Fuel and Energy Abstracts

Analysis of material collected on particles exposed to volatile matter of bituminous coal in a fluidized bed
pp. 208-208(1)
Author: Vurala H.

Ash content as a criterion for determining classification parameters of coals
pp. 208-208(1)
Author: Fon M.G.

Assessing the maturity of coals and other rocks from North America using the fluorescence alteration of multiple macerals (FAMM) technique
pp. 208-208(1)
Author: Lo H.B.

Assessment of coal reactivity during preheating by the relationships between structural and plastic properties. Chemometric analyses
pp. 208-208(1)
Author: Pieri N.

The carbonate concretions in the seams of the Schoeningen open-cast mine of BKB AG., Germany
pp. 208-208(1)
Author: Schinkmann R.

Change in the associated molecular structure of coals in pyridine/carbon disulfide mixed solvents
pp. 208-208(1)
Author: Kumagai H.

Changes in the macromolecular structure of coals with pyrolysis temperature
pp. 208-208(1)
Author: Ndaji F.

The changing particle size distribution in micronized coal and micronized coal water mixture flames: its influence on heat transfer
pp. 208-208(1)
Author: Sharifi R.

Characteristics of coking coal burnout
pp. 208-208(1)
Author: Nakamura M.

Characterization of ash deposit structure from planar sections: Results and challenges
pp. 208-208(1)
Authors: Ramer E.R.; Martello D.V.

Characterization of the soluble and insoluble fractions of Upper Freeport coal in NMP/CS₂ and pyridine using small angle neutron scattering
pp. 208-208(1)
Author: Cody G.D.

Chemical structures of branched alkanes identified in Jurassic coals with coal-related mudstones from the Turpan-Hami basin and their geochemical significance
pp. 209-209(1)
Author: Wang C.

Comput-aided study on the influence of catalysts on the coal ignition property. (I). Influence of alkali and alkaline earth metal salts on the coal ignition property
pp. 209-209(1)
Author: Wu Z.

Consideration on bond cleavage reactions of bridge structure in coal models and coal with two different hydrogen donating compounds
pp. 209-209(1)
Author: Kidena K.

Determination of skeletal density of coal by atomic distribution function of X-ray diffraction
pp. 209-209(1)
Author: Li Z.

Diffusion rates of organic solvents in coals: activation energies
pp. 209-209(1)
Authors: Otake Y.; Suuherg E.M.

Effect of oxidation on technological properties of coal in relation to combustion
pp. 209-209(1)
Author: Moran A.

Effect of solvents on the coal pyrolysis under mild conditions
pp. 209-209(1)
Authors: Ismagilov M.S.; Karobetskii I.A.

Excluded/included mineral matter and its size distribution relative significance on slagging and fouling characteristics
pp. 209-209(1)
Author: Gupta R.P.

Expansion of coal resources for the manufacture of metallurgical fuel
pp. 209-209(1)
Author: Gainieva G.R.

Flotation and oil agglomeration studies for beneficiation of -0.5 mm coal of Zonguldak washery
pp. 209-209(1)
Authors: Cuhadaroglu D.; Ozdag H.

Geochemistry and mineralogy of Greek lignites from the loannina basin
pp. 209-209(1)
Author: Gentzis T.

The geology and coal petrology of a Pleistocene lignite profile at Horemi mine, Megalopolis Basin, Peloponnese (southern Greece)
pp. 209-209(1)
Authors: Sakorafa V.; Michailidis K.

Geometric and physical properties of coal char during combustion
pp. 209-209(1)
Author: Li C.

Hard coal surface heterogeneity in the sorption process
pp. 209-209(1)
Authors: Milewska-Duda J.; Duda J.

Hydrothermal Reaction of Ca(OH)₂ with Quartz in Connection with Coal Demineralization
pp. 210-210(1)
Authors: Wang J.; Tomita A.

Identification of coal characteristics indicating problems of swelling during carbonization
pp. 210-210(1)
Author: Edwards I.

Ignition behavior of pulverized coals
pp. 210-210(1)
Author: Chen J.C.

The influence of photo-oxidation on the wettability of vitrinite from bituminous rank coals
pp. 210-210(1)
Author: Mitchell G.D.

Influence of chemical structure on the fluidity of rapidly heated bituminous vitrinites
pp. 210-210(1)
Author: Mathews J.P.

Investigation of coals and coal conversion products by FTIR methods
pp. 210-210(1)
Author: Romanchuk V.V.

The investigation of effects of some parameters on the performance of selective agglomeration of lignites
pp. 210-210(1)
Author: Cebeci Y.

Investigation of the porous structure of coal using ¹²⁹Xe NMR with selective presaturation and saturation transfer
pp. 210-210(1)
Author: Anderson S.A.

Iron catalysed pyrolysis of a low rank coal
pp. 210-210(1)
Authors: Mastral A.M.; Perez-Surio M.J.

Maceral/microlithotype analysis of the Hard-grove grindability of lithotypes from the Phalen coal bed, Cape Breton, Nova Scotia
pp. 210-210(1)
Authors: However J.C.; Calder J.H.

Measurement and prediction of solubility of petroleum waxes in organic solvents
pp. 210-210(1)
Author: Srivastava S.P.

Mechanism of single coal particle ignition under microgravity condition
pp. 210-210(1)
Author: Katalambula H.

Microcomputer technique in on-line measurement of ash content of coal
pp. 210-210(1)
Author: Liri Q.

Model FJ-2821 -ray ash monitor and its application
pp. 211-211(1)
Author: Zhang Q.

Multivariant statistical methods for examination of trace element distribution in Ruhr coals in Germany
pp. 211-211(1)
Author: Schroeder R.

Nature and distribution of phosphorus minerals in Cook Inlet coals, Alaska
pp. 211-211(1)
Authors: Rao P.D.; Walsh D.E.

¹⁵N CPMAS NMR of the Argonne premium coals
pp. 211-211(1)
Author: Solum M.S.

New approach to coal structure through its evolution during dry catalytic hydrogenation
pp. 211-211(1)
Author: Mastral A.M.

Nitrogen distribution in a fixed bed pyrolysis of coals with different ranks: formation and source of N₂
pp. 211-211(1)
Author: Wo Z.

On a possibility to determine the content of clay minerals hydration water in solid fossil fuels
pp. 211-211(1)
Authors: Urov K.; Koel M.

Possibilities of petrographic analysis methods under modern conditions of coking feedstock resources of Russia
pp. 211-211(1)
Author: Ol'shanetskii L.G.

A preliminary study on the nature of coal in Siari area of East Bokaro Coalfield
pp. 211-211(1)
Author: Maitra A.

