Fuel and Energy Abstracts

A method for estimation of elementary constituents in coal
pp. 166-166(1)
Authors: Sinha B.B.; Maharaj S.

Analysis of black substances, today and tomorrow. Physicochemical analysis method to realize reactivity of coals
pp. 166-166(1)
Author: Naruse I.

Bin discharge characteristics of crushed coal. An experimental study
pp. 166-166(1)
Author: Bhattacharya S.

Calculation of element distributions between inorganic and organic parts of coal
pp. 166-166(1)
Author: Klika Z.

Carboclastite--a new variety of coals
pp. 166-166(1)
Author: Mitronov D.V.

Coal properties and their influence on air activation
pp. 166-166(1)
Author: Kopp O.C.

Determination method of coal characteristics
pp. 166-166(1)
Author: Yashimura J.

Directions in the mining and use of Siberian anthracites
pp. 166-166(1)
Author: Sysoev V.L.

EPR studies of coal macerals. Influence of microwave frequency and thermal decomposition
pp. 166-166(1)
Author: Pilawa B.

EPR study of the nature of paramagnetism in coal
pp. 166-166(1)
Author: Shklyaev A.A.

Evaluation method of coal quality
pp. 166-166(1)
Author: Saito K.

Genesis of aromatic structures in organic matter of humic coals
pp. 166-166(1)
Authors: Evsaf'ev S.N.; Tuturina V.V.

Geochemical distribution of trace elements in coal: modelling and environmental aspects
pp. 166-166(1)
Author: Pires M.

Ignition behavior of pulverized coals
pp. 166-166(1)
Author: Chen J.C.

Improvement of solid waste slurries containing coal for fuels
pp. 167-167(1)
Authors: Kameda O.; Omiya Y.

Introduction to modern coal exploration technology-modern coal geology
pp. 167-167(1)
Author: Muraoka J.

Investigation of coal weathering
pp. 167-167(1)
Author: Ramon A.W.

Linkages between aromatic structures in the Argonne Premium Coal Samples
pp. 167-167(1)
Authors: Winans R.E.; Tomczyk N.A.

Macromolecular structure of brown coal in relationship to the degradability by microorganisms
pp. 167-167(1)
Authors: Schmiers H.; Kapsel R.

Macromolecular structure of coal
pp. 167-167(1)
Author: Imo M.

Mineral raw materials in the Orenburg region as a potential resource and prospects for its development
pp. 167-167(1)
Author: Potapenko B.P.

A new method to estimate hydrogen bondings in coal by utilizing FTIR and DSC
pp. 167-167(1)
Author: Miura K.

Optimal methods for monitoring of the ash and moisture contents of coal
pp. 167-167(1)
Author: Onishchenko A.M.

The organic geochemistry of coal: from plant materials to coal
pp. 167-167(1)
Authors: Hatcher P.G.; Clifford D.J.

Particle size dependence of coal volatile matter: is there a non-maceral-related effect?
pp. 167-167(1)
Author: Mathews J.P.

Possibility of the use of the international classification of coals in beds for evaluation of Russian coal fields
pp. 167-167(1)
Authors: Eremin I.V.; Bronovets T.M.

The prediction of coal properties using compressed infrared data from osculating polynomials
pp. 168-168(1)
Author: Alciaturi C.E.

Rank and petrographic characters of Gondwana (Lower Permian) coal of Peninsular India
pp. 168-168(1)
Author: Chakrabarti N.C.

Rank of coals of the Taimyr Basin
pp. 168-168(1)
Author: Vyalov V.I.

Rare earth elements and scandium in coals of the Kuznetsk Basin
pp. 168-168(1)
Author: Arbuzov S.I.

Recovery of coal from coal processing intermediate products
pp. 168-168(1)
Author: Blaszczynski S.

Reflectance analysis of coal feedstock: desired results and actual results. Comments. Reflectance analysis of coal feedstock
pp. 168-168(1)
Author: Zolotukhin Y.A.

Study on chemical composition and macromolecular structure of outburst zone coal
pp. 168-168(1)
Author: Xu L.

A study on hydrocarbon migration and accumulation in coal measures of Turpan-Hami basin
pp. 168-168(1)
Author: Li W.

Study on hydrogen bonding in swelling of coal
pp. 168-168(1)
Author: Chen C.

Study on the method of total carbon analysis of coal powder and two steps combustion
pp. 168-168(1)
Author: Kua K.T.

Supercritical extraction of brown coals
pp. 168-168(1)
Author: Deak G.

Testing procedure for the determination of coal-seam compressive strength in the laboratory
pp. 168-168(1)
Authors: Achanti V.B.; Khair A.W.

Trace element geochemistry of the Obed Mountain deposit coals, Alberta Canada
pp. 168-169(2)
Authors: Gentzis T.; Goodarzi F.

Understanding of the mechanism of coal transition into a plastic state. Part 2
pp. 169-169(1)
Author: Ulanovskii M.L.

The use of phenolic resins containing polynuclear aromatic moieties to model aspects of coal pyrolysis
pp. 169-169(1)
Author: McRae C.

Variable-temperature EPR studies of Illinois No. 6 coal treated with donor and acceptor molecules
pp. 169-169(1)
Author: Thompson R.L.

Weathering of solid fuels
pp. 169-169(1)
Author: Postrzednik S.

X-ray scattering analysis of the average polycyclic aromatic unit in Argonne Premium Coal 401
pp. 169-169(1)
Author: Wertz D.L.

Zeta potential of a subbituminous coal and its effect on particle agglomeration
pp. 169-169(1)
Authors: Lin Y.; Liu H.

Application of sonic energy to caustic cleaning of coals
pp. 169-169(1)
Author: Zaidi S.A.H.

Biodesulfurization of Turkish lignites. 2. Microbial desulfurization of Mengen lignite by the mesophilic microorganism Rhodococcus rhodochrous
pp. 169-169(1)
Author: Durusoy T.

Biomass in clean coal production
pp. 169-169(1)
Authors: Knudson C.L.; Pedersen M.P.

Coal desulfurization by mild pyrolysis in a dual-auger coal feeder
pp. 169-169(1)
Author: Lin L.

Collectorless flotation of coal with two-stage addition of pine oil
pp. 169-169(1)
Author: Dey S.

Desulfurization of Pittsburgh coal by microbial column flotation
pp. 170-170(1)
Authors: Ohmura N.; Saiki H.

Development of a selection criterion for process parameters in batch coal flotation
pp. 170-170(1)
Authors: Govindarajan B.; Rao T.C.

Dewatering of fine coal
pp. 170-170(1)
Authors: Ivatt S.; Shah C.

Dissolved mineral species precipitation during coal flotation
pp. 170-170(1)
Authors: Somasundaran P.; Liu D.

Effect of iron enrichment with GIC or FeCl₃ on the pore structure and reactivity of coking coal
pp. 170-170(1)
Author: Alibiniak A.

The effect of radiation to enhance the bioconversion of coal
pp. 170-170(1)
Author: Gazso L.G.

An evaluation of fine coal flotation at the Chaili Coal Washery
pp. 170-170(1)
Author: Zhang R.Z.

Evaluation of response of brown coal to selective oil agglomeration by zeta potential measurements of the agglomerates
pp. 170-170(1)
Author: Gurses A.

Experiment studies on dehydration of fine particle coal by cationic quaternary ammonium salt graft copolymer
pp. 170-170(1)
Author: Xia C.

Experimental studies on steam pressure filtration of coal concentrate filter cakes
pp. 170-170(1)
Authors: Gerl S.; Stahl W.

Fine coal dewatering using pH- and temperature-sensitive superabsorbent polymers
pp. 171-171(1)
Author: Dzinomwa G.P.T.

Fungal attack on coal: I. Modification of hard coal by fungi
pp. 171-171(1)
Author: Hofrichter M.

Heat treatment of coals in various solvents at temperatures as low as 175-300^oC
pp. 171-171(1)
Author: Imo M.

Hydrogenation of a brown coal pretreated with water-soluble nickel/molybdenum and cobalt/molybdenum catalysts
pp. 171-171(1)
Author: Hulston C.K.J.

-irradiation of coal and lignite: effect on extractability
pp. 171-171(1)
Author: Ram L.C.

Method and apparatus for thermal decomposition of coal
pp. 171-171(1)
Author: Ikeda Y.

Method for the dressing of lignite
pp. 171-171(1)
Authors: Klutz H.-J.; Block D.

Microbial ecology studies for the desulfurization of Spanish coals
pp. 171-171(1)
Author: Gomez F.

Microbiological desulfurization of column-packed coal
pp. 171-171(1)
Author: Moran A.

Modified approaches for high pressure filtration of fine clean coal
pp. 171-171(1)
Author: Yang J.

A novel dense medium separator for coarse coal cleaning
pp. 171-171(1)
Author: Yildirim I.

Pilot-scale studies using a hydrocyclone and froth flotation for the production of beneficiated coal fractions for improved coal liquefaction
pp. 171-172(2)
Author: Cloke M.

A preliminary investigation of dense-medium centrifugation for fine coal separations
pp. 172-172(1)
Author: Klima M.S.

The preparation and characterization of linear and cross-linked poly(fluorenyl)
pp. 172-172(1)
Authors: Hagaman E.W.; Lee S.-K.

Pretreatment of coal--challenges and opportunities
pp. 172-172(1)
Authors: Morris J.; Ivatt S.

Procedure, equipment, and presses for decreasing of water content in raw brown coal
pp. 172-172(1)
Author: Bielfeldt F.B.

QGS2020 type piano-wire probability screen-an important matching equipment in the coal dry beneficiation technique with air-dense medium fluidized bed
pp. 172-172(1)
Author: Zhao Y.

Removal of minerals from coals by alkali-acid treatment in the presence of assistants
pp. 172-172(1)
Author: Ding Y.

The role of cake structure in the dewatering of fine coal by filtration
pp. 172-172(1)
Authors: Ranj an S.; Hogg R.

Selective oil agglomeration of Lafia coal, Nigeria
pp. 172-172(1)
Author: Uwadiale G.G.O.O.

Single stage fine coal dewatering and reconstitution process
pp. 172-172(1)
Authors: Ding Y.; Wilson J.W.

The slurry-column coal beneficiation process
pp. 172-172(1)
Authors: Andrews G.F.; Noah K.S.

A study on coal blending for steam power station
pp. 173-173(1)
Authors: Zheng M.; Yao B.

Sulfur distribution in Illinois No. 6 coal subjected to different oxidation pre-treatments
pp. 173-173(1)
Author: Van Aelst J.

A test system to analyse the complex physiological states of coal solubilizing fungi
pp. 173-173(1)
Author: Holker U.

Theoretical analysis of schemes for complex coal processing
pp. 173-173(1)
Author: Anikeev V.

Theory and practice of coal dry beneficiation with air-dense medium fluidized bed
pp. 173-173(1)
Author: Chen Q.

Transformations of low rank coal by Phanerochaete chrysosporium and other wood-rot fungi
pp. 173-173(1)
Authors: Ralph J.P.; Catcheside D.E.A.

Upgrading of waste derived solid fuel by steam gasification
pp. 173-173(1)
Author: Braekman-Danheux C.

Waste pyritic coal as a raw material for energetic industry
pp. 173-173(1)
Author: Gasiorek J.

Fundamental studies on early detection of spontaneous combustion of coal using smell sensors
pp. 173-173(1)
Author: Ohga K.

Reduction of fugitive dust from coal stockpiles
pp. 173-173(1)
Author: King A.

