism of gangue in Jingang Coal Mine
pp. 279-279(1)
Author: Huang W.

Strengths of pressurized fluidized bed combustion filter cakes: their chemical causes at 750^oC and 950^oC
pp. 279-279(1)
Authors: Smith D.H.; Seshadri K.S.

Study of coal pyrolysis characteristics in N₂ and Ar atmosphere
pp. 279-279(1)
Author: Chang L.

Study on strengthening combustion and NO_x formation properties of rough-surfaced bluff-bodies
pp. 280-280(1)
Author: Ma X.

TG-FTIR analysis of biomass pyrolysis
pp. 280-280(1)
Author: Bassilakis R.

The characteristics of coal-char oxidation under high partial pressure of oxygen
pp. 280-280(1)
Author: Hu Y.Q.

The fluidized bed combustion of heavy liquid fuels
pp. 280-280(1)
Author: Anthony E.J.

The influence of moisture on particles and gas emission regularities in the combustion of lignite of Turkey
pp. 280-280(1)
Author: Oenal G.

The mass transfer coefficient for the combustion of pulverized carbon particles
pp. 280-280(1)
Author: Fortsch D.

Thermogravimetric study on hydropyrolysis and multi-stage hydropyrolysis of coal with and without catalyst
pp. 280-280(1)
Author: Wang N.

Utilization of high-sulfur coals in CFB
pp. 280-280(1)
Authors: Seeber J.; Scheffknecht G.

Vado Ligure - the demonstration of coal over coal reburn at utility scale plant
pp. 280-281(2)
Author: Ghiribelli L.

A fuel spray induced vortex ring
pp. 281-281(1)
Author: Sazhin S.S.

Combined cooling and heating using a gas engine in a supermarket
pp. 281-281(1)
Author: Maidment G.G.

Consequences of aero-engine deteriorations for military aircraft
pp. 281-281(1)
Author: Naeem M.

Development of low emission coal energy utilization system: producing of ash-free coal by solvent de-ashing
pp. 281-281(1)
Author: Okuyama N.

Gas turbines for coal gasification combined cycle service
pp. 281-281(1)
Author: Horazak D.

Primary energy efficiency of alternative powertrains in vehicles
pp. 281-281(1)
Author: Ahman M.

Recuperated gas turbine integrated with the PFBC combined cycle power plant
pp. 281-282(2)
Author: Chodkiewicz R.

Repair welding of cracked steam turbine blades using austenitic and martensitic stainless-steel consumables
pp. 282-282(1)
Author: Bhaduri A.K.

Research on high speed diesel engine using with UCMCWF
pp. 282-282(1)
Author: Zhang W.

Second-generation PFB plant performance with W501G gas turbine
pp. 282-282(1)
Author: Robertson A.

The gas turbine in a power plant with pressurized circulating fluidized-bed combustion
pp. 282-282(1)
Author: Stuhlmueller F.

A coal-firing oil heating furnace
pp. 282-282(1)
Author: Tang M.

An extended version of the countercurrent back-mixing model suitable for solid mixing in two dimensional fluidized beds
pp. 282-282(1)
Authors: Abanades J.C.; Grasa G.

Benefits of one-dimensional simulation of fluidized bed systems
pp. 282-282(1)
Authors: Hiller R.; Faulhaber S.

Blast furnace operation with pulverized coal injection at different technological conditions
pp. 283-283(1)
Author: Prego A.F.

Charging of ore and coke in blast furnace operation
pp. 283-283(1)
Authors: Isobe M.; Nagane T.

Coal char reactivity and structural evolution during combustion-factors influencing blast furnace pulverized coal injection operation
pp. 283-283(1)
Author: Lu L.

Evolution of blast furnace smelting and prospect for nonconventional metallurgy
pp. 283-283(1)
Author: Tovarovskii I.G.

Mathematical modelling of pressurized fluidized bed systems - simulation of a combined cycle power plant
pp. 283-283(1)
Author: Forster M.

Method for blowing coal powder into blast furnace
pp. 283-283(1)
Author: Murai R.

Method for charging center coke in Bell-less top blast furnace
pp. 283-283(1)
Author: Mori K.

Modelling of an ethanol-water distillation column with vapour recompression
pp. 283-283(1)
Author: Oliveria S.B.M.

Study on magnetically stabilized fluidized beds for coal separation
pp. 283-283(1)
Author: Fan M.