Quantitative evaluation and comparison of the thermal properties of coals by dimensionless analysis
pp. 211-211(1)
Author: Adonyi Z.

Quantitative relation between the macromolecular characteristics of brown coal and its reactivity in conversion with Tetralin
pp. 211-211(1)
Author: Kuznetsova P.N.

A question concerning coal structure and/or reactivity. The reaction of maleic anhydride with Pittsburgh No. 8 coal
pp. 211-211(1)
Author: Larsen J.W.

Recent studies on coal structure
pp. 211-211(1)
Author: Yamada O.

Recovery of fine coal from coal preparation plants and tailings ponds by selective oil agglomeration
pp. 211-211(1)
Author: Hoare I.C.

Small angle neutron scattering studies of coal-extract solutions
pp. 212-212(1)
Authors: Thiyagarajan P.; Cody G.D.

Solvent swelling of maceral concentrates
pp. 212-212(1)
Author: Milligan J.B.

Sorption mechanism of various organic vapors to Argonne Premium Coal samples
pp. 212-212(1)
Author: Takanohashi T.

Sorption of methanol on coal
pp. 212-212(1)
Author: Yasuda H.

The South Wales Coalfield: low grade metamorphism in a foreland basin setting
pp. 212-212(1)
Author: Bevins R.E.

Studies on the oxidative degradation of weathered coal with nitric acid
pp. 212-212(1)
Author: Liang R.

Study on CAMD for coal structure
pp. 212-212(1)
Author: Chen H.

A study on catalytic hydrolysis of peat
pp. 212-212(1)
Author: Yan Y.

Study on the chemical structure evolution of Jixi coals
pp. 212-212(1)
Author: Hu S.

Supercritical fluid extraction of a high-ash Brazilian coal extraction with pure ethanol and isopropanol and their aqueous solutions
pp. 212-212(1)
Author: Darivaa C.

Surface spectroscopic studies of factors influencing xanthate adsorption on coal pyrite surfaces
pp. 212-212(1)
Authors: Baltrus J.P.; Diehl J.R.

The temperature dependence on the strain dynamics of solvent dilated coal
pp. 212-212(1)
Author: Cody G.D.

Use of clay-mineral alteration patterns to define syntectonic permeability of joints (cleat) in Pennsylvania anthracite coal
pp. 212-212(1)
Author: Daniels E.J.

Variation in the chemistry of macerals in coals of the Mist Mountain Formation, Elk Valley coalfield, British Columbia, Canada
pp. 212-212(1)
Authors: Mastalerz M.; Bustin R.M.

X-ray diffraction study of Kuznetsk Basin coals
pp. 212-212(1)
Author: Lukovnikov A.F.

X-ray scattering study of coals at middle and low angles
pp. 213-213(1)
Author: Wang C.

An approach for the laboratory investigation of coarse coal dewatering by centrifugation
pp. 213-213(1)
Author: White E.T.

Beneficiation of Indian coal by chemical techniques
pp. 213-213(1)
Authors: Choudhury R.; Bhaktavatsalam A.K.

Biotechnological methods for coal desulfurization
pp. 213-213(1)
Authors: Kalucki K.; Seredyriska B.

Catalytic solubilization of coal and behavior of oxygen containing functional group in the presence of trifluoromethanesulfonic acid
pp. 213-213(1)
Author: Shimizu K.

Centrifugal dewatering and reconstitution of fine coal. The GranuFlow process
pp. 213-213(1)
Authors: Wen W.W.; Killmeyer R.P.

Characterizing dry triboelectrostatic beneficiation of coal and fly ash using recovery analysis
pp. 213-213(1)
Author: Ban H.

Chemical cleaning of Turkish lignites by leaching with aqueous hydrogen peroxide
pp. 213-213(1)
Authors: Karaca H.; Ceylan K.

The chemical structure and thermal modification of low rank coals
pp. 213-213(1)
Author: Nomura M.

Cleaning of Seyitomer lignites by otisca process.
pp. 213-213(1)
Authors: Koca H.; Kaya M.

Coal crushing and pore formation by steam explosion
pp. 213-213(1)
Author: Yamada Y.

Coal dewatering. Australian research and development trends
pp. 213-213(1)
Authors: Lockhart N.C.; Veal C.J.

Coking mechanism of zeolite for supercritical fluid alkylation of benzene
pp. 214-214(1)
Author: Gao Y.

Concentration of coal fines by flotation
pp. 214-214(1)
Authors: Malysa E.; Sanak-Rydlevskan S.

The design of the Landau coal processing plant, South Africa
pp. 214-214(1)
Authors: Boyd I.W.; England T.

Desulfurization of coal using methanol
pp. 214-214(1)
Author: Guanghui W.

Desulfurization of Turkish lignites by NAOH leaching
pp. 214-214(1)
Author: Renda D.

Electrostatic apparatus with annular electrodes for separation of powdered coal from pyrite and ash minerals
pp. 214-214(1)
Author: Brown D.K.

An empirical description for the classification in an inclined counter-flow settler
pp. 214-214(1)
Authors: Thompson P.D.; Galvin K.P.

Factors influencing the moisture content of coarse coal after centrifugation
pp. 214-214(1)
Author: Firth B.A.

Fine coal washability-liberation analysis by cone-beam X-ray microtomography
pp. 214-214(1)
Authors: Miller J.D.; Lin C.L.

Flocculation of fine coal using synthetic and biologically derived flocculants
pp. 214-214(1)
Author: Raichur A.M.

High frequency stimulated coal upgrading
pp. 214-214(1)
Authors: Nazimov S.A.; Korobetskii I.A.

Improved dewatering of coal by steam pressure filtration
pp. 214-214(1)
Authors: Geri S.; Stahl W.

Location of the hydrocarbon potential during coal pyrolysis: implications on the chemical modelling
pp. 214-214(1)
Author: Langlois E.

Methods for preparing and monitoring of heavy media in coal beneficiation
pp. 214-214(1)
Authors: Anuprienko T.A.; Nikitin I.N.

Microscopic observation of coal demineralization by Ca(OH)₂ leaching
pp. 215-215(1)
Author: Wanga J.

Microwave desulfurization of coal
pp. 215-215(1)
Author: Zhao Q.

The mulled coal process. An advanced fine coal preparation technology used to improve the handling characteristics of fine wet coal products
pp. 215-215(1)
Author: Jamison P.R.

New progress in the mechanism of coal pyrolysis
pp. 215-215(1)
Author: Liao H.

New stage of clean coal technology in Japan
pp. 215-215(1)
Author: Kawaguchi Y.