The sensitive gas index for marking stages of coal spontaneous combustion and its application
pp. 173-173(1)
Author: Qi Y.

Study on the transportation characteristic of pulverized coal
pp. 174-174(1)
Author: Ma N.

Cogasification clean coal technology developments within Europe
pp. 174-174(1)
Author: Minchener A.J.

Fuel standards as building blocks of a quality policy
pp. 174-174(1)
Author: Liphard K.G.

Portfolio choice of government incentives: the case of commercialization of a new coal-based technology
pp. 174-174(1)
Author: Kocagil A.E.

The potential for India in the world coal export market
pp. 174-174(1)
Author: Watson W.D.

Prospects for Omani coal
pp. 174-174(1)
Authors: Al-Ismaily H.A.; Probert D.

Analysis of ways to improve methods for evaluation of coke quality
pp. 174-174(1)
Author: Vashyuchenko A.I.

Apparatus and method for feeding coal into coke oven
pp. 174-174(1)
Author: Hanauka K.

Change of the reactivity of cokes during weathering of gas-coking coal
pp. 174-174(1)
Author: Bratek W.

Characterization of the coke formed during oxylene isomerization over mordenites at various temperatures
pp. 174-174(1)
Author: Henriques C.A.

Coking method of coal
pp. 174-174(1)
Authors: Suyama S.; Kunimasa H.

Combustible carbonaceous compositions and method of manufacturing briquettes thereof
pp. 175-175(1)
Author: Landis C.R.

Comparative study of computer methods for automated measurement of the porosity of electrode cokes
pp. 175-175(1)
Authors: Kolowca M.; Dlugosz A.

Delayed coking: industrial and laboratory aspects
pp. 175-175(1)
Author: Rodrigeuz-Reinoso F.

Effect on coking behaviour of a special petroleum pitch by the addition of the heavy fraction of light diesel oil oligomers
pp. 175-175(1)
Author: Hu Z.

Fe-Si promoter for sulfur capture during coal briquette combustion
pp. 175-175(1)
Author: Xin L.

Grinding of a solid reductant used in production of anode material
pp. 175-175(1)
Author: Dorofeev Y.G.

Influence of throughput ratio on the coking behaviour of Shengli vacuum residue
pp. 175-175(1)
Author: Sun Z.

Manufacture of coal fuel briquets
pp. 175-175(1)
Author: Shimamura M.

Method for predicting the diameter of coke gains in chamber-type coke ovens
pp. 175-175(1)
Author: Fukada K.

Modelling of sulfur retention by limestone in coal briquette
pp. 175-175(1)
Authors: Chen C.; Kojima T.

Moisture control method of coking coal raw material
pp. 175-175(1)
Authors: Hosomi K.; Honma M.

New coke-manufacturing processes
pp. 175-175(1)
Authors: Rudyka V.I.; Malina V.P.

Pelletization studies of ultra-fine clean coal
pp. 176-176(1)
Authors: Mehta R.H.; Parekh B.K.

Prediction of the coking capacity of Donets Basin coals
pp. 176-176(1)
Author: Bronovets T.M.

Preparation and combustion behavior of cokes from fluidized-bed pyrolysis
pp. 176-176(1)
Author: Leick C.

Production and characterization of self-reducing briquet metallic charge
pp. 176-176(1)
Author: da Gama Bentes M.A.

Relationships between pitch composition and optical texture of cokes
pp. 176-176(1)
Author: Menendez R.

Some chemical and physico-mechanical properties of Nepalese coal tested for biobriquette production
pp. 176-176(1)
Author: Singh R.M.

Studies of coke behavior at high temperature
pp. 176-176(1)
Authors: Liu X.; Tang X.

Studies of the formation of nitrosamines in carbonization of bituminous coal
pp. 176-176(1)
Author: Hein M.

Study on coke produced from lignite by using conversion process with carbon monoxide and water
pp. 176-176(1)
Author: Wang J.

Alternative fuel
pp. 176-177(2)
Author: Paul S.F.

Characterization of oils by differential scanning calorimetry
pp. 177-177(1)
Author: Aboul-Gheit A.K.

Coated products and use thereof in oil fields
pp. 177-177(1)
Author: Collins I.R.

A criterion for ordering individuals in a composite core
pp. 177-177(1)
Author: Langaas K.

Detection of crude oil and its heavy part coking temperature and phenomena by thermal analysis
pp. 177-177(1)
Authors: Lin J.-S.; Hsiao H.-H.

Determination of coumarin in kerosene and A fuel oil by multivariate analysis
pp. 177-177(1)
Author: Mitsui T.

Evaluation method of hydrocarbon fuels
pp. 177-177(1)
Author: Ranson A.

Fluid distribution in kaolinite- or illite-bearing cores: cryo-SEM observations versus bulk measurements
pp. 177-177(1)
Authors: Durand C.; Rosenberg E.

Introduction to the revised Mesozoic stratigraphy and nomenclature for Yemen
pp. 177-177(1)
Author: Beydoun Z.R.

Kinetic model for cloud-point blending of diesel fuels
pp. 177-177(1)
Authors: Saiban S.; Brown T.C.

Low temperature properties of diesel fuel produced in Bulgaria
pp. 177-177(1)
Author: Alsakkaf M.

Main factors influencing the expulsion of oil derived from coal
pp. 177-177(1)
Authors: Zhao C.; Cheng K.

NMR and FIMS structural analysis of the oil obtained from the pyrolysis of Bemolanga tar-sand bitumen (Madagascar) according to a post combustion process
pp. 177-177(1)
Author: Rafenomanantsoa A.

A novel experimental apparatus for determination of three-phase relative permeabilities at reservoir conditions
pp. 177-178(2)
Author: Ebeltoft E.

Oleananes in oils and sediments: evidence of marine influence during early diagenesis?
pp. 178-178(1)
Author: Murray A.P.

Petroleum potential and oil-source correlation in the Great South and Canterbury basins
pp. 178-178(1)
Author: Killops S.D.

Prediction of bulk properties of Fischer-Tropsch derived liquids
pp. 178-178(1)
Authors: Marano J.J.; Holder G.D.

Relationship between inertinite in coal and accumulation/migration of oil from coal
pp. 178-178(1)
Authors: Chen Z.; Hu S.

Some practical applications of recent core analysis advances
pp. 178-178(1)
Author: Williams N.V.

Source and maturation of crude oils in northern and eastern Germany. An organic geochemical approach
pp. 178-178(1)
Author: Wehner H.

The structural characteristics and hydrocarbon accumulation in Turpan-Hami coal-bearing basin
pp. 178-178(1)
Author: Wu T.

Studies on the evaporation of crude oil and petroleum products: I. the relationship between evaporation rate and time
pp. 178-178(1)
Author: Fingas M.F.

Yields of oil products from thermochemical biomass conversion processes
pp. 178-178(1)
Author: Demirbas A.

Aspects of determining the process efficiency in petroleum refineries
pp. 178-178(1)
Authors: Perisic B.; Zarkic-Joksimovic N.

Benzene reduction in motor gasoline--the iso/sat process
pp. 179-179(1)
Authors: Krisko N.; Imre A.

Catalytic properties of supported cobalt catalysts or steam reforming of ethanol
pp. 179-179(1)
Author: Haga F.

500,000 tons/year delayed coking installation
pp. 179-179(1)
Author: Zhang W.

Don't rule out iron catalysts for Fischer-Tropsch synthesis
pp. 179-179(1)
Author: Xu L.

The effects of catalyst ageing and refreshing on gasoline reforming process
pp. 179-179(1)
Author: Selakovic O.V.

Energy management in fluidized catalytic cracking process
pp. 179-179(1)
Author: Ocic O.

Enhancement of thermal stability of jet fuels using alkylphenol additives
pp. 179-179(1)
Author: Alsakkaf M.

Fischer-Tropsch comes back
pp. 179-179(1)
Author: Parkinson G.

Hydrotreating of heavy distillate derived from Wandoan coal liquefaction
pp. 179-179(1)
Author: Sato Y.

Improvement of solid waste slurries for fuels
pp. 179-179(1)
Authors: Kameda O.; Omiya Y.

Influence of pulsed electromagnetic field on crude oil rheology
pp. 179-179(1)
Author: Secerov S.R.

Laboratory research on refining of straight-run diesel distillate by extraction with ethanol-water
pp. 179-179(1)
Authors: Tang X.; Xu R.

A lumping kinetics for modified FT reforming process. II. Experimental and kinetics parameters estimation
pp. 179-179(1)
Author: Liu Z.-W.

Manufacture of high-purity indene from tar-light oil
pp. 179-179(1)
Author: Sugiura K.

Medium severity hydrotreating and hydrocracking of Israeli shale oil--II. Testing of novel catalyst systems in a trickle bed reactor
pp. 179-179(1)
Author: Landau M.W.

Methodological aspects of expressing the efficiency of refinery power plant
pp. 180-180(1)
Authors: Popovic D.; Perisic R.

Oil pressure detection device
pp. 180-180(1)
Author: Komata N.

Platinum metal fuel additive for water-containing fuels
pp. 180-180(1)
Author: Peter-Hoblyn J.D.

Recycling of waste vegetable oils
pp. 180-180(1)
Author: Takehara A.

The Shell gasification technology offers clean solutions for refineries and utility companies
pp. 180-180(1)
Author: Vlaswinkel E.E.

Stabilization method of coal-water slurries
pp. 180-180(1)
Author: Kawaide M.

Treatment agent for high-viscosity oils
pp. 180-180(1)
Author: Okura H.

Trends in petrochemistry. Description of the PER+Mega Project
pp. 180-180(1)
Author: Crok M.

The use of coal liquefaction catalysts for coal/oil coprocessing and heavy oil upgrading
pp. 180-180(1)
Author: Cugini A.V.

Accounting for growth of total factor productivity as output with exhaustible resource rent: the Kuwaiti oil industry
pp. 180-180(1)
Authors: Al-Ebraheem Y.; Shebeb B.

Activities implemented jointly and the use of fuel alcohol in Brazil for abating CO₂ emissions
pp. 180-180(1)
Authors: Ribeiro S.K.; Rosa L.P.

The aggregate effects of reducing the motor fuels excise tax in the United States
pp. 181-181(1)
Authors: Uri N.D.; Boyd R.

The asymmetry of gasoline prices: fresh evidence from an error correction model for U.K. and U.S.A.
pp. 181-181(1)
Author: Eltony M.N.

Deregulation of the Japanese oil products market
pp. 181-181(1)
Authors: Clarke R.; Edwards T.H.

Determinants of fiscal adjustments to falling oil prices: evidence from the Middle East
pp. 181-181(1)
Authors: Nugent J.B.; Glezakos C.

Implications of output price risk and operating leverage for the evaluation of petroleum development projects
pp. 181-181(1)
Author: Salahor G.

Inward foreign direct investment, industrial development, and trade: the case of the Saudi petrochemical industry
pp. 181-181(1)
Author: Bardesi H.

The management of flexibility in the upstream petroleum industry
pp. 181-181(1)
Author: Laughton D.

The potential for use of modern asset pricing methods for upstream petroleum project evaluation: concluding remarks
pp. 181-181(1)
Author: Laughton D.G.

Use of ethanol fuel in the U.S.A.
pp. 181-181(1)
Author: Hsin-Hsing T.

On the use of modern asset pricing for comparing alternative royalty systems for petroleum development projects
pp. 181-181(1)
Author: Bradley P.G.

Advances in synthetic fuels for automobiles
pp. 181-181(1)
Author: Uchinuma K.