The effect of the number of tube rows on heat, mass and momentum transfer in flat-plate finned tube heat exchangers
pp. 283-283(1)
Author: Halici F.

The role of coal in the Romelt process for the liquid-phase reduction of iron
pp. 283-284(2)
Author: Romenets V.A.

Two-stage blowing of powdered coal into blast furnace for ironmaking
pp. 284-284(1)
Author: Shen F.

Glass with high transparency, their manufacture, and frits for their manufacture
pp. 284-284(1)
Authors: Sato T.; Ama N.

Recycling of coal washing refuse for the fabrication of clay-based refractory ceramic bricks
pp. 284-284(1)
Author: Sidrak F.

Collector selection for solar ejector cooling system
pp. 284-284(1)
Author: Huang B.J.

Development of a microchannel evaporator model for a CO₂ air-conditioning system
pp. 284-284(1)
Authors: Kim M.; Bullard C.W.

Effect of refrigerant charge on the performance of air conditioning systems
pp. 284-284(1)
Author: Goswami D.Y.

Energy storage comparison of sorption systems for cooling and refrigeration
pp. 284-284(1)
Authors: Mugnier D.; Goetz V.

Field study using the ground as a heat sink for the condensing unit of an air conditioner in Thailand
pp. 284-284(1)
Author: Khedari J.

Heating and cooling energy recovery for an HVAC system: economic analysis for the Italian climate
pp. 284-284(1)
Author: Palombo A.

Maximum exergy input rate from a hot stream in solar-driven refrigerators
pp. 285-285(1)
Author: Vargas J.V.C.

On blends R32/R134a and R32/R125: thermodynamic and heat transfer aspects
pp. 285-285(1)
Author: Stegou-Sagia A.

Pressure drop of HFC refrigerants inside evaporator and condenser coils as determined by CFD
pp. 285-285(1)
Author: Smith S.J.

The design and experimental verification of heat exchanger accumulators used in small commercially available air conditioning systems
pp. 285-285(1)
Authors: Meyer J.P.; Wood C.W.

The influence of street canyons on the cooling loads of buildings and the performance of air conditioning systems
pp. 285-285(1)
Author: Papadopoulos A.M.

The optimum performance of a solar-assisted combined absorption-vapor compression system for air conditioning and space heating
pp. 285-285(1)
Authors: Guktun S.; Deha E.R.

A performance comparison between an air-source and a ground-source reversible heat pump
pp. 285-285(1)
Authors: De Swardt C.A.; Meyer J.P.

On the steady-state modelling of a two-stage evaporator system
pp. 285-285(1)
Author: Hawlader M.N.A.

Optimal analysis on the cyclic performance of a class of chemical pumps
pp. 285-286(2)
Authors: Lin G.; Chen J.

A method for permanent CO₂ sequestration: supercritical CO₂ mineral carbonation
pp. 286-286(1)
Author: Dahlin D.C.

A time-series analysis of energy-related carbon emissions in Korea
pp. 286-286(1)
Authors: Choi K.; Ang B.W.

Air pollution effects on diameter increment of forest trees
pp. 286-286(1)
Authors: Tolunay D.; Makineci E.

An experimental investigation into the formation of polycyclic-aromatic hydrocarbons (PAH) from pyrolysis of biomass materials
pp. 286-286(1)
Author: McGrath T.

An overview of reactivity initiated accident behavior of rock-like fueled pressurized water reactors
pp. 286-286(1)
Authors: Akie H.; Nakamura T.

Basic models of methane release in underground mines
pp. 286-286(1)
Author: Gottfried J.

Binding carbon dioxide as carbonate minerals
pp. 286-287(2)
Author: Fauth D.J.

Black carbon emissions in China
pp. 287-287(1)
Author: Streets D.G.

Cement solidification of simulated off-gas condensates from vitrification of low-level nuclear waste solutions
pp. 287-287(1)
Author: Katz A.

Closing the circle: the potential role of fossil fuel resources in sequestration of carbon dioxide, a major atmospheric greenhouse gas
pp. 287-287(1)
Author: Burruss R.C.

Cooperative research on safety fundamentals of lithium batteries
pp. 287-287(1)
Author: Selman J.R.

CO₂ mitigation options and barriers to implementation in the Jordanian energy-sector
pp. 287-287(1)
Authors: Jaber J.O.; Probert S.D.

Dependence of alkali emissions in PFB combustion on coal composition
pp. 287-287(1)
Author: Gottwald U.