NO reduction by potassium-containing coal briquets effect of mineral matter content and coal rank
pp. 215-215(1)
Author: Garcia-Garcia A.

Optimization of enrichment conditions of Zonguldak hard coal with column flotation
pp. 215-215(1)
Authors: Dalahmetoglu O.; Kemal M.

A parametric study of dewatering of fine coal
pp. 215-215(1)
Authors: Sung D.J.; Parekh B.K.

Pilot-scale evaluation of hyperbaric filtration of ultra fine clean coal
pp. 215-215(1)
Authors: Groppo J.G.; Parekh B.K.

Possibility of securing uniform coal grade for thermal power generating plants by mining and storage process control
pp. 215-215(1)
Author: Simic R.D.

Pretreatment equipment for coal charge for coke oven
pp. 215-215(1)
Author: Igai K.

Pretreatment of coal before supplying in coke oven
pp. 215-215(1)
Author: Igai K.

Reducing the biased slurry feed subdivision in vertical pipe T-junctions using partition wall and stratifier
pp. 215-215(1)
Author: Hu S.

Reflectance analysis of coal feedstocks: the desired and the actual
pp. 215-215(1)
Author: Kiselev B.P.

Rehabilitation of an anthracite-burning power plant in Ukraine with introduction of coal preparation
pp. 215-215(1)
Author: Ruether J.

Role of carboxyl groups in the disintegration of brown coal briquettes by water sorption
pp. 216-216(1)
Author: Ozaki J.-i.

Scanning electron microscopy analysis of coal products from different comminution methods
pp. 216-216(1)
Author: Zhu Q.

Screen dewatering of coal-clay waste from preparation plants
pp. 216-216(1)
Author: Schemer B.J.

Separation of coal particles from Soma fly ash by flotation
pp. 216-216(1)
Authors: Bayat O.; Toraman O.Y.

Solid state 13C CPIMAS--study of changes in coal structure after rapid heating
pp. 216-216(1)
Author: Kawashima H.

Solubilization of an Australian brown coal oxidized with hydrogen peroxide in conventionally used solvents at room temperature
pp. 216-216(1)
Author: Mae K.

Status of foreign R&D programs in the area of ecologically clean coal technologies
pp. 216-216(1)
Author: Vyskubenko Y.A.

Studies on the use of perchloroethylene as a heavy medium for the removal of pyrites from coal
pp. 216-216(1)
Author: Theme T.L.

Study on factors affecting microbial solubilization of lignite
pp. 216-216(1)
Author: Tong W.

Study on multistage hydropyrolysis of coal by thermogravimetry
pp. 216-216(1)
Authors: Li W.; Li B.

Supercritical fluid extraction of a high-ash Brazilian mineral coal
pp. 216-216(1)
Author: Rocha S.R.P.

Surface changes in coals after oxidation. 1. X-ray photoelectron spectroscopy studies
pp. 216-216(1)
Authors: Grzybek T.; Kreiner K.

Surface changes in coals after oxidation. 2. H₂O sorption studies
pp. 216-216(1)
Author: Grzybek T.

Surface chemical control of ultra-fine coal to improve dewatering
pp. 216-216(1)
Authors: Groppo J.G.; Parekh B.K.

Swelling of a German brown coal in acetone-water and methanol-water mixtures
pp. 216-217(2)
Author: Jones J.C.

Thermal and catalytic coprocessing of Illinois No 6. coal with model and commingled waste plastics
pp. 217-217(1)
Authors: Luo M.; Curtis C.W.

Treatment of coal before supplying in coke oven
pp. 217-217(1)
Author: Yokomizo M.

Use of a magnetic fluid-based process for coal separations
pp. 217-217(1)
Authors: Fofana M.; Klima M.S.

Calculation of the air flow rate for ventilation of chambers of underground storage bunkers
pp. 217-217(1)
Author: Bobrov A.I.

Coal log pipeline design and economics
pp. 217-217(1)
Author: Liu H.

Factors influencing the suppression of coal dust explosions
pp. 217-217(1)
Author: Dastidar A.G.

Fiber glass reinforced plastic pipes for coal mines
pp. 217-217(1)
Author: Golyshkin S.P.

Fire in a coal handling plant
pp. 217-217(1)
Author: Lambrecht V.

Improvement of transportability of raw coal ultra-micro powders in metallurgical furnaces or combustion furnace
pp. 217-217(1)
Author: Ono R.

Influence of binder and wall lubrication on compacting coal logs for hydraulic transport
pp. 217-217(1)
Author: Li Y.

Joseph Conrad and the spontaneous combustion of coal. Part 1
pp. 217-217(1)
Author: Walters A.D.

Joseph Conrad and the spontaneous combustion of coal. Part 2
pp. 217-217(1)
Author: Walters A.D.

Oxidation rates of coals as measured from one-dimensional spontaneous heating
pp. 217-217(1)
Authors: Chen X.D.; Stott J.B.

Significance of puff temperature method in spontaneous heating of coals
pp. 218-218(1)
Author: Sankaran N.

Current status and future task of coal utilizing technologies
pp. 218-218(1)
Author: Tomita A.

Does coal have a future?
pp. 218-218(1)
Author: Gutorski K.

Effect of coal mining on the settlements at Ajka and its environment
pp. 218-218(1)
Authors: Frigyes G.; Karoly K.

An estimation of environmental costs of coal-based thermal power generation in India
pp. 218-218(1)
Author: Bhattacharyya S.C.

Modelling and forecasting the demand for coal in China
pp. 218-218(1)
Authors: Chan R.L.; Leeb S.K.

Performance analysis of coal-fired MHD Faraday channel at IEE, China
pp. 218-218(1)
Author: Ishikawa M.

Acid-base properties, deactivation, and in situ regeneration of condensation catalysts for synthesis of methyl methacrylate
pp. 218-218(1)
Author: Gogate M.R.

Carbon materials from coal
pp. 218-218(1)
Author: Derbyshire F.

Characterization of petroleum coke as an additive in metallurgical cokemaking. Influence on metallurgical coke quality
pp. 218-218(1)
Author: Menendez J.A.

The coke dry cooling plant of the coking plant Kaiserstuhl, Germany. Part 2. Balancing and first revision
pp. 218-218(1)
Author: Dunker N.

Co-processing of coal and resid under delayed coking conditions
pp. 218-218(1)
Author: Martin S.C.

Determination of the caking tendency of coal charges on the basis of the sorption theory of coking propensity
pp. 218-218(1)
Author: Dedovets I.G.