Application of model compounds in the study of coal liquefaction
pp. 181-181(1)
Authors: Ling K.; Shen J.

Catalytic cracking conversion of plastics to fuel oils
pp. 181-181(1)
Author: Oyoshi H.

Catalytic cracking of plastics and mixtures of plastics and organic materials such as paper and organic oils for production of fuel oil and diesel oil
pp. 182-182(1)
Authors: Goetzelmann W.; Hahn H.

Coal liquefaction method
pp. 182-182(1)
Author: Aihara Y.

Coal liquefaction method
pp. 182-182(1)
Author: Ikeda K.

Coal liquefaction method
pp. 182-182(1)
Author: Itonaga M.

Continuous manufacture of oils from waste plastics
pp. 182-182(1)
Author: Kuroki T.

Conversion of waste plastic to oil by simple conversion process/liquid-phase decomposition process--application of coal liquefaction technology
pp. 182-182(1)
Author: Kameyama M.

Coprocessing of polymeric waste with coal: reaction of polyethylene and coal model compounds
pp. 182-182(1)
Authors: De Witt M.J.; Broadbelt L.J.

Effect of preliminary treatment of cobalt catalysts on synthesis of hydrocarbons from CO and H₂
pp. 182-182(1)
Author: Lapidus A.L.

Emulsion fuel production method and apparatus for supply to an emulsion fuel combustion apparatus
pp. 182-182(1)
Author: Ishida G.

Environmentally acceptable and energy-efficient technology: Statoil's methanol plant on the Tjeldberg peninsula
pp. 182-182(1)
Author: Olsvik O.

Fischer-Tropsch process for conversion of synthesis gas with catalyst containing cobalt and additional elements
pp. 182-182(1)
Authors: Chaumette P.; Didillon B.

From natural gas to liquid hydrocarbons. Part 4. Production of diesel oil and wax by Fischer-Tropsch-synthesis fusing a nitrogen-rich synthesis gas. Investigations on a semi-technical scale
pp. 182-182(1)
Author: Jess A.

Function of hydrogenated solvent in the coal liquefaction system. II. The influence of heavy distillate and middle distillate in the coal liquefaction solvent
pp. 183-183(1)
Author: Hirano K.

Higher-alcohol synthesis reaction study. V. Effect of excess ZnO on catalyst performance
pp. 183-183(1)
Author: Minahan D.M.

Liquefaction behavior of Point of Ayr coal
pp. 183-183(1)
Author: Wang C.

Liquefaction method of coal
pp. 183-183(1)
Author: Kawabata M.

Liquefaction of brown coal in a mixture with oil shale under a pressure of 6 MPa
pp. 183-183(1)
Author: Yulin M.K.

Liquefaction of micro algae with iron catalyst
pp. 183-183(1)
Author: Suzuki T.

Low-pressure liquefaction of lignocellulosic materials in the melting salt bed
pp. 183-183(1)
Author: Taraban'ko V.E.

Manufacture of liquid coke substitutes--a promising way to process brown coals
pp. 183-183(1)
Author: Bol'shakov V.I.

Method of and means for producing combustible products from heavy fuel residue
pp. 183-183(1)
Author: Doran B.

Preparation of fuel products from coal distillates
pp. 183-183(1)
Author: Yulin M.K.

Residual oil, coal and water triplex synfuel
pp. 183-183(1)
Author: Guo D.

Resource conservation in methanol production
pp. 183-183(1)
Author: Stepanov A.V.

Simultaneous processing of solid wastes and low-grade coals
pp. 183-183(1)
Author: Katagiri K.

Supercritical water process and apparatus for making oils from plastic wastes
pp. 184-184(1)
Author: Matsubara K.

System for thermal decomposition of waste plastics for oil manufacture
pp. 184-184(1)
Author: Hama T.

Thermogravimetric analysis of the catalytic hydrogenation of a coal-derived liquid
pp. 184-184(1)
Author: Dalla Lana I.G.

Characteristics of gas adsorption of coal in an electromagnetic field
pp. 184-184(1)
Author: He X.

Cleaning of hot producer gas in a catalytic adiabatic packed bed reactor with periodic flow reversal
pp. 184-184(1)
Author: Van de Beld L.

Coal-formed gas potential of Yingjisu sag in Tarim basin
pp. 184-184(1)
Author: Li X.

Gas generator for continuous production of a combustible gas
pp. 184-184(1)
Author: Jakob H.

Hydrogen diffusion membrane in gas separation devices for hydrogen manufacture
pp. 184-184(1)
Authors: Doyle M.L.; Edwards N.

Hydrous pyrolysis of high-maturity Paleozoic coals and black shales from Central Europe and adjacent areas. Thermodynamic considerations
pp. 184-184(1)
Author: Everlien G.

Mechanisms of biologically-mediated methane evolution from black coal
pp. 184-184(1)
Author: Panow A.

Methane recovery from coal mine gases using carbonaceous adsorbents
pp. 184-184(1)
Author: Buczek B.

Modern atmogeochemical method of crude oil and natural gas deposits detection
pp. 184-184(1)
Author: Janku J.

New aspects on the origin of nitrogen in natural gas in northern Germany
pp. 185-185(1)
Author: Gerling P.

Occurrence and geological cause of formation for coal-bed gas or carboniferous Permian in the eastern margin of Ordos basin
pp. 185-185(1)
Author: Zhang S.

Operation of reactor for steam reforming of methanol in hydrogen production
pp. 185-185(1)
Author: Wiesheu N.

Process for the preparation of ammonia from synthesis gas
pp. 185-185(1)
Authors: Udengaard N.; Skaanderup-Larsen J.

Rapid assessment of thermally coupled side columns
pp. 185-185(1)
Author: Finn A.J.

Reduction of spalling in mixed metal oxide desulfurization sorbents by addition of a large promoter metal oxide
pp. 185-185(1)
Author: Poston J.A.

Rotary reactor with tubular chamber array suitable for desulfurizing treatment of hot gas
pp. 185-185(1)
Author: Bakker W.

Study on adsorptive removal of small amount of carbon monoxide from ammonia synthesis gas
pp. 185-185(1)
Author: Ju S.

Test results of gasification and hot gas clean-up technologies with heavy oil
pp. 185-185(1)
Author: Shimojo M.

Liquid CO₂-sand fracturing: 'the dry frac'
pp. 185-185(1)
Author: Arnold D.L.

Deregulation and natural gas trade relationships: lessons from the Alberta-California experience
pp. 185-185(1)
Author: Wilson P.I.

Abatement of carbon dioxide in combined-cycle power plants with integrated coal gasification
pp. 185-186(2)
Author: Brand V.

The air blown gasification cycle
pp. 186-186(1)
Author: Dawes S.G.

Black liquor recovery by pressurized, oxygen-blown gasification
pp. 186-186(1)
Author: Lorson H.

Broadened pulse-step change-isotopic sharp pulse analysis of the mechanism of methane partial oxidation to synthesis gas
pp. 186-186(1)
Authors: Hu Y.H.; Ruckenstein E.

Catalytic gasification of coal for the production of fuel cell feedstock
pp. 186-186(1)
Author: Timpe R.C.

CO hydrogenation over nanometer spinel-type Co/Mn complex oxides prepared by sol-gel method
pp. 186-186(1)
Author: Liang Q.

Co-gasification of biomass and coal in a pressurized fluidized bed gasifier
pp. 186-186(1)
Authors: Andries J.; Hein K.R.G.

Coal gasification apparatus, coal gasification method and integrated coal gasification combined-cycle power generation system
pp. 186-186(1)
Author: Morihara A.

Development of coking-resistant Ni-based catalyst for partial oxidation and CO₂-reforming of methane to syngas
pp. 186-186(1)
Author: Chen P.

Effect of fluorine on the gasification rate of liquid boron oxide droplets
pp. 186-186(1)
Author: Yetter R.A.

Electrochemical methane oxidation to syngas on the Pt electrode in a cell with the solid oxygen-conducting electrolyte
pp. 187-187(1)
Author: Gal'vita V.V.

Experimental and modelling investigation of coal gasification in a fluidized bed reactor
pp. 187-187(1)
Author: Cui L.

Formation and removal of biomass-derived contaminants in fluidized-bed gasification processes
pp. 187-187(1)
Author: Kurkela E.

Gasification apparatus
pp. 187-187(1)
Author: Sawada M.

Gasification of coal from the Ovdogkhudag field of Mongolia
pp. 187-187(1)
Author: Gladun T.I.

Hydrogen production from lignocellulosic materials by steam gasification using a reduced nickel catalyst
pp. 187-187(1)
Author: Minowa T.

In situ infrared spectral studies of Rh/TPPTS and Rh/PPh₃ in synthesis gas
pp. 187-187(1)
Author: Zheng X.

Integrated gasification combined cycle based on pressurized fluidized bed gasification
pp. 187-187(1)
Authors: Salo K.; Patel J.G.

Integrated system for coal gasification combined with power generation
pp. 187-187(1)
Author: Abe T.

Laboratory estimation of input parameters for the simulation of long-term gas production from coal
pp. 187-187(1)
Author: Harpalani S.

Manufacture of fuel gas by gasification and thermal decomposition of solid gasification residue
pp. 187-187(1)
Author: Brandl A.

Manufacture of synthesis gas from wood and/or biomass
pp. 187-187(1)
Authors: Heidrich R.; Thielen W.

Mathematical modelling of a fluidized bed straw gasifier: part II--model sensitivity
pp. 187-187(1)
Author: Ergudenler A.

Mathematical modelling of a fluidized bed straw gasifier: part III--model verification
pp. 187-188(2)
Author: Ergudenler A.

Method and apparatus for gasification of low calorific fuels, such as biomass
pp. 188-188(1)

Method and system for producing fuel from a heavy hydrocarbon feedstock
pp. 188-188(1)
Author: Bauer A.M.

Molten metal bath gasifier for production of pig iron from iron sponge
pp. 188-188(1)
Author: Zschetzsche A.

Multifunctional heat recovery-type coal gasification systems
pp. 188-188(1)
Author: Naganuma Y.

New approach to application of classic methods of physicochemical kinetics to analysis of efficiency of plasma technology for coal gasification
pp. 188-188(1)
Authors: Karpenko E.I.; Devyatov B.N.

New type of binder for coal for gasification
pp. 188-188(1)
Authors: Qin J.; Li S.

Numerical analysis of transport phenomena in packed-bed-type coke gasifiers
pp. 188-188(1)
Author: Nogami H.

Oxygen blowing in integrated system for coal gasification combined with power generation
pp. 188-188(1)
Author: Abe T.

Partial oxidation of methane to synthesis gas on a Rh/TiO₂ catalyst in a fast flow porous membrane reactor
pp. 188-188(1)
Author: Alibrando M.

Preparation of municipal refuse for fixed-bed gasification
pp. 188-188(1)
Author: Rabe W.

Process and apparatus for production of mixed combustion gas
pp. 188-188(1)
Authors: Prokop L.; Kohut K.

Production of hydrogen from biomass by catalytic steam reforming of fast pyrolysis oils
pp. 188-188(1)
Author: Wang D.

Production of synthesis gas from hydrocarbon feedstock by reforming using Feitknecht catalysts
pp. 188-189(2)
Author: Scott S.B.J.

Promising steam--as installations with coal gasification for environmentally acceptable power engineering
pp. 189-189(1)
Author: Ol'khovskii G.G.

Pyrolysis of maize, sunflower, grape and tobacco residues
pp. 189-189(1)
Author: Encinar J.M.