Developing an atomic-level understanding to enhance CO₂ mineral sequestration reaction processes via materials and reaction engineering
pp. 287-288(2)
Author: McKelvy M.J.

Dry flue gas scrubbing in heat and power stations: operating experience with medium- and large-size units
pp. 288-288(1)
Authors: Graf R.; Zimmer S.

Ecological reclamation of disturbed landform of large-scale opencast coal mine
pp. 288-288(1)
Authors: Sun T.; Bai Z.

Emission of harmful substances during combustion of heavy liquid fuels
pp. 288-288(1)
Author: Karcz H.

Enabling technologies for advanced solid-fueled power plants
pp. 288-288(1)
Author: Newby R.A.

Evaluation of innovative fossil cycles incorporating CO₂ removal
pp. 288-288(1)
Author: White J.S.

High-temperature sorbents to lower mercury control costs
pp. 288-288(1)
Author: Nelson S.

Impact on air environment due to a large coal-washery project of BCCL
pp. 288-288(1)
Authors: Ghose M.K.; Banerjee S.K.

Interactions of a tradable green certificate market with a tradable permits market
pp. 289-289(1)
Author: Morthorst P.E.

Lung tumor KRAS and TP53 mutations in nonsmokers reflect exposure to PAH-rich coal combustion emissions
pp. 289-289(1)
Author: DeMarini D.M.

Measures reducing the environmental impact of mining activity of the Katowice Coal Holding Co. with special consideration of a pilot plant for concentration of brines in the Wesola Coal Mine
pp. 289-289(1)
Author: Gajos S.

Mercury in coal of Guizhou China and its environmental impacts
pp. 289-289(1)
Author: Feng X.

Multi-lateral emission trading: lessons from interstate NO_x control in the United States
pp. 289-289(1)
Author: Farrell A.

Natural-gas-fueled cogeneration - an overview of the emission aspects
pp. 289-289(1)
Author: Klimstra J.

Neutronic and safety aspects of inert matrix fuel utilization in fast reactors for plutonium and minor actinides transmutation
pp. 289-290(2)
Author: Krivitski I.Y.

NO_x and SO₂ emissions from O₂/CO₂ recycle coal combustion
pp. 290-290(1)
Authors: Croiset E.; Thambimuthu K.V.

Polycyclic aromatic hydrocarbons from the pyrolysis of catechol (ortho-dihydroxybenzene), a model fuel representative of entities in tobacco, coal, and lignin
pp. 290-290(1)
Author: Wornat M.J.

Prediction of methane hazard in walls during coal mining
pp. 290-290(1)
Author: Fraczek R.

Progress in core and cermet fuel modelling to calculate severe accidents
pp. 290-290(1)
Author: Bonnet M.

Radiotoxicity hazard of inert matrix fuels after burning minor actinides in light water reactors
pp. 290-290(1)
Author: Shelley A.

Recovery and utilization of fly ash carbon
pp. 290-290(1)
Author: Maroto-Valer M.M.

Reducing NO_x emissions in tangentially-fired boilers-a new approach
pp. 290-290(1)
Author: Kokkinos A.

Safety characteristics of the multipurpose fast reactor (MPFR)
pp. 290-290(1)
Author: Netchaev A.

Study of effects of hydrodynamical modeling on the predicted nitrogen oxide concentration profiles in CFB combustors
pp. 290-291(2)
Author: Kallio S.

Sulfur in coal and its environmental impact from Yanzhou Mining District, China
pp. 291-291(1)
Author: Liu G.

Surface methane emission in the areas of abandoned mines as environmental and safety hazards
pp. 291-291(1)
Authors: Krzystolik P.; Kobiela Z.

The effect of low-NO_x burner operation on mercury emissions, speciation, and removal at a coal fired boiler equipped with wet FGD
pp. 291-291(1)
Author: DeVito M.S.

The effect of operating parameters on the selectivity of the carbon-NO reaction in an oxidizing atmosphere
pp. 291-291(1)
Author: Gupta H.

The effect of SO₂ pollution on forest in Turkey originated from coal consumption at east - central-south European countries
pp. 291-291(1)
Authors: Tokgoz N.; Kantarci M.D.

The environmental impact of manufacturing planar and tubular solid oxide fuel cells
pp. 291-291(1)
Author: Karakousis V.

The Knurow coking plant in Knurow, as a source of emission of heavy metals
pp. 291-291(1)
Author: Gorka P.