Development and improvement of laboratory methods for evaluation of technological properties of coals and charges for coking
pp. 218-218(1)
Author: Ol'shanetskii L.G.

Effect of oven width on coking time
pp. 219-219(1)
Author: Nazarov I.

Estimation of thermal diffusivity of solid part of coke based on image data
pp. 219-219(1)
Author: Nishioka K.

Hyperbaric filtration as a means of increasing fine coal production
pp. 219-219(1)
Author: Hughes J.

Kinetic study of CO₂ gasification of maceral chars prepared from British coal
pp. 219-219(1)
Author: Zhao W.

Manufacture of coke for blast furnaces
pp. 219-219(1)
Author: Kato K.

Manufacture of flowable granular fuel
pp. 219-219(1)

New catalytic methods in processing of solid organic raw materials
pp. 219-219(1)
Author: Kuznetsov B.N.

Porosity and water retention in coarse coking coal
pp. 219-219(1)
Author: Stanmore B.R.

Postreaction mechanical strength of coke from Kuznetsk coals
pp. 219-219(1)
Author: Bazegskii A.E.

Preparation of high-quality pitches. Review
pp. 219-219(1)
Authors: Ruschev D.D.; Bekyarova E.E.

Production of coke from non-caking bituminous coal
pp. 219-219(1)
Author: Caplin P.B.

Programmeable temperature control in an electric furnace for laboratory coking based on a microprocessor controller
pp. 219-219(1)
Author: Reznikov Y.A.

Prospects and technology for manufacture of low-ash coke
pp. 219-219(1)
Author: Sidorov O.F.

Significance of expansion pressure of coal during coking
pp. 219-219(1)
Author: Stuchlik V.

Study of combustion of coal char by thermogravimetry
pp. 219-219(1)
Author: Li W.

Approximations for burning velocities and Markstein numbers for lean hydrocarbon and methanol flames
pp. 219-219(1)
Author: Muller U.C.

Compositional studies of high-temperature coal tar
pp. 220-220(1)
Author: Zhang M.

Evolution of volatile products from Goynuk (Turkey) oil shales by temperature-programmed pyrolysis
pp. 220-220(1)
Author: Ballicea L.

Geochemical study of hydrocarbon resources in northwestern Taiwan
pp. 220-220(1)
Author: Kuo C.

In-situ ¹H NMR study of fluidity enhancement by hydrogen-donor and non-door pitches for a bituminous coal
pp. 220-220(1)
Author: Maroto-Valer M.

Manufacture of high-concentration coal-water slurries
pp. 220-220(1)
Author: Kubo Y.

Organic petrological characteristics of Triassic source rocks and their hydrocarbon-generating potential in Tarim Basin
pp. 220-220(1)
Author: Xiao X.

Origin of petroleum in the Bowen and Surat Basins [Australia]: geochemistry revisited
pp. 220-220(1)
Author: Boreham C.J.

Preliminary characterization of a gas-promoted oil agglomeration process
pp. 220-220(1)
Authors: Drzymala J.; Wheelock T.D.

Preparation, stabilization, and use of fuel suspensions. Review
pp. 220-220(1)
Author: Ruschev D.D.

Self-ignition of S.I. engine model fuels: a shock tube investigation at high pressure
pp. 220-220(1)
Author: Fieweger K.

TLC-FID in quantitative hydrocarbon group type analysis of asphaltenes and other heavy fossil fuels
pp. 220-220(1)
Author: Cebolla V.L.

Biomass-oil slurry fuels: an investigation into their preparation and formulation
pp. 220-220(1)
Author: Benter I.A.

Diesel light oil compositions containing flow improvers
pp. 220-220(1)
Authors: Uchida K.; Hirano H.

Effect of coatings resistant to sulfur compounds in an oil refinery
pp. 221-221(1)
Author: Hs. Noegroho H.

Effect of modifier Pd metal on hydrocracking of polyaromatic compounds over Ni-loaded Y-type zeolite and its application as hydrodesulfurization catalyst
pp. 221-221(1)
Author: Wada T.

Evaluation of Mo catalyst precursors for hydrotreating coal derived liquids
pp. 221-221(1)
Author: Anderson R.K.

Heat treatment of heavy oils with waste plastics for production of light products
pp. 221-221(1)
Author: Takada T.

Microbial production of surfactants and their commercial potential
pp. 221-221(1)
Author: Desai J.D.

Prediction of bulk properties of Fischer-Tropsch derived liquids
pp. 221-221(1)
Authors: Marano J.J.; Holder G.D.

Processing of coal based benzol by hydrorefining and extractive distillation route to meet the emerging challenge from petrobased benzene--an overview
pp. 221-221(1)
Authors: Basu D.K.; Bhattacharya C.

Demand for oil products in the GCC countries
pp. 221-221(1)
Author: Al-faris A.-r.F.

DOE indirect coal liquefaction--and opportunities for its early commercialization
pp. 221-221(1)
Author: Shen J.

An economic study for the co-generation of liquid fuel and hydrogen from coal and municipal solid waste
pp. 221-221(1)
Authors: Warren A.; El-Halwagi M.

Future prospects
pp. 221-221(1)
Author: Avidan A.A.

The international petroleum industry--competition, structural change and allocation of oil surplus
pp. 221-221(1)
Author: Baddour J.W.

Impact of pay-at-the-pump on safety through enhanced vehicle fuel efficiency
pp. 222-222(1)
Author: Khazzoom J.D.

Activity of noble metal-promoted hydroprocessing catalysts for pyridine HDN and naphthalene hydrogenation
pp. 222-222(1)
Authors: Joo H.S.; Guin J.A.

Alternate fuels from the co-liquefaction of coal, oil, and waste plastics
pp. 222-222(1)
Author: Comolli A.G.

Catalytic degradation of medium density polyethylene over silica-alumina supports
pp. 222-222(1)
Author: Ochoa R.

Chromatographic-mass-spectrometric study of the composition of coal-derived oil
pp. 222-222(1)
Author: Kadychagov P.B.

Co-pyrolysis of lignites with oil-products
pp. 222-222(1)
Author: Mustafaev I.

Coal liquefaction by hydrogen-donor solvent
pp. 222-222(1)
Author: Kawabata M.

Design and economics of a Fischer-Tropsch plant for converting natural gas to liquid transportation fuels
pp. 222-222(1)
Author: Choi G.N.

Effect of metallurgical wastes on hydrogenation of slightly metamorphosed coals
pp. 222-222(1)
Author: Osipov A.M.

Effect of reaction parameters and catalyst type on waste plastics liquefaction and coprocessing with coal
pp. 222-222(1)
Authors: Luo M.; Curtis C.W.