Reaction retort for production of endo-gas
pp. 189-189(1)
Authors: Roth B.F.; Kohlmeyer T.F.

Reduction on synthesis gas costs by decrease of steam/carbon and oxygen/carbon ratios in the feedstock
pp. 189-189(1)
Authors: Basini L.; Piovesan L.

Research on steam gas co-generation technology
pp. 189-189(1)
Author: Wang Q.

Simulation modelling of a fluidized-bed coal gasifier or a new topping cycle system
pp. 189-189(1)
Author: Piao G.-L.

Slag-tap coal gasification reactor
pp. 189-189(1)
Author: Tanaka S.

Study on mechanism for deactivation of Ni--based catalysts for CH₄-CO₂ reforming to syngas
pp. 189-189(1)
Author: Chen P.

Activated carbon made from coal slurry and its applications
pp. 189-189(1)
Author: Zhang Z.

Anhydrite-type binders
pp. 189-189(1)
Author: Menzel T.

Characterization of activated carbons from waste materials by adsorption from aqueous solutions
pp. 189-189(1)
Author: Laszlo K.

Chromatographic-mass-spectrometric study of electrode-grade petroleum pitches
pp. 189-189(1)
Author: Gimaev R.N.

Coal mining waste as a structural material in Polish civil and water engineering
pp. 190-190(1)
Author: Gryczrnanski M.

Diffusion of oxygen into pitch
pp. 190-190(1)
Authors: Singer L.S.; Mitchell S.

Economic detoxification of contaminated fly-ash by energy efficient thermal processing
pp. 190-190(1)
Author: Lee P.H.

Effect of calcination on the texture and properties of anthracite calcination products
pp. 190-190(1)
Authors: Wajzer L.; Gerus-Piasecka I.

Effect of chemical modification on reductive and sorptive properties of chars obtained by coal hydropyrolysis
pp. 190-190(1)
Author: Stanczyk K.

Effect of heating rate on properties of produced char
pp. 190-190(1)
Author: Takahashi H.

Effect of pore size on adsorption of hydrocarbons in phenolic-based activated carbon fibers
pp. 190-190(1)
Author: Mangun C.L.

Effects of ageing and seeding on the formation of zeolite Y from coal fly ash
pp. 190-190(1)
Author: Zhao X.S.

Efficient separation of polycyclic aromatics from coal tar
pp. 190-190(1)
Author: Zong Z.

Evaluation of coal ashes for use in mortar-concrete
pp. 190-190(1)
Author: Shirasaka M.

An experimental analysis of the cement concrete mixed with coal ash
pp. 190-190(1)
Author: Zhao Y.

Fly-ash blended cement activated by a strong base
pp. 190-190(1)
Author: Katz A.

Gypsum. A building material from coal power stations
pp. 190-190(1)
Author: Hauschild G.

Improving lightweight concrete with bottom ash
pp. 191-191(1)
Author: Nisnevich M.

Injection molding of thermoplastics. Anthracite powder as filler
pp. 191-191(1)
Authors: Hupfer B.; Kretzschmar B.

Kinetics of hydroprocessing of coal-derived vacuum residues
pp. 191-191(1)
Author: Wang S.

Manufacture of artificial aggregate from fly ash
pp. 191-191(1)
Author: Kawamoto K.

Manufacture of building blocks from coal combustion waste and related products
pp. 191-191(1)
Author: Weyand T.E.

Manufacture of high-quality isotropic graphite from solvent-soluble fraction of coal powder
pp. 191-191(1)
Author: Stiller A.H.

Manufacture of high-strength lightweight aggregates
pp. 191-191(1)
Author: Ivkovich D.P.

Method for solidification of incinerator ashes to use in concrete composition
pp. 191-191(1)
Authors: Tsutsui T.; Tsutsui M.

Modification method of coal ash and application of modified coal ash
pp. 191-191(1)
Author: Maeda K.

Non-destructive evaluation of fly ash-rich high-performance concrete (HPC)
pp. 191-191(1)
Authors: Hwang C.L.; Jann I.Y.

One powder-type polymer cement compositions for semi-resilient pavements
pp. 191-191(1)
Author: Anazawa M.

The oxidative reactivity of coal chars in relation to their structure
pp. 191-191(1)
Author: Chan M.-L.

Phenol-formaldehyde resin substitutes from biomass tars
pp. 191-192(2)
Author: Himmelblau D.A.

Phenolic asphalt blends
pp. 192-192(1)
Author: Kluttz R.Q.

Plant uptake of selenium, arsenic and molybdenum from soil treated with coal combustion byproducts
pp. 192-192(1)
Authors: Codling E.E.; Wright R.J.

Preliminary experiments on the characteristics and potential uses of coal fly ash from Israel
pp. 192-192(1)
Author: Foner H.A.

Preparation and evaluation of coal extracts as precursors for carbon and graphite products
pp. 192-192(1)
Author: Zondlo J.W.

Preparation of mesocarbon microbeads by dispersing mesophase pitch in isotropic pitches
pp. 192-192(1)
Author: Korai Y.

Properties of cement containing German lignite fly ashes
pp. 192-192(1)
Author: Dietz S.

Pyrolysis of degradation products from bituminous coal and characterization of tars and coke in view of parent coal structure and pyrolysis behavior
pp. 192-192(1)
Author: Liu Y.

Pyrolyzable composition for preparing boron-containing polyaromatic mesophase, polyaromatic mesophase pitch, and carbon products by liquid-phase pyrolysis at 350-1000^o
pp. 192-192(1)
Author: Huettinger K.J.

Results of laboratory and industrial tests of pitch coke in the manufacture of carbon structural materials
pp. 192-192(1)
Author: Beilma N.Y.

Strength and weathering characteristics of concrete using coal refuse as a coarse aggregate substitute
pp. 192-192(1)
Author: Patrick C.

Structure and physicomechanical properties of polymer systems filled with mechanically activated peat
pp. 192-192(1)
Authors: Terent'ev A.A.; Semenyuk I.V.

A study of graphitizing coal by X-ray diffraction
pp. 192-192(1)
Authors: Podder J.; Hossain T.

A study on time behavior of fly-ash blended cement products
pp. 192-193(2)
Author: Krizan D.

Subbituminous fly ash-based blended hydraulic cement compositions
pp. 193-193(1)
Author: Styron R.W.

Synthesis of zeolite ZSM-35 from coal gangue
pp. 193-193(1)
Author: Feng F.

System of utilization of coal ash for cement admixtures and concrete aggregate raw materials
pp. 193-193(1)
Author: Takekawa T.

Use of coal-beneficiation wastes in firing of cement clinker
pp. 193-193(1)
Author: Babushkin V.I.

Use of fly ash or silica fume to increase the resistance of concrete to feed acids
pp. 193-193(1)
Author: De Belie N.

Utilization of optionally classified ashes from coal-fired power plant steam boilers
pp. 193-193(1)
Authors: Kirchen G.; Lehrke J.

Conceptual design of a high temperature power reactor cooled and moderated by supercritical light water
pp. 193-193(1)
Author: Dobashi K.

Evaluations of radiation properties of gas media used in nuclear-pumped lasers
pp. 193-193(1)
Author: Lukashin G.M.

Nodal neutron kinetics model based on nonlinear iteration procedure for LWR analysis
pp. 193-193(1)
Authors: Zimin V.G.; Ninokata H.

Quick and reliable estimation of power distribution in a PHWR by ANN
pp. 193-193(1)
Author: Dubey B.P.

Nuclear power in the global energy-environmental system
pp. 194-194(1)
Author: Yamaji K.

The strategies of abating emission of CO₂ and nuclear energy development in China
pp. 194-194(1)
Authors: Fang D.; Li H.

An adaptive neural network approach for the estimation of power system frequency
pp. 194-194(1)
Author: Dash P.K.

Anatomy of power system disturbances: importance sampling
pp. 194-194(1)
Author: Thorp J.S.

Anodes for secondary lithium batteries
pp. 194-194(1)
Author: Kojima Y.

Application of grey linear programming to short-term hydro scheduling
pp. 194-194(1)
Author: Liang R.-H.

Aspects of design optimization for multiple tooth per stator pole switched reluctance motors
pp. 194-194(1)
Authors: Faiz J.; Finch J.W.

Dynamic analysis of substation busbar structures
pp. 194-194(1)
Authors: Budinich M.D.; Trahan R.E.

An efficient method for pumped-storage planning and evaluation
pp. 194-194(1)
Authors: Yen M.; Zhang S.

An enhanced Hopfield model for economic dispatch considering prohibited zones
pp. 194-194(1)
Authors: Su C.-T.; Chiou G.-J.

A flexible ac transmission system (FACTS) for balancing arc furnace loads
pp. 194-195(2)
Author: El-Sadek M.Z.

Fuzzy logic based voltage control for a synchronous generator
pp. 195-195(1)
Author: Ching-Tzong S.

Generator maintenance scheduling: a fuzzy system approach with genetic enhancement
pp. 195-195(1)
Author: Huang S.-J.

Kinetic analysis of capacity fade in lithium/coke half-cells
pp. 195-195(1)
Authors: Avery N.R.; Black K.J.

Modelling of multimachine transients during unbalanced power system disturbances
pp. 195-195(1)
Author: Akpinar E.

Non-aqueous secondary battery with anode using coke
pp. 195-195(1)
Author: Kousaka K.

Nonaqueous electrolyte secondary battery having coke anode for high current efficiency
pp. 195-195(1)
Author: Miyasaka J.

A novel approach to large scale system load flows Newton-Raphson method using hybrid bus
pp. 195-195(1)
Authors: Mary Raja Slochanal S.; Mohanram K.R.

Optimization and learning of load restoration strategies
pp. 195-195(1)
Author: Kostic T.

Secondary nonaqueous batteries using coke anodes
pp. 195-195(1)
Author: Miyasaka K.

Secondary nonaqueous electrolyte batteries having anodes of lithium ion-intercalatable carbon materials
pp. 195-195(1)
Author: Hayami M.

Secondary nonaqueous electrolyte batteries having anodes of lithium ion-intercalatable carbon materials
pp. 195-195(1)
Author: Fujiwara A.

Secondary nonaqueous electrolyte batteries with carbonaceous anodes
pp. 195-195(1)
Authors: Inoue T.; Osawa T.

Secondary organic electrolyte lithium batteries
pp. 195-195(1)
Author: Uenae K.

Sensitivities of multi-area reliability indices with respect to variations of equipment failure and repair rates--an analytical approach
pp. 195-196(2)
Author: Melo A.C.G.

Stand alone induction generators
pp. 196-196(1)
Author: Levy D.

Studies on VIPI based control methods for improving voltage stability
pp. 196-196(1)
Author: Nanba M.

Unit commitment with voltage constraints
pp. 196-196(1)
Authors: Ma H.; Shahidehpour S.M.

Use of pollution monitors with a neural network to predict insulator flashover
pp. 196-196(1)
Author: Cline P.

Barriers to the adoption of efficient electricity technologies: a case study of India
pp. 196-196(1)
Authors: Reddy B.S.; Shrestha R.M.

Climatic and economic influences on residential electricity consumption
pp. 196-196(1)
Author: Lam J.C.

Cost-benefit analysis on IRPIDSM application--a case study in Shanghai
pp. 196-196(1)
Author: Deshun L.

A critical review of deregulated foreign electric utility markets
pp. 196-196(1)
Authors: Walker C.D.; Lough W.T.

Falling generation costs, environmental externalities and the economics of electricity conservation
pp. 196-196(1)
Author: Parfomak P.W.