Ventilatory defect in coal workers with simple pneumoconiosis: early detection of functional abnormalities
pp. 291-292(2)
Author: Lin L.C.

Comprehensive utilization of coal and other hydrocarbon resources: an integrated approach
pp. 292-292(1)
Author: Song C.

Energy and the environment in Kazakhstan
pp. 292-292(1)
Authors: Dahl C.; Kuralbayeva K.

European and Japanese fuel economy initiatives: what they are, their prospects for success, their usefulness as a guide for US action
pp. 292-292(1)
Author: Plotkin S.E.

Injector and its operation method for coal hydrogasification apparatus
pp. 292-292(1)
Authors: Nomura K.; Shouji Y.

Materials for the power industry
pp. 292-292(1)
Authors: Eyre B.L.; Matthews J.R.

Public goods and private interests: understanding non-residential demand for green power
pp. 292-292(1)
Author: Wiser R.H.

Relation between coal pyrolysis reactivity and coke gasification reactivity
pp. 292-292(1)
Author: Feng J.

Supercritical pulverized coal firing for power generation in China
pp. 292-293(2)
Author: Zhou J.

The utilization of CFD-based modelling in cofiring: concept development and design
pp. 293-293(1)
Author: Jacobson T.

Use of a direct mercury analyser for the analysis of coal and coal combustion byproducts
pp. 293-293(1)
Author: Boylan H.M.

A monitoring method of a heating energy source efficiency
pp. 293-293(1)
Authors: Botsaris P.N.; Prebezanos S.

A study of sectoral energy consumption in Hong Kong (1984-97) with special emphasis on the household sector
pp. 293-293(1)
Author: Chow L.C.

Citizen versus consumer: challenges in the UK green power market
pp. 293-293(1)
Author: Batley S.L.

Development and study trend of utilization technology of energy resources
pp. 293-293(1)
Author: Uchida Y.

Development of porous solid reactant for thermal-energy storage and temperature upgrade using carbonation/decarbonation reaction
pp. 293-293(1)
Author: Aihara M.

Endogenising emission taxes A general equilibrium type optimisation model applied for Turkey
pp. 293-294(2)
Authors: Arikan Y.; Kumbaroglu G.

Energy use in commercial buildings in Hong Kong
pp. 294-294(1)
Authors: Yu P.C.H.; Chow W.K.

Korean energy demand in the new millennium: outlook and policy implications, 2000-2005
pp. 294-294(1)
Author: Kim S.H.

On the relationship between electrical energy consumption and climate factors in Lebanon: co-integration and error-correction models
pp. 294-294(1)
Authors: Badr E.A.; Nasr G.E.

Overview and comparison of long-term forecasting techniques for a fast developing utility: part I
pp. 294-294(1)
Author: Kandil M.S.

Participatory rural energy planning in India - a policy context
pp. 294-294(1)
Author: Neudoerffer R.C.

Strategic cogeneration - fresh horizons for the development of cogeneration in Brazil
pp. 294-294(1)
Authors: Szklo A.S.; Tolmasquim M.T.

The implementation of long-term forecasting strategies using a knowledge-based expert system: part II
pp. 294-294(1)
Author: Kandil M.S.

The Kentucky Pioneer Energy Project
pp. 294-294(1)
Author: Bailey R.A.

The uses of energy in the domestic sector
pp. 294-294(1)
Author: Andrade J.A.

A 'millennial phoenix' in northeastern Pennsylvania: Hazleton Shaft Corporation's state-of-the-art anthracite refuse processing facility rises from the ashes of the old shaft breaker
pp. 295-295(1)
Author: Inners J.D.

Coal composition effects on re-use options for pressurized circulating fluidized bed combustion ash
pp. 295-295(1)
Author: Bland A.E.

Compacting biomass waste materials into logs for cofiring with coal
pp. 295-295(1)
Authors: Li Y.; Liu H.

Improvement of power generation and cleaning of exhaust gas by utilizing waste material and coal
pp. 295-295(1)
Author: Kamei K.

Integration of advanced fine particle technologies for efficient carbon recovery from refuse ponds
pp. 295-295(1)
Author: Honaker R.Q.

Recycling of lithium ion cells and batteries
pp. 295-296(2)
Author: Lain M.J.

Strategies for vehicle waste-oil management: a case study
pp. 296-296(1)
Authors: El-Fadel M.; Khoury R.

Subject index
pp. 297-302(6)

Author index
pp. 303-304(2)