Effect of structural alteration on the macromolecular properties of brown and bituminous coals, quantitative relationships to the hydrogenation reactivity with Tetralin
pp. 222-222(1)
Author: Kuznetsov P.N.

Effectiveness of dispersed catalysts in hydrocracking a coal liquefaction extract: a screening study
pp. 222-223(2)
Author: Zhang S.-F.

Effects of hydrogen pressure and temperature on free radicals produced in coal-tire coprocessing
pp. 223-223(1)
Authors: Ibrahim M.M.; Seehra M.S.

Elucidation of coal liquefaction mechanism using a tritium tracer method. Effect of H₂S and H₂O on hydrogen exchange reaction of Tetralin with tritiated molecular hydrogen
pp. 223-223(1)
Author: Godo M.

Ester- and ether bond cleavage in immature kerogens
pp. 223-223(1)
Author: Ambles A.

First-stage direct liquefaction of a subbituminous coal with oil-soluble metal naphthenates as dispersed catalyst precursors
pp. 223-223(1)
Author: Yoon W.L.

Fischer-Tropsch synthesis catalysts and reactors
pp. 223-223(1)
Author: Skala D.

Hydrocarbon class analysis of coal-derived liquids using high-performance liquid chromatography
pp. 223-223(1)
Author: Padlo D.M.

Hydrodeoxygenation of O-containing polycyclic model compounds using a novel organometallic catalyst precursor
pp. 223-223(1)
Author: Kirby S.R.

Hydrogen transfer reactions in coal/tire liquefaction: quantification of H-donor contents
pp. 223-223(1)
Authors: Harrison G.R.; Andrew B.

Hydrogenation of a mixture of coals from the Kansk-Achinsk and near-Moscow Brown Coal Basins under a pressure of 6 MPa
pp. 223-223(1)
Author: Maloletnev A.S.

Hydrogenation/dehydrogenation of polycyclic aromatic hydrocarbons using ammonium tetrathiomolybdate as catalyst precursor
pp. 223-223(1)
Authors: Dutta R.P.; Schobert H.H.

Hydroliquefaction of subbituminous A coal of Fushun, China
pp. 223-223(1)
Authors: Wang S.; Li S.

The influence of solvents on coal liquefaction behavior
pp. 223-223(1)
Author: Zheng J.

Kinetics of high-conversion hydrocracking of bitumen
pp. 223-223(1)
Author: Nagaishi H.

Liquefaction of lignocellulosic and plastic wastes with coal using carbon monoxide and aqueous alkali
pp. 224-224(1)
Author: Sivakumar P.

Liquid-phase conversion of synthesis gas
pp. 224-224(1)
Author: Chaumette P.

The long-term performance of Co/SiO₂ catalysts in CO hydrogenation
pp. 224-224(1)
Authors: Niemela M.K.; Krause A.O.I.

Mathematical analysis of the catalytic hydrogenating depolymerization of asphaltenes from coal extracts
pp. 224-224(1)
Authors: Stolarski M.; Szczygiel J.

A method of measuring the thermal conductivity of UCMCWS
pp. 224-224(1)
Author: Zhang W.

Novel Mo-containing organometallic compounds as dispersed catalysts for liquefaction and hydropyrolysis of coals
pp. 224-224(1)
Author: Lastra B.

Process for hydroisomerization of waxy hydrocarbon feeds over a slurried catalyst
pp. 224-224(1)
Author: Davis S.M.

The production of hydrocarbons from the hydrogenation of carbon monoxide
pp. 224-224(1)
Author: Quyoum R.

Production of hydrogen and methanol from natural gas with reduced CO₂ emission
pp. 224-224(1)
Author: Steinberg M.

Progress of coal liquefaction technology
pp. 224-224(1)
Author: Saito I.

Recent advances and future prospects for direct coal liquefaction process development
pp. 224-224(1)
Author: Burke F.P.

Results of experimental tests of a process for manufacture of synthetic motor fuels from natural gas
pp. 224-224(1)
Author: Bak V.V.

Review on the technology for improving tar yields by pyrolysis of coal
pp. 225-225(1)
Author: Liao H.

Role of iron catalyst on hydroconversion of aromatic hydrocarbons
pp. 225-225(1)
Authors: Ogata E.; Horie K.

Structural characterization of tar from a coal gasification plant: comparison with a coke oven tar and a crude oil flash-column residue
pp. 225-225(1)
Author: Pindoria R.

Study of the mechanism of ionic hydrogenation of coal using ¹⁴C-Tetralin
pp. 225-225(1)
Author: Chernetskaya N.V.

Study on the coal-water slurry fuel of lignite
pp. 225-225(1)
Author: Yang J.

Synthesis of liquid pitch fluoride by direct fluorination of coal-tar pitch
pp. 225-225(1)
Author: Maeda T.

Theoretical modelling of coliquefaction reactions of coal and polymers
pp. 225-225(1)
Authors: Ades H.F.; Subbaswamy K.R.

Thermodynamics of phase transitions of light and heavy hydrocarbons in the Fischer-Tropsch synthesis
pp. 225-225(1)
Author: Yermakova A.

Waste oils used as solvents for different ranks of coal
pp. 225-225(1)
Author: Orr E.C.

Coal-fired methane reforming for power and chemical plants
pp. 225-225(1)
Author: Feldmann H.F.

Direct catalytic reduction of sulfur dioxide to elemental sulfur
pp. 225-225(1)
Author: Loftus P.J.

Dynamics of gaseous combustion in closed systems with an inert porous medium
pp. 225-225(1)
Author: Korzhavin A.A.

Effect of platinum wire structure on catalytic gas-phase ignition of methane
pp. 226-226(1)
Author: Cohn J.G.

Gas refining system
pp. 226-226(1)
Author: Atsushi T.

Gas-treatment apparatus
pp. 226-226(1)
Author: Maton M.E.G.

Ignition of counterflowing methane versus heated air under reduced and elevated pressures
pp. 226-226(1)
Author: Fotache C.G.

Investigation of low-NO_x strategies for natural gas combustion
pp. 226-226(1)
Author: Ballester J.M.

Laminar burning velocity of coal gases and methane at elevated pressures and temperatures: experiments and modelling
pp. 226-226(1)
Authors: Lauer G.; Leuckel W.

Processing and conditioning of fuel gas
pp. 226-226(1)
Author: Hahn D.

Recovery of vanadium, nickel, and carbon from Orinoco crudes via flexicoking
pp. 226-226(1)
Author: Hepworth M.T.

Removal of H₂S from high-temperature coal-derived gases by zinc-based sorbents
pp. 226-226(1)
Author: Lee T.-J.