Loyalty or competition? A comparative analysis of Norwegian and Swedish electricity distributors' adaptation to market reform
pp. 196-196(1)
Authors: Midttun A.; Summerton J.

Optimal distribution network expansion planning under uncertainty by evolutionary decision convergence
pp. 196-196(1)
Author: Carvalho P.M.S.

Probabilistic ranking of large scale transmission projects
pp. 197-197(1)
Author: Tinnium K.

Recent development in open systems for EMS/SCADA
pp. 197-197(1)
Author: Kokai Y.

Substituting natural gas heating for electric heating: assessment of the energy and environmental effects in Ontario
pp. 197-197(1)
Author: Rosen M.A.

Transmission capacity in power networks
pp. 197-197(1)
Author: Ilic M.

Two-area power system costing by the cumulant method using available capacity distribution
pp. 197-197(1)
Author: Li Y.Z.

Variable costs of electricity generation: effects of new-source bias
pp. 197-197(1)
Author: Stanton T.J.

Anaerobic digestion of biomass for methane production: a review
pp. 197-197(1)
Author: Nallathambi Gunaseelan V.

Analytical characterization of primary products of biomass liquid pyrolysis in tetralin
pp. 197-197(1)
Author: Altunbulduk T.

Biomass residues from palm oil mills in Thailand: an overview on quantity and potential usage
pp. 197-197(1)
Authors: Prasertsan S.; Prasertsan P.

Carbohydrate biofuels. II. The need and the potential for root-fuel in the Navajo nation
pp. 197-197(1)
Author: Shultz E.B.

Chemistry of tar formation and maturation in the thermochemical conversion of biomass
pp. 197-198(2)
Authors: Evans R.J.; Milne T.A.

Co-combustion of biomass pretreated in a fluid bed pyrolysis unit
pp. 198-198(1)
Author: Hansen M.W.

A comment on the optimal sizing of a biomass utilization facility under constant and variable cost scaling
pp. 198-198(1)
Author: Jenkins B.M.

Comparison of five rural, wood-burning cooking devices: efficiencies and emissions
pp. 198-198(1)
Authors: Ballard-Tremeer G.; Jawurek H.H.

Compositional analysis of biomass feedstocks by near infrared reflectance spectroscopy
pp. 198-198(1)
Author: Sanderson M.A.

Cork powder waste: an overview
pp. 198-198(1)
Author: Gil L.

Energy, exergy and emergy analysis of using straw as fuel in district heating plants
pp. 198-198(1)
Author: Nilsson D.

Estimating the net energy value of corn-ethanol
pp. 198-198(1)
Author: Shapouri H.

Ethanol production from biomass: analysis of process efficiency and sustainability
pp. 198-198(1)
Authors: Bastianoni S.; Marchettini N.

Harvest management effects on quantity and quality of erianthus plant morphological components
pp. 198-198(1)
Author: Mislevy P.

Higher heating values for pellets made from short rotation biomass of hardwood species
pp. 198-199(2)
Author: Chow P.

IISc-DASAG biomass gasifiers: development, technology, experience and economics
pp. 199-199(1)
Author: Shara H.N.

Influence of calcination and reduction conditions on the catalyst performance in the pyrolysis process of biomass
pp. 199-199(1)
Author: Garcia L.

Maximising the production of fuelwood in different silvicultural systems
pp. 199-199(1)
Author: Gamborg C.

Modelling biomass pyrolysis in combustion
pp. 199-199(1)
Author: Chen Y.

Phenomenological models of cellulose pyrolysis
pp. 199-199(1)
Author: Green A.B.S.

Power production based on biofuels
pp. 199-199(1)
Authors: Nielson L.; Nielsen C.

Pyrolysis of two agricultural residues: olive and grape bagasse. Influence of particle size and temperature
pp. 199-199(1)
Author: Encinar J.M.

Rheological studies on a slurry biofuel to aid in evaluating its suitability as a fuel
pp. 199-199(1)
Authors: Natarajan V.P.; Suppes G.J.

Stabilisation of biofuel ashes for recycling to forest soil
pp. 199-199(1)
Authors: Steenari B.-M.; Lindqvist O.

Sulfur-deactivated steam reforming of gasified biomass
pp. 200-200(1)
Authors: Koningen J.; Sjoestroem K.

Techno-economic evaluations of a generic wood-to-ethanol process: effect of increased cellulose yields and enzyme recycle
pp. 200-200(1)
Author: Gregg D.J.

Thermochemical liquefaction of biomass wastes and unused biomass
pp. 200-200(1)
Authors: Minowa T.; Ogi T.

Geothermal chemistry thermodynamics: the WatchWorks program for MS-Windows
pp. 200-200(1)
Author: Klein C.W.

Thermal investigation in S. Pedro do Sul low enthalpy geothermal field (Portugal)
pp. 200-200(1)
Author: Correia A.

On the air flow and radiation transfer through partly covered external building openings
pp. 200-200(1)
Author: Tsangrassoulis A.

A carbonaceous thin film made by CVD and its application for a carbon/n-type silicon (C/n-Si) photovoltaic cell
pp. 200-200(1)
Author: Yu H.A.

Combustor/emitter design tool for a thermophotovoltaic energy converter
pp. 200-200(1)
Authors: Lindler K.W.; Harper M.J.

Dependence of diffuse light blocking on the ground cover ratio for stationary PV arrays
pp. 200-200(1)
Author: Van Schalkwijk M.

Effect of energy extraction on solar pond performance
pp. 200-201(2)
Authors: Al-Jamal K.; Khashan G.K.

Evaluation of parameters for anodic polarisation curve from the experimentally measured U-I dependence for an electrochemical photovoltaic regenerative solar cell
pp. 201-201(1)
Author: Rouar I.

Experimental and theoretical performance of a demonstration solar chimney model--part I: mathematical model development
pp. 201-201(1)
Authors: Pasumarthi N.; Sherif S.A.

Improved fill-factor for the double-sided buried-contact bifacial silicon solar cell
pp. 201-201(1)
Author: Ghozati S.B.

In-situ Kelvin probe and ellipsometry study of the doping of a-Si : H and a-SiC : H layers: correlation with solar cell parameters
pp. 201-201(1)
Author: Hadjadj A.

Investigation of an inexpensive solar collector storage system
pp. 201-201(1)
Author: Hamdan M.A.

Photothermal radiometry on nickel (pigmented aluminium oxide) selective solar absorbing surface coatings
pp. 201-201(1)
Author: Othonos A.

Photovoltaic properties of WSe₂ single-crystals studied by photoelectron spectroscopy
pp. 201-201(1)
Author: Klein A.

Short-term thermal performance of a built-in solar storage for frost prevention in a greenhouse
pp. 201-201(1)
Author: Kurklu A.

Solar radiation on tilted south oriented surfaces: validation of transfer-models
pp. 201-201(1)
Author: Behr H.D.

Transient method for testing flat-plate solar collectors
pp. 201-201(1)
Author: Amer E.H.

One step ahead adaptive control technique for wind systems
pp. 201-202(2)
Author: Dadone A.

Performance analysis of a small wind powered reverse osmosis plant
pp. 202-202(1)
Author: Infield D.

Production costing and economic analysis of power systems containing wind energy conversion systems
pp. 202-202(1)
Author: Tripathy S.C.

Simultaneous frequency and voltage control of wind-diesel power systems using energy storage
pp. 202-202(1)
Author: Mufti M.-U.-D.

Socio-economic assessment of wind power--lessons from Denmark
pp. 202-202(1)
Authors: Munksgaard J.; Larsen A.

Providing low-temperature heat with renewable energies. An energy economical comparison
pp. 202-202(1)
Authors: Lux R.; Kaltschmitt M.

System for utilising volatile air pollutants as fuel
pp. 202-202(1)
Authors: Kalinowski C.; Romanski T.

Use of sewage sludge energy in Swarzewo
pp. 202-202(1)
Author: Ostejski A.

Apparatus for dust-charged wet-type desulfurization of coal-fired boiler flue gases
pp. 202-202(1)
Author: Yokosuka T.

Ash behavior in a CFB boiler during combustion of coal, peat or wood
pp. 202-202(1)
Author: Skrifvars B.-J.

Case study of the conversion of tangential- and wall-fired units to low-NO_x combustion: impact on fly ash quality
pp. 202-202(1)
Author: Hower J.C.

Cofiring wood waste and coal in cyclone boilers: test results and prospectus
pp. 202-203(2)
Author: Tilman D.

Combustion technology for low-volatile coal in wall firing boilers
pp. 203-203(1)
Author: Kiga T.

Corrosion in ultra supercritical boilers for straw combustion
pp. 203-203(1)
Authors: Henriksen N.; Larsen O.H.

Dioxins formation in salt-laden power boilers: a mass balance
pp. 203-203(1)
Author: Luthe C.

The effect of coal chlorine and sulfur contents on high temperature corrosion in an AFBC system
pp. 203-203(1)
Author: Xie W.

Effect of coal chlorine on the fireside corrosion of boiler furnace wall and superheater/reheater tubing
pp. 203-203(1)
Authors: James P.J.; Pinder L.W.

Fireside corrosion testing of candidate superheater tube alloys, coatings, and claddings--phase II
pp. 203-203(1)
Authors: Blough J.L.; Stanko G.J.

First year of operation of Provence SOPROLIF 250 MW CFB boiler
pp. 203-203(1)
Author: Levy D.

Flue gas desulfurization treatment apparatus for boilers and its operating method
pp. 203-203(1)
Author: Katakawa A.

Fouling of heat-transfer surfaces in oil-fired boilers for domestic heating
pp. 203-203(1)
Author: Butcher T.

Heat recovery from the starting vessel of a once-through boiler system
pp. 203-204(2)
Authors: Ma X.-G.; Chen Z.-H.

Investigation of ash deposition characteristics in pulverized coal firing boiler
pp. 204-204(1)
Author: Tsumita Y.

Mechanisms of hot corrosion of T91 and EM12 steels in gas of coal fired boilers
pp. 204-204(1)
Author: Colot D.

Modernization of the OP-230p steam boiler and machine room of block No. 2 in the Lodz III combined heat power plant
pp. 204-204(1)
Authors: Franczak K.; Masznicz E.

Monitoring of the consumption of coal dust in burners of a boiler equipped with a feed system for high concentration coal dust
pp. 204-204(1)
Author: Kesova L.A.

Operation of an OP-230 boiler equipped with low-emission swirl burners at the Gdansk II Combined Heat Power Plant Installation and operational experience
pp. 204-204(1)
Author: Swietlik K.

Promising steam-gas installations with coal gasification for environmentally acceptable power engineering
pp. 204-204(1)
Author: Ol'khovskii G.G.

Purification of coal fired boiler flue gas and fertilizer production by using electron beam
pp. 204-204(1)
Author: Maezawa A.

Rafako experience in new designs of low-emission burners and furnaces for coal-fired boilers
pp. 204-204(1)
Author: Wala T.

Recirculating fluidized bed boilers. Implementation in Poland and operational experience
pp. 204-204(1)
Author: Krupka S.

Results of field tests on 9% chrome steels at the Wilhelmshaven power station, Germany
pp. 204-204(1)
Author: Zabelt K.

Split stream boilers for high-temperature/high-pressure topping steam turbine combined cycles
pp. 204-204(1)
Author: Rice I.G.

Anthracite coal combustion in a bench scale two-stage swirl-flow fluidized bed combustor
pp. 204-204(1)
Authors: Lee J.-K.; Chun H.-S.