The La Bella and Minerva gas discoveries, offshore Otway Basin [Australia]
pp. 226-227(2)
Author: Luxton C.W.

Two-dimensional simulation of the course of subsidence and temperature as well as the methane and nitrogen formation in the northwestern German basin
pp. 227-227(1)
Authors: Neunzert G.H.; Littke R.

Adsorbed natural gas storage with activated carbons made from Illinois coals and scrap tires
pp. 227-227(1)
Author: Sun J.

Decarbonization of fossil fuels: hydrogen as an energy carrier
pp. 227-227(1)
Author: Audus H.

Advanced gas reburning demonstration and commercial gas reburning system upgrade
pp. 227-227(1)
Author: Folsom B.A.

District heating based on natural gas
pp. 227-227(1)
Author: Hansen F.

Gas power production, surplus concepts and the transformation of hydro electric rent into resource rent
pp. 227-227(1)
Author: Amundsen E.S.

Ammonia decomposition in coal gasification atmospheres
pp. 227-227(1)
Author: Chambers A.

Apparatus for coal gasification with prevention of slag deposits
pp. 227-227(1)
Author: Koga Y.

Apparatus for gasification of carbonaceous fuels by partial oxidation
pp. 227-227(1)
Author: Ishigami S.

Apparatus for monitoring slag dropping in coal gasifier
pp. 227-227(1)
Author: Yamada T.

Basic design of the coal gasification system for Korean IGCC application
pp. 227-227(1)
Author: Kim H.T.

Catalyst and process for the manufacture of hydrocarbons from synthesis gas
pp. 227-227(1)
Author: Geerlings J.J.C.

Comparison of the co-gasification and co-combustion of municipal sewage sludges in lignite-fired plants
pp. 228-228(1)
Author: Schiffer H.P.

Development of coal gasification technologies
pp. 228-228(1)
Authors: Szechy G.; Szebenyi I.

Development of specialty chemicals from dimethyl ether
pp. 228-228(1)
Authors: Tartamella T.L.; Lee S.

Direction-variable nozzle used in pressurized coal gasifier
pp. 228-228(1)
Author: Yokohama K.

Flow injection-thermal analysis-mass spectrometry: application to studies of carbon gasification reactions
pp. 228-228(1)
Author: Jones J.M.

Hydrogen production from fossil fuels and other regionally available feedstocks
pp. 228-228(1)
Author: Timpe R.C.

Influence of Gasification Catalyzed by Calcium and Steam Activation on the Porous Structure of Activated Carbons
pp. 228-228(1)
Author: Leboda R.

Light olefins from coal derived syngas
pp. 228-228(1)
Author: Sardesai A.

LPMEOH synthesis using CO₂/CO-rich syngas
pp. 228-228(1)
Author: Gunda A.

Minimum CO₂ emissions from IGCC power plants by methanol production with H₂
pp. 228-228(1)
Author: Pruschek R.

Model of autothermal gasification of high-ash fuel during two-stage combustion in fluidized bed
pp. 228-228(1)
Authors: Belyaev A.A.; Chistov S.F.

New clean fuel from coal. Dimethyl ether
pp. 228-228(1)
Author: Ohno Y.

Novel syngas-based process for methyl methacrylate
pp. 229-229(1)
Author: Gogate M.R.

Process for the conversion of natural gas into higher hydrocarbons
pp. 229-229(1)
Author: De Vries L.

Recent development of a simultaneous sulfur and dust removal process for IGCC power generation system
pp. 229-229(1)
Author: Kamei K.

Simulation of coal gasification in a fluidized bed
pp. 229-229(1)
Authors: Syamlal M.; O'Brien T.J.

Single stage LPDME synthesis using CO₂/CO-rich syngas
pp. 229-229(1)
Authors: Gunda A.; Lee S.

Sintering behavior of fly slag particles in entrained bed coal gasifiers. 2. Production of amorphous slag in laboratory
pp. 229-229(1)
Author: Ueda A.

Studies on the mutagenicity of mild gasification products of coal and their subtractions by the Salmonella/microsomal assay
pp. 229-229(1)
Author: Zhong B.-Z.

The study on gasification reactivity of fly ash from fluidized bed gasifier
pp. 229-229(1)
Author: Fang Y.T.

A study on coal gasification in pressurized drop tube furnace
pp. 229-229(1)
Author: Ahn D.-H.

A study on coal reactivity with a pressurized drop tube furnace
pp. 229-229(1)
Author: Kajitani S.

A study on mineralogical and physical changes in used Indian silica coke oven bricks
pp. 229-229(1)
Author: Daimia M.H.

Suitability of Australian bituminous coals for use in slagging gasifiers
pp. 229-229(1)
Author: Patterson J.H.

Thermogravimetric studies on the global kinetics of carbon gasification in nitrous oxide
pp. 229-229(1)
Author: Teng H.

A thermogravimetric study on char-CO₂ gasification. Part II. Temperature-programmed thermogravimetry
pp. 230-230(1)
Author: Cui H.

Two dimensional reactive flow analysis for coal gasification in a bench scale gasifier
pp. 230-230(1)
Author: Yoo Y.D.

Two-stage spouted-bed coal gasifier
pp. 230-230(1)
Author: Kobayashi Y.

Unified mechanism of alkali and alkaline earth catalyzed gasification reactions of carbon by CO₂ and H₂O
pp. 230-230(1)
Authors: Chen S.G.; Yang R.T.

Water-cooling apparatus for slag hole of slag-tapped coal gasifier
pp. 230-230(1)
Author: Koga Y.

Activated carbon, and manufacture of granular activated carbon from coal
pp. 230-230(1)
Author: Yashino Y.

Adsorption of SO₂ on bituminous coal char and activated carbon fiber
pp. 230-230(1)
Author: DeBarr J.

Bituminous coal fly ash. A filler for asphalt highway construction
pp. 230-230(1)
Authors: Boehm S.; Suss G.

Catalytic processing of coal and biomass to carbon materials
pp. 230-230(1)
Author: Kuznetsov B.N.

Coal based activated carbon manufacturing process
pp. 230-230(1)
Author: Kim S.C.

Coal-based activated carbons prepared with organometallics and their mesoporous structure
pp. 230-230(1)
Author: Yashizawa N.

Comparisons among magnetic and nonmagnetic fly ash fractions: strength development of cement fly ash mortars
pp. 230-230(1)
Author: Paya J.

Decorative glass made from fly ash
pp. 230-230(1)
Author: Hua X.

Effect of carbonization conditions and metallic catalysts on micropore structure of coal chars
pp. 230-230(1)
Author: Xu X.

Effect of sintering temperature on the characteristics of carbons based on mesocarbon microbeads
pp. 231-231(1)
Author: Bhatia G.

Effects of carbon on air entrainment in fly ash concrete: the role of soot and carbon black
pp. 231-231(1)
Author: Gao Y.-M.

Effects of heating rate on coal carbonization-(II)
pp. 231-231(1)
Author: Yamashita Y.

Efficient use of phenolic tar
pp. 231-231(1)
Author: Musavirov R.S.

Evaluation of the consistency of fresh mortars and concretes containing bituminous coal fly ashes by various procedures
pp. 231-231(1)
Authors: Freimann T.; Wierig H.J.

Field studies of fly ash concrete structures containing reactive aggregates
pp. 231-231(1)
Author: Thomas M.D.A.

Friction and abrasion resistance of cast aluminium alloy-fly ash composites
pp. 231-231(1)
Author: Rohatgi P.K.

Incorporation of fly ashes in cold-stabilized clay products
pp. 231-231(1)
Author: Temimi M.

Iron oxidation state and its effect on ash particle stickiness
pp. 231-231(1)
Authors: Bool L.E.; Helble J.J.

Isolation of humic acids from leonardite
pp. 231-231(1)
Author: Shah S.B.

Low-cost pitch-based CFRC
pp. 231-231(1)
Author: Hajek M.

Manufacture of hydraulic cements with high fly ash content for strength and durability against freezethaw action
pp. 231-231(1)
Author: Pildysh M.

Modeling of coal conversion in a carbonizer
pp. 231-231(1)
Author: Syamlal M.

New knowledge about effects of bituminous coal fly ash in concrete
pp. 232-232(1)
Author: Haerdtl R.

Performance and durability of concrete made with demolition waste and artificial fly ash-clay aggregates
pp. 232-232(1)
Authors: Zakaria M.; Cabrera J.G.

Pitch mesophase and a new type of high strength carbon material
pp. 232-232(1)
Authors: Xia J.; Zhou S.

Potential use of fly ash in Colombian blended cements
pp. 232-232(1)
Authors: de Gutierrez R.M.; Delvasto S.A.

Preparation and characterization of mesophase pitches as a matrix precursor of carbon fiber reinforced carbon composite
pp. 232-232(1)
Authors: Chung H.J.; Lim Y.S.

Preparation and testing of experimental batch of activated carbon
pp. 232-232(1)
Author: Drozdnik I.D.

Preparation of activated carbons from bituminous coals with CO₂ activation-influence of coal oxidation.
pp. 232-232(1)
Author: Tong H.

Research on fly ash in China--its properties and engineering use
pp. 232-232(1)
Author: Fan W.

Sintering characteristics of low-rank coal ashes
pp. 232-232(1)
Author: Jung B.

Sintering of powders of polyaromatic mesophase to high-strength isotropic carbons. 111. Powders based on an iron-catalyzed mesophase synthesis
pp. 232-232(1)
Authors: Braun M.; Huettinger K.J.

Strength of compacting mortar and concrete containing of micro grinding-high volume fly ash
pp. 232-232(1)
Author: Tashiro C.

Studies on the synthesis of ZSM-5 molecular sieve using dacite and fine coal ash
pp. 232-232(1)
Author: Jiao Q.

Study of the aperture material made from fly ash
pp. 232-232(1)
Authors: Wang L.; Xiang H.

Study on structure characteristics and computational method of coal ash melts
pp. 232-232(1)
Authors: Xiong Y.; Sun X.

Sulfate resistance of concrete containing fly ash
pp. 232-232(1)
Author: Schiessl P.

Synthesis of -Sialon powder from fly ash
pp. 233-233(1)
Author: Choi H.S.

Thermal behavior of extrographic fractions of coal tar and petroleum pitches
pp. 233-233(1)
Author: Bermejo J.

The use of fly ash to improve the sulfate resistance of concrete
pp. 233-233(1)
Authors: Plowman C.; Cabrera J.G.

Utilization of class C fly ash for soil improvement
pp. 233-233(1)
Author: Misra A.

Utilization of fly ashes for production of limes and products
pp. 233-233(1)
Author: Karpow W.

Analysis of the steam generator for the safe integral reactor concept: 1 steady state
pp. 233-233(1)
Authors: Kuridan R.M.; Beynon T.D.

Analysis of the steam generator for the safe integral reactor concept: II. a linearized non-steady state model
pp. 233-233(1)
Authors: Kuridan R.M.; Beynon T.D.

Core loading pattern optimization for research reactors
pp. 233-233(1)
Author: Mahlers Y.P.

Exploring the Dodewaard type-I and type-II stability; from start-up to shut-down, from stable to unstable
pp. 233-233(1)
Author: Van der Hagen

Fast neutron source reactor, YAYOI
pp. 233-233(1)
Author: Oka Y.

Fuzzy gain scheduling of velocity p1 controller with intelligent learning algorithm for reactor control
pp. 233-233(1)
Authors: Kim D.Y.; Seong P.H.

Investigation of thermal margin in an advanced PWR core loaded with hexagonal fuel assembly
pp. 233-233(1)
Author: Hwang D.-H.

Modification to technique using two detectors for assay of radioactive waste drum
pp. 234-234(1)
Author: Dung T.Q.

Operational experiences of fast neutron source reactor 'YAYOI' as a pulsed fast reactor
pp. 234-234(1)
Author: Wakabayashi H.

The optimum operating conditions of the phased double-rotor facility at the ET-RR-1 reactor
pp. 234-234(1)
Author: Naguib K.

Reactivity oscillations in a point reactor
pp. 234-234(1)
Author: Ravetto P.

Simulation modelling for dynamic performance studies in a channel model of a supercritical-pressure, direct cycle light water reactor
pp. 234-234(1)
Author: Sultan M.

Water level monitoring after shutdown using neutron and gamma flux measurements in PWR
pp. 234-234(1)
Authors: Kodeli I.; Bignan G.

Comparison of environmental risk between coal and nuclear power in China
pp. 234-234(1)
Authors: Fang D.; Li H.

Conceptual design study of advanced power reactors
pp. 234-234(1)
Authors: Oka Y.; Koshizuka S.

Radioactivity measurements of coals and ashes from coal-fired power plants in the south-western part of turkey
pp. 234-234(1)
Authors: Aycik G.A.; Ercan A.

Adaptation of a one megawatt molten carbonate fuel cell system
pp. 234-234(1)
Author: He W.

All in a spin
pp. 234-234(1)
Author: David J.