Catalytic influence of ash elements on NO_x formation in char combustion under fluidized bed conditions
pp. 204-205(2)
Authors: Koepsel R.F.W.; Halang S.

Co-combustion of wet sewage sludge in a coal-fired circulating fluidised-bed combustor
pp. 205-205(1)
Authors: Philippek C.; Werther J.

The co-firing of pulverized bituminous coals with straw, waste paper, and municipal sewage sludge
pp. 205-205(1)
Authors: Van De Kamp W.L.; Morgan D.J.

Combustion apparatus and its operation control method
pp. 205-205(1)
Authors: Koseki H.; Shigeoka H.

Combustion of coal in pressurized fluidized bed reactors
pp. 205-205(1)
Author: Artlich S.

Combustion of mixtures of recycled fuel, peat, and coal in a fluidized-bed reactor
pp. 205-205(1)
Author: Vesterinen R.

Effect of a corona discharge on condensation of products of pyrolysis of wood and coal
pp. 205-205(1)
Author: Igoshin V.A.

Effect of combustion on the economic operation of endoreversible Otto and Joule-Brayton engine
pp. 205-205(1)
Authors: Bera N.C.; Bandyopadhyay S.

The effect of size distribution of particles on the optical properties of the disperse phase of solid fuel combustion products
pp. 205-205(1)
Author: Vaulina O.S.

Effects of chemical additives on coal combustion
pp. 205-205(1)
Authors: Wu Z.; Duan S.

The fate of fixed carbon during the fluidized-bed combustion of a coal and two waste-derived fuels
pp. 205-205(1)
Author: Arena U.

Fireside corrosion of selected alloys by ash recovered from coal-water slurry combustion
pp. 205-206(2)
Authors: Shamanna S.; Schobert H.H.

Flame structure and combustion rate of burning graphite in the stagnation flow
pp. 206-206(1)
Author: Makino A.

Fluidized bed combustion unit for oil shale
pp. 206-206(1)
Author: Hammad M.

Fluidized-bed gasification combustion furnace for coal and solid waste
pp. 206-206(1)
Author: Eito S.

Heat transfer to a horizontal tube bundle located in the freeboard of a bubbling fluidized bed combustor
pp. 206-206(1)
Author: Hafez A.H.A.

The impact of fragmentation on char conversion during pulverized coal combustion
pp. 206-206(1)
Authors: Mitchell R.E.; Akanetuk A.E.J.

In situ alkali concentration measurements in a pressurized, fluidized-bed coal combustor by excimer laser induced fragmentation fluorescence
pp. 206-206(1)
Author: Greger F.

Influence of biological desulfurization on coal combustion performance
pp. 206-206(1)
Author: Rubiera F.

Influence of process parameters on nitrogen oxide formation in pulverized coal burners
pp. 206-206(1)
Author: Van Der Lans R.P.

Laser spark ignition and combustion characteristics of methane-air mixtures
pp. 206-207(2)
Author: Ma J.X.

Mathematical model for single pulverized coal combustion
pp. 207-207(1)
Author: Chen Y.

Modelling sulfur dioxide capture in a pulverized coal combustor
pp. 207-207(1)
Authors: Nair R.B.; Yavuzkurt S.

A multi domain method for the simulation of pulverized coal fired multiburner furnaces
pp. 207-207(1)
Author: Jacobson T.

A new combustion stability index CSI for utility coal-fired boilers
pp. 207-207(1)
Author: Cheng R.

Operation of combustion plant of coal-fired power station with slag tap firing
pp. 207-207(1)
Author: Hums E.

PFBC: Competitive power with minimal environmental impact. Practical experience
pp. 207-207(1)
Authors: Anderson J.; Anderson L.

Propagation limits of dust/air flames diluted by additions of inert solid particles
pp. 207-207(1)
Authors: Blouquin R.; Joulin G.

Pyrolysis of coals of various degrees of metamorphism in the presence of hydroxides and acid
pp. 207-207(1)
Authors: Tamko V.A.; Shevkoplyas V.N.

Solid fuel products free of slag formation in combustion
pp. 207-207(1)
Authors: Drisdelle M.; Lapointe C.

Soot and PAH production from spray combustion of different hydrocarbons behind reflected shock waves
pp. 208-208(1)
Authors: Wang R.; Cadman P.

Soot microstructure in steady and flickering laminar methane/air diffusion flames
pp. 208-208(1)
Authors: Zhang J.; Megaridis C.M.

Soot morphology in a liquid-fueled, swirl-stabilized combustor
pp. 208-208(1)
Author: Fang T.C.

Soot precursor carbonization: visualization using LIF and LII and comparison using bright and dark field TEM
pp. 208-208(1)
Author: Vander Wal R.L.

Statistical kinetics for pulverized coal combustion
pp. 208-208(1)
Author: Hurt R.H.

Structure and extinction of methane-air flamelet with radiation and detailed chemical kinetic mechanism
pp. 208-208(1)
Author: Chan S.H.

Study of the internal circulating fluidized bed combustion technology for burning high-moisture and low-heating-value fuels
pp. 208-208(1)
Author: Sheng H.

A study on final volatile yield of pulverized coal pyrolysis with thermobalance
pp. 208-208(1)
Author: Zhu Q.

Study on flow and combustion characteristics of bluff-body wakes
pp. 208-208(1)
Author: Ma X.

Study on NO_x formation characteristics of medium-Btu coal gasified fuel
pp. 208-208(1)
Authors: Hasegawa T.; Sato M.

Transient high-temperature thermal deactivation of monomaceral-rich coal chars
pp. 208-209(2)
Author: Beeley T.

Alkali separation in steam injected cyclone wood powder gasifier for gas turbine application
pp. 209-209(1)
Authors: Fredriksson C.; Kjellstrom B.

Commercializing black liquor and biomass gasifier/gas turbine technology
pp. 209-209(1)
Authors: Larson E.D.; Raymond D.R.

Effect of pressure transducer position on measured cylinder pressure diagram of high speed diesel engines
pp. 209-209(1)
Authors: Hountalas D.T.; Anestis A.

Impact of energy efficient motors in the petrochemical industry
pp. 209-209(1)
Authors: Cheek K.F.; Pillay P.

Method and apparatus for coal direct combustion gas-turbine combined-cycle power generation with alkali metal vapor stripping
pp. 209-209(1)
Author: Takao S.

Method and apparatus for dividing and feeding fuel gases to fuel cell and turbine
pp. 209-209(1)
Authors: Noelscher C.; Suchy P.

MILP optimization of a CHP energy system
pp. 209-209(1)
Authors: Bojic M.; Stojanovic B.

Next-generation integration concepts for air separation units and gas turbines
pp. 209-209(1)
Author: Smith A.R.

Performance investigation of a hydroelectric power station at Batang Ai-Sarawak
pp. 210-210(1)
Authors: Al-Zubaidy S.; Rigit A.

Reciprocating steam engine power plants fed by woodwaste
pp. 210-210(1)
Author: Bidini G.

Simulation and analysis of a naturally aspirated IDI diesel engine under transient conditions comprising the effect of various dynamic and thermodynamic parameters
pp. 210-210(1)
Authors: Rakopoulos C.D.; Giakoumis E.G.

Apparatus for drying iron ore and coke
pp. 210-210(1)
Author: Tamura N.

Briquetting of electric-arc furnace dust with coal fines for smelting with recovery of iron and zinc
pp. 210-210(1)
Authors: Myerson A.S.; Robinson P.

Coke for cupola
pp. 210-210(1)
Author: Kawarnura T.

Combustion and gasification behaviors of plastics injected into raceway of blast furnace
pp. 210-210(1)
Author: Asanuma M.

Development of high power oxy-coal burner
pp. 210-210(1)
Authors: Dong Y.; Song Y.

Device and process for blowing coal into shaft furnace
pp. 210-210(1)
Author: Languer K.

Effect of coal type on coal-based direct reduction of low grade iron ore
pp. 210-210(1)
Author: Zhang Q.

Effect of nonuniformity of the distribution of coal dust with respect to tuyeres on the nature of temperature fields in a blast furnace
pp. 210-210(1)
Authors: Dmitriev A.N.; Shavrin S.V.

Effect of oxygen content in the blast on the nature of temperature fields in a blast furnace during injection of coal dust
pp. 210-211(2)
Authors: Dmitriev A.N.; Shavrin S.V.

Experimental study on scrap melting in coal-oxygen furnace
pp. 211-211(1)
Author: Zhu R.

Influence of characteristics of the manufacturing of industrial cokes and the subsequent alkali doping on carbon reactivity
pp. 211-211(1)
Author: Charue B.

Life cycle inventory analysis of pulverized coal injection into blast furnace
pp. 211-211(1)
Authors: Kusamichi T.; Onoye T.

Load distribution and reducer combustion considering pulverized coal injection in blast furnaces
pp. 211-211(1)
Author: de Oliveira M.A.

Metallurgical applications of upgraded coal from the Liquids From Coal process
pp. 211-211(1)
Author: White L.C.

Method and apparatus for reducing iron ore/coal pellets
pp. 211-211(1)
Author: Kamikawa S.

Method and vessel and apparatus for treatment of particulate matter, especially reduction of fine ores by fluidization
pp. 211-211(1)
Author: Kepplinger L.W.

Method for charging coke into blast furnace
pp. 211-211(1)
Author: Kitayama S.

Method for charging coke into blast furnace
pp. 211-211(1)
Authors: Takao M.; Ito Y.

Method for charging iron ore into blast furnace
pp. 211-211(1)
Author: Matsui Y.

Method for measurement of reduction degree in iron ore-coal pellets
pp. 211-211(1)
Author: Sun J.

Model approaches to kinetic foundations of high-speed pyrolysis of coal powder in conditions of steel bath
pp. 211-211(1)
Authors: Konyshev V.P.; Ivashenkova N.N.

New aspects in the theory and practice of column flotation
pp. 211-211(1)
Authors: Rubinstein J.; Badenicov V.

Operation of a blast furnace using coke from rammed coal charges
pp. 211-211(1)
Author: Karpov A.V.

Pellets for manufacture of direct reduced iron
pp. 212-212(1)
Author: Matsumuraa T.

Production of reduction gas for reduction of metal ore
pp. 212-212(1)
Author: Kepplinger L.W.

The production of stainless steel through smelting reduction of chrome ores using coal and oxygen
pp. 212-212(1)
Author: Treadgold C.

Replacement of coal by coke in plants with increased sulfur content in raw materials
pp. 212-212(1)
Authors: Del Pozo Gadea F.J.; Martinez Vuches F.J.

Simultaneous manufacture of molten pig iron and reducing gas
pp. 212-212(1)
Authors: Gennari U.; Schenk J.-L.

Smelting of iron ores in a blast furnace using powdered coal for fuel and reducing gas
pp. 212-212(1)
Author: Satchell D.P.

Smelting of vanadium-containing pig iron with coke of unregulated quality
pp. 212-212(1)
Author: Gavrilyuk I.G.

Start up of pulverized coal injection in the 01 blast furnace of CST
pp. 212-212(1)
Author: Klein C.A.

Start-up and operating results of POSCO Corex plant
pp. 212-212(1)
Author: Eberle A.

Theoretical and laboratory investigation of pig iron smelting in a ROMELT furnace by using iron-coal
pp. 212-212(1)
Author: Vegman E.F.

Treatment of coal ash in blast furnace
pp. 212-212(1)
Author: Okuyama Y.

Use of a semiwet charge--preparation method in complex processing of synnyrites by sintering
pp. 212-212(1)
Author: Shmigidin Y.I.

Use of coke at Belgo-Mineira's blast furnaces
pp. 212-212(1)
Author: Braga R.N.B.

Advanced silicoboron carbonitride ceramics stable to 2000^oC
pp. 212-212(1)
Authors: Ruwisch L.M.; Riedel R.

Conditions for testing the corrosion rates of ceramics in coal gasification systems
pp. 213-213(1)
Authors: Hurley J.P.; Nowok J.W.

Corrosion and its effect on mechanical properties of materials for advanced combustion systems
pp. 213-213(1)
Author: Natesan K.

Crystallizability and physicochemical properties of industrial waste-based glasses
pp. 213-213(1)
Author: Sidikova T.D.

Dynamic fatigue behavior of two SiC and a SiCp reinforced Al₂O₃ at elevated temperatures
pp. 213-213(1)
Authors: Breder K.; Tennery V.J.

Effect of coal slag on the wear rate and microstructure of the ZrO₂-bearing chromia refractories
pp. 213-213(1)
Author: Guo Z.-Q.

Electrochemical nucleation for the preparation of oriented glass ceramics
pp. 213-213(1)
Authors: Keding R.; Ruessel C.

Formation of low-porosity compact diamond ceramics: synthesis and Raman spectroscopic characterization
pp. 213-213(1)
Author: Semchinova O.K.

Glass-ceramics from municipal incinerator fly ash
pp. 213-213(1)
Author: Boccaccini A.R.

High temperature corrosion of advanced ceramic materials for hot gas filters and heat exchangers
pp. 213-213(1)
Author: Crossland C.E.

The homogeneity of sintering in modern ceramic tunnel kiln
pp. 213-213(1)
Author: Song Z.

Investigation and application of Cr₂O₃-Al₂O₃-ZrO₂ refractories for slagging coal gasifiers
pp. 213-214(2)
Authors: Guo Z.; Hui Z.

Layered ceramic- or cermet-based sensor for detection of oxidizing gases
pp. 214-214(1)

Manufacture of antimicrobial ceramics through metal ion exchange on zeolite formed by conversion of fly ash
pp. 214-214(1)
Author: Fujimoto T.

Mud volcanoes of Trinidad: nature mined sources of raw material for ceramics?
pp. 214-214(1)
Author: Knight J.C.

Operating characteristics of lining of a tubular rotary oven during roasting of anthracite
pp. 214-214(1)
Author: Khan A.V.

Performance and stability of porous ceramic candle filters during PFBC operation
pp. 214-214(1)
Author: Alvin M.A.

Recent operating experiences of the advanced ceramic tube filter (ACTF) for the Wakamatsu 71 MW PFBC demonstration plant and design improvements for commercial plants
pp. 214-214(1)
Author: Maeno H.

Resistance of alumina-chromia refractories to molten fly ash
pp. 214-214(1)
Author: Gochi S.

The solidification characteristics of 6061 and A356 aluminum alloys and their ceramic particle-reinforced composites
pp. 214-214(1)
Authors: Jeng S.-C.; Chen S.-W.

Strength and corrosion behavior of SiC-based ceramics in hot coal combustion environments
pp. 214-214(1)
Authors: Breder K.; Parten R.J.

Thermochemistry of corrosion of ceramic hot gas filters in service
pp. 214-214(1)
Author: Crossland C.E.

Thermomechanical analysis of refractory lining in the blast furnace shaft
pp. 214-215(2)
Author: de Andrade S.O.

Trends in development of siliceous products for coke oven batteries in the Chrzanowskie Refractory Plant
pp. 215-215(1)
Author: Drozdz M.

Vitrification of fly ash from thermal power stations
pp. 215-215(1)
Author: Barbieri L.

Comparison of the performances of NH₃-H₂O, NH₃-LiNO₃ and NH₃-NaSCN absorption refrigeration systems
pp. 215-215(1)
Author: Sun D.-W.

Dynamic thermal behaviour of cooling towers
pp. 215-215(1)
Author: Al-Nimr M.A.

Energy conservation in high-rise buildings: changes in air conditioning load induced by vertical temperature and humidity profile in Delhi
pp. 215-215(1)
Author: Sinha S.

Experimental investigation of a combined ejector-absorption refrigerator
pp. 215-215(1)
Authors: Aphornratanas S.; Eames I.W.

Heat transfer effects on the net work output and efficiency characteristics for an air-standard Otto cycle
pp. 215-215(1)
Author: Chen L.

A new three-parameter cubic equation of state of refrigeration engineering calculations
pp. 215-215(1)
Author: Zhang H.-L.

Nitrogen production by cryogenic distillation of air
pp. 215-215(1)
Authors: Coakley V.; Mostello R.A.

Numerical analysis of convection heat transfer in a rectangular packed duct with asymmetric heating
pp. 215-215(1)
Author: Makkawi Y.

Recent researches in indirect evaporative cooler V: relative thermal performance of buildings coupled to direct and indirect evaporative cooler
pp. 215-215(1)
Author: Singh S.P.

Thermodynamic property representation for the R-32/125 binary system by a new cubic equation of state
pp. 215-215(1)
Author: Zhang H.-L.

TIM-PCM external wall system for solar space heating and daylighting
pp. 216-216(1)
Author: Manz H.

Analysis of chemical heat pumps (CHPS): basic concepts and numerical model description
pp. 216-216(1)
Author: Mbaye M.

Design of low temperature absorption heat pump which uses water as working fluid and water solution of LiBr as absorbent
pp. 216-216(1)
Author: Langfelder I.

Effect of climatic conditions on the design optimization of heat pump systems for space heating and cooling
pp. 216-216(1)
Authors: Zogou O.; Stamatelos A.

Effect of heat transfer law on finite-time exergoeconomic performance of Carnot heat pump
pp. 216-216(1)
Author: Wu C.

Optimization of steady flow heat pumps
pp. 216-216(1)
Author: Wu C.

A review of developments in solid-vapour adsorption-refrigeration and heat-pump systems
pp. 216-216(1)
Authors: Srivastava N.C.; Eames I.W.

Techno-economic analysis between the performances of heat source air conditioners in South Africa
pp. 216-216(1)
Authors: Petit P.J.; Meyer J.P.

Activated carbon membrane for water treatments: application to decolorization of coke furnace wastewater
pp. 216-216(1)
Author: Sakoda A.

Adsorption and denitrification characteristics of activated coke for advanced flue gas treatment
pp. 216-217(2)
Author: Kawamoto K.

Analysis of organic compounds (PCDD/Fs in fuel gas, PCDD/Fs, PAHs, PCBs in various ashes) of wood waste fired boilers
pp. 217-217(1)
Authors: Pagger E.; Theuermann J.

Apparatus for removal of dust from corrosive gas-containing coal gas and manufacture of same
pp. 217-217(1)
Author: Fukuda Y.

Assessment of in situ solvent extraction with interrupted pumping for remediation of subsurface coal tar contamination
pp. 217-217(1)
Author: Ghosh R.S.

Assessment of the changes in the chemical composition of the crude oil spilled in the Kuwait desert after weathering for five years
pp. 217-217(1)
Author: Saeed T.

Biological treatment of wastewater from coke oven gas
pp. 217-217(1)
Author: Toki S.

Bioremediation of damaged desert environment using the windrow soil pile system in Kuwait
pp. 217-217(1)
Author: Al-Daher R.

Calcium type desulfurization agent and coal combustion gas desulfurization using the agent
pp. 217-217(1)
Author: Yoshimatsu H.

Characteristics of vaporization of coal ash minerals chlorinated by gaseous hydrogen chloride
pp. 217-217(1)
Author: Shimada T.

Circulating fluidized bed combustion ash characterization: the case of the Provence 250 MW unit
pp. 217-217(1)
Author: Lecuyer I.

Coke-chemical wastewater treatment with the three-phase air lift-loop reactor
pp. 218-218(1)
Author: Cai J.

Combustion generated particulate emissions
pp. 218-218(1)
Author: Tuttle K.L.

Compaction of fly and bottom ash mixtures
pp. 218-218(1)
Author: Korayem A.

Controlling ventilation for safe escape from coal mine fires
pp. 218-218(1)
Author: Wala A.M.

Design and construction of treatment facilities in the mining areas
pp. 218-218(1)
Author: Gontarevskii V.P.

Desulfurization of stack gases from coal power stations and progress in sulfur dioxide emission reduction in Czech Republic
pp. 218-218(1)
Authors: Kraitr M.; Sirotek V.

Diesel particulate matter (DPM) in workplaces in Germany
pp. 218-218(1)
Authors: Dahmann D.; Bauer H.-D.

Dioxin formation inhibitors in incinerators and method for preventing the formation of dioxins
pp. 218-218(1)
Author: Karasek F.W.

DNA adducts in coal miners: association with exposures to diesel engine emissions
pp. 218-218(1)
Author: Qu S.-X.

Dust concentrations from fixed emission sources in Hyogo Prefecture
pp. 218-218(1)
Authors: Tanimoto T.; Koyama T.

Effects of launch vehicle emissions in the stratosphere
pp. 218-218(1)
Author: Brady B.B.

Effects of the European explosion protection directives on the coal mining industry
pp. 219-219(1)
Author: Fuchs E.

Efficient denitrification method for treating ammonia containing wastewater from coke oven gas by the adding hydrogen donors
pp. 219-219(1)
Author: Toki S.

Environmental aspects of bioconversion processes
pp. 219-219(1)
Author: Klein J.

The environmental impacts associated with a coal mine in the Witbank Coalfield, Republic of South Africa
pp. 219-219(1)
Author: Bullock S.E.T.

Estimation of methane emission under global warming
pp. 219-219(1)
Author: Velichko A.A.

Evaluation and control of employee exposure to diesel particulate at several Australian coal mines
pp. 219-219(1)
Author: Pratt S.L.

Experience with cleaning exhaust gases with lime products in coal-fired power stations and waste incineration plants
pp. 219-219(1)
Author: Weiler H.

Factors of pollutant release during energetic use of waste
pp. 219-219(1)
Author: Meyer W.

Flue gas desulfurization of lignite-fired power stations with limestone or fine lime
pp. 219-219(1)
Author: Breuer H.

Flue gas desulfurization scrubbers '2000'. A new generation of SO₂ absorbers for brown coal-fired power stations
pp. 219-219(1)
Author: Heiting B.

Flue gas desulfurization with high contact efficiency between flue gas and absorbent liquid
pp. 219-220(2)
Author: Tamaru T.

Fly ash binders in stabilization of FGD wastes
pp. 220-220(1)
Author: Ibanez R.

Fly ash treatment for secondary environmental pollution prevention
pp. 220-220(1)
Author: Yasuda S.

Full-scale plant study on low temperature thermal dechlorination of PCDDs/PCDFs in fly ash
pp. 220-220(1)
Author: Ishida M.

Fundamental process properties of hot gas desulfurization
pp. 220-220(1)
Author: Peng W.

GHG abatement in central Canada with interprovincial cooperation
pp. 220-220(1)
Author: Loulou R.

Hot gas desulfurization with zinc titanate sorbents in a fluidized bed. 1. Determination of sorbent particle conversion rate model parameters
pp. 220-220(1)
Author: Konttinen J.T.

Hydraulic ash disposal at Kriel thermal power station and its impact on the ground water regime
pp. 220-220(1)
Author: Stuart R.J.

Impact of opencast coal mining on the air environment
pp. 220-220(1)
Authors: Sekhar M.C.; Rao G.A.

The influence of elemental sulfur on the de-novosynthesis and the oxidation of residual carbon on fly ash
pp. 220-220(1)
Author: Bechtler R.

International greenhouse gas inventory systems: A comparison between CORINAIR and IPCG methodologies in the EU
pp. 220-221(2)
Authors: Salt J.E.; Moran A.

Investigation of the emission-path of heavy metals at the combustion in power plants
pp. 221-221(1)
Author: Wilgeroth U.

The kinetics of NO and N₂O reduction over coal chars in fluidized-bed combustion
pp. 221-221(1)
Author: Li Y.H.

Landscape changes in area of KAFEC strip mines influence, Russia
pp. 221-221(1)
Author: Semenov Y.M.

Low NO_x burners for boilers, furnaces, and gas turbines. Drive towards the lower bounds of NO_x emissions
pp. 221-221(1)
Author: Beer J.M.

Measurement precision with the coal mine dust personal sampler
pp. 221-221(1)
Author: Kogut J.

Methane capture on high-performance coal surfaces
pp. 221-221(1)

Method and apparatus for flue gas treatment by evaporation cooling and scrubbing
pp. 221-221(1)
Author: Waescher T.

Method and device for removing harmful substances and especially dioxin from flue gas in for example waste incinerator by using adsorption agent
pp. 221-221(1)
Author: Uitvlugt M.G.

Method for calculation of methane evolution from a stratum being exploited
pp. 221-221(1)
Author: Sheiman E.M.

Method for stabilizing heavy metal in fly ashes from waste incinerator
pp. 221-221(1)
Author: Kuramatsu H.

Method for treating neutral fly ash using incinerator ashes as pH-adjusting agent
pp. 221-221(1)
Authors: Ide M.; Kitahata K.

Methods for determination of benzo[a]pyrene in waste gases of coking industry and in air. Review
pp. 221-221(1)
Author: Dolzhanskaya Y.B.

MHD power systems for reduction of CO₂ emission
pp. 221-221(1)
Authors: Ishikawa M.; Steinberg M.

MHD power systems for reduction of CO₂ emission
pp. 222-222(1)
Authors: Ishikawa M.; Steinberg M.

Microbial degradation of sulfur from lignite on a large laboratory scale
pp. 222-222(1)
Author: Farbiszewska-Bajer J.

Micromorphological, chemical and spectroscopic studies of a Haplic Podzol influenced by airborne organic particles from industrial processes
pp. 222-222(1)
Author: Schmidt M.W.I.

Microscopic characteristics and leaching properties of fly ash from municipal solid waste incinerator
pp. 222-222(1)
Author: Nambu M.

Minimizing wastewater discharge from fossil-fueled power plants
pp. 222-222(1)
Authors: Goldman E.; Nurdogan Y.

National fossil fuels consumption: estimates of CO₂ emissions and thermal pollution
pp. 222-222(1)
Authors: Mariani M.; Casale F.

Nitrogen-containing minerals from industrial waste in the Donets Basin
pp. 222-222(1)
Author: Pak V.V.

Numerical simulation of desulfurization processes of limestone injection into furnace
pp. 222-222(1)
Authors: Zhuo Y.; Xu X.

Operation results of IHI flue gas desulfurization system for unit no. 1 (700 MW) of Reihoku Power Station of Kyushu Electric Power Co., Inc.
pp. 222-222(1)
Author: Tamaru T.

Optimization of sulfur impregnation protocol for fixed-bed application of activated carbon-based sorbents for gas-phase mercury removal
pp. 222-222(1)
Author: Liu W.

An overview of diesel particulate exposures and control technology in the U.S. mining industry
pp. 222-222(1)
Author: Haney R.A.

Personal safety and protective equipment. Implementation and experience from the viewpoint of the users
pp. 222-223(2)
Author: Hirth T.

Photochemical degradation of PAHs on smoke particles in atmosphere
pp. 223-223(1)
Author: Wang W.

Pollutant emissions from combustion plants
pp. 223-223(1)
Author: Riva A.

The possibilities of the absorption of nitric oxides by dense fly ash suspensions. Part I
pp. 223-223(1)
Author: Sulkowski W.

Problems of air pollution in Estonia
pp. 223-223(1)
Author: Roots O.

Properties of mineral components of coals affecting environmental pollution by thermal power plants
pp. 223-223(1)
Author: Dik E.P.

Prospect of microbiological technology for flue gas desulfurization
pp. 223-223(1)
Author: Wang W.

Provisions for safety and rescue of people during fires in long cuttings
pp. 223-223(1)
Authors: Stelko'schchikov G.G.; Kuz'minich V.A.

Pyrolysis gas of biomass and coal as a NO_x-reductive in a coal fired test facility
pp. 223-223(1)
Author: Rudiger H.

Radioactive gas measurement in underground coal mines
pp. 223-223(1)
Author: Gua Y.

Reduction of dust emissions at coking plants
pp. 223-223(1)
Author: Stefanenko V.T.

Reduction of fly ash emissions at a thermal power plant in electric gas cleaning
pp. 223-223(1)
Author: Zykov A.M.

Reduction of SO₂ emissions from a fluidized bed under staged combustion by fine limestone
pp. 223-223(1)
Authors: Knan W.Z.; Gibbs B.M.

Removal of pollutants from waste gases by adsorption
pp. 223-223(1)
Author: Rolke D.

Removal of toxic nonmetallic oxide gases from gases
pp. 223-223(1)
Author: Makina Y.

Respirable airborne dust exposure levels in the New South Wales coal mining industry
pp. 223-224(2)
Authors: Glover D.; Cram K.

Respirable coal dust control using surfactants
pp. 224-224(1)
Authors: Tien J.C.; Kim J.

Retrofitting and first operational experiences of two major WTE facilities to meet present and proposed standards of emissions to air
pp. 224-224(1)
Author: Heap B.M.

Role of methane gas emission in coal outbursts
pp. 224-224(1)
Authors: Valliappan S.; Wahua Z.

The role of radiation absorption in defining explosibility of coal/rock dust mixtures
pp. 224-224(1)
Authors: Llitton C.D.; Chaiken R.F.

Several-year experience with high-dust 10.0-pitch ZERONOX catalysts
pp. 224-224(1)
Author: Bonau H.-W.

Significance of structural and chemical changes in metamorphic coals in the formation of geological discharge hazard
pp. 224-224(1)
Author: Frolkov G.D.

Solid combustible agent for removing soot and tar from chimneys
pp. 224-224(1)
Authors: Boinet O.; Faijon T.

Some problems associated with past mining at a mine in the Witbank coalfield, South Africa
pp. 224-224(1)
Authors: Bullock S.E.T.; Bell F.G.

Sources of strong primary acidity in the atmosphere
pp. 224-224(1)
Author: Primerano P.

The status of oil pollution in the Arabian Gulf by the end of 1993
pp. 224-224(1)
Author: Massoud M.S.

Studies of gas outburst mechanism and its dangerous prediction in coal tunnels
pp. 224-224(1)
Authors: Lin B.; Zhou S.

Study on stability of methane detection elements with supported catalysts used in coal mines
pp. 224-224(1)
Authors: Li X.; Chen Y.

Surface composition of respirable silica particles in a set of U.S. anthracite and bituminous coal mine dusts
pp. 225-225(1)
Author: Harrison J.C.

Surface evaluation of gas accumulation in cutting space
pp. 225-225(1)
Authors: Portola V.A.; Kirenberg A.G.

Surveillance for the effects of carbon monoxide on health in a Tianjin gas factory (China)
pp. 225-225(1)
Author: Li X.X.

Sustainable greenhouse gas abatement: the case of Quebec
pp. 225-225(1)
Author: Loulou R.

Technical requirements for on-site low temperature thermal treatment of nonhazardous soils contaminated with petroleum/coal tar/gas plant wastes
pp. 225-225(1)
Authors: Harrington J.B.; Renda C.

Thermal treatment of incinerator fly ash: factors influencing the evaporation of ZnCl₂
pp. 225-225(1)
Authors: Stucki S.; Jakob A.

Transport and mobility
pp. 225-225(1)
Author: Hoyer K.G.

The treatment method of coke-oven gas liquid with recycle of nitrified liquor
pp. 225-225(1)
Author: Toki S.

Treatment of wastewater with high concentration of organic matters by catalytic wet oxidation method. I. Study of wet oxidation catalysts
pp. 225-225(1)
Author: Du H.

Trends and characteristics of hazardous waste derived fuel burned for energy recovery in cement kilns: an Essorc perspective
pp. 225-225(1)
Author: Graf B.K.

Use of humic acid or humic acid derivatives for treating wastewater, exhaust gases, and flue gases
pp. 225-225(1)
Authors: Pfueller U.; Kleine K.-H.

Water treatment using a carbon adsorbent
pp. 225-225(1)
Author: Gordiernko A.I.

Additives for aqueous slurries containing ultrafine carbonaceous particles
pp. 226-226(1)
Author: Kakui K.

Analysis of thermal radiation in coal-fired furnaces
pp. 226-226(1)
Author: Miles J.J.

Analytical-mathematical-physical approach to pre-calculation of methane degassing
pp. 226-226(1)
Author: Martens P.N.

Apparatus for supplying mortar in sealing the covers of coke ovens
pp. 226-226(1)
Author: Sakuma H.

Application of radon measurement technique to detection of underground fire area limits
pp. 226-226(1)
Author: Liu H.

Burner and a fuel supply method
pp. 226-226(1)
Author: Yokohama K.

Calibration and correction of laser-induced incandescence for soot volume fraction measurements
pp. 226-226(1)
Authors: Choi M.Y.; Jensen K.A.

Coal power plant requirements in materials and material development for today and tomorrow
pp. 226-226(1)
Author: Martin P.

Computer-aided study on the influence of catalysts on the coal ignition property. (III)
pp. 226-226(1)
Author: Wu Z.

Control of fines plant
pp. 226-226(1)
Author: Jones T.

Corrosion in the Newcastle coal loading facilities
pp. 226-226(1)
Authors: Garrett A.; Ahmed N.

Corrosion monitoring in pilot and mini plants
pp. 226-226(1)
Author: Heitz E.

Determination of uranium-233 in the slag
pp. 226-226(1)
Author: Chitambar S.A.

Development of a standardized test for the reactivity of semicoke in NOx reduction
pp. 227-227(1)

Development of equations to predict dilatation temperatures and expansion values for binary coal blends
pp. 227-227(1)
Author: St James J.W.

Development of new estimation method for CO₂ evolved from oil shale
pp. 227-227(1)
Authors: Sato S.; Enomoto M.

Differential thermal analyser coupled with data processor for investigating combustion and thermokinetic characteristics of materials
pp. 227-227(1)
Author: Yu Z.

Discharge and feeding applications for horizontal rotary feeders
pp. 227-227(1)
Author: Wilms H.

Dynamic precision of a system for automatic dispensing of flotation agents
pp. 227-227(1)
Authors: Skopets V.S.; Spiridonov M.A.

Effect of the particles thermal exposure on the unsteady state heating and thermochemical failure of coking thermal insulators
pp. 227-227(1)
Authors: Burakov V.A.; Sandu S.F.

Electron structure of an cobalt-molybdenum-alumina catalyst for hydrogenation of fuels
pp. 227-227(1)
Author: Gagarin S.G.

Establishing of emission factors of carbon for coal of the Czech Republic
pp. 227-227(1)
Author: Fott P.

Evolution of hydrogen sulfide in hydrogenation of sulfurous compounds of brown and high-volatile coals
pp. 227-227(1)
Author: Osipov A.M.