Applications of artificial intelligence in power systems
pp. 234-234(1)
Authors: Madan S.; Bollinger K.E.

Carbonaceous anodes for secondary nonaqueous batteries, their manufacture, and the batteries
pp. 235-235(1)
Author: Saito K.

Carbons prepared from coals for anodes of lithium-ion cells
pp. 235-235(1)
Author: Zheng T.

Challenges in electrical power measurements of adjustable speed drives and motors
pp. 235-235(1)
Authors: Domijan A.; Czarkowski D.

Characterization of a thyristor controlled reactor
pp. 235-235(1)
Authors: Parihar P.; Karady G.G.

Comparative assessment of the effect of dynamic load models on voltage stability
pp. 235-235(1)
Author: Prasad G.D.

A complete set of automatic compensation equipment of a capacitive charging current in the application of a medium-voltage power system
pp. 235-235(1)
Author: Yi T.

Computational voltage stability assessment of large-scale power systems
pp. 235-235(1)
Authors: Nallan H.C.; Rastgoufard P.

The connection between modal analysis and electric torque analysis in studying the oscillation stability of multimachine power systems
pp. 235-235(1)
Authors: Swift F.J.; Wang H.F.

Development on coal gas production technology acceptable for fuel cells
pp. 235-235(1)
Author: Watanabe T.

A direct approach to short-circuit current calculation without using symmetrical components
pp. 235-235(1)
Authors: Teo C.Y.; He W.X.

Effect of deregulation on hydrothermal systems with transmission constraints
pp. 235-235(1)
Author: Ferrero R.W.

Efficient electric energy utilization enhancement using modulated smart power filters
pp. 235-235(1)
Author: Sharaf A.M.

EMTP models for simulation of shunt reactor switching transients
pp. 235-235(1)
Author: Prikler L.

Focus on motors and drives
pp. 235-235(1)

A general-purpose transmission line model and its interface with an electromagnetic transients programme
pp. 236-236(1)
Author: de Barros M.T.C.

Hopf bifurcation control in power systems with static var compensators
pp. 236-236(1)
Author: Laufenberg M.J.

Impact of electromagnetic field management on the design of 500 kV transmission lines
pp. 236-236(1)
Author: Farag A.S.

Impacts of pertinent factors on reliability worth indices in an electric power system
pp. 236-236(1)
Authors: Goel L.; Billinton R.

The implementation and effectiveness of linear interpolation within digital simulation
pp. 236-236(1)
Author: Kuffel P.

Improved genetic algorithms for optimal power flow under both normal and contingent operation states
pp. 236-236(1)
Author: Lai L.L.

Independent steam-electric power plants in the Anthracite region, NE Pennsylvania: site geology, coal-refuse bank utilization, and environmental benefits
pp. 236-236(1)
Author: Inners J.D.

Inside cable tray--Part IV
pp. 236-236(1)
Authors: Valvoda F.R.; Farrell G.W.

Loop testing in the presence of RCDs
pp. 236-236(1)
Author: Jones D.

Networking in harmony
pp. 236-236(1)
Author: Forrester W.

Numerical analysis of molten carbonate fuel cell systems
pp. 236-236(1)
Author: He W.

An optimal real-time short term operation of independent hydro generator company in the open electricity market
pp. 236-236(1)
Authors: Tufegdzic N.; Hyslop P.

Performance of a model treble-tripler saturated reactor
pp. 237-237(1)
Author: O'Kelly D.

Phase-domain multiphase transmission line models
pp. 237-237(1)
Author: Castellanos F.

Polymer electrodes based on carbonaceous compounds for solid-state rechargeable batteries. 1. Effect of green coke on the microstructure of polyether mixtures
pp. 237-237(1)
Authors: Oleda M.C.; Acosta J.L.

Power systems cyclic security analysis
pp. 237-237(1)
Author: Harsan H.

Practical guide to electrical engineering for HVA-CandR engineers
pp. 237-237(1)
Author: Cowern E.H.

Setting a static uninterruptible power supply
pp. 237-237(1)
Author: Palko E.

A simple and efficient method for including frequency-dependent effects in transmission line transient analysis
pp. 237-237(1)
Author: Ametani A.

Single vs multicore cabling
pp. 237-237(1)
Author: Lamb L.

Small office UPS. Surge of interest
pp. 237-237(1)
Author: Dawn T.

Speed deviation driven adaptive neural network based power system stabilizer
pp. 237-237(1)
Author: El-Sherbiny M.K.

Stability analysis of MHD disk generators and application to power systems with CO₂ recovery
pp. 237-237(1)
Author: Ishikawa M.

Variable interest
pp. 237-237(1)
Author: David J.

A decision analysis approach to the transaction selection problem in a competitive electric market
pp. 237-237(1)
Authors: Kumar J.; Sheble G.

The economic theory of regulation versus alternative theories for the electric utilities industry: a simultaneous probit model
pp. 237-237(1)
Author: Upadhyaya K.P.

Electric industry governance: reconciling competitive power markets and the physics of complex transmission interconnections
pp. 237-237(1)
Author: Stalon C.G.

Electrical energy and cost savings potential at DOD facilities
pp. 238-238(1)
Author: Konopacki S.J.

Electricity market integration in the Pacific Northwest
pp. 238-238(1)
Author: Woo C.-K.

Electricity restructuring and regional air pollution
pp. 238-238(1)
Authors: Palmer K.; Burtraw D.

Electricity supply reliability--estimating the value of lost load
pp. 238-238(1)
Authors: Willis K.G.; Garrod G.D.

Emission constrained secure economic dispatch
pp. 238-238(1)
Author: Arya L.D.

Energy conservation and organization of electricity supply in the Netherlands
pp. 238-238(1)
Author: Slingerland S.

Energy efficiency vs economic efficiency?--New Zealand electricity sector reform in the context of the national energy policy objective
pp. 238-238(1)
Author: Gunn C.

Improving private incentives for electric grid investment
pp. 238-238(1)
Authors: Bushnell J.B.; Stoft S.E.

Institutional and programmatic suggestions for satisfying public policy responsibilities in a retail competitive electric industry
pp. 238-238(1)
Authors: Tonn B.E.; Schweitzer M.

Investment planning for electricity generation expansion
pp. 238-238(1)
Authors: Pokharel S.; Ponnambalam K.

Low-voltage directive. Confused you will be
pp. 238-238(1)

Market power and strategic interaction in electricity networks
pp. 238-239(2)
Author: Cardell J.B.

Priority pricing in electricity supply: an application for Israel
pp. 239-239(1)
Authors: Beenstock M.; Goldin E.

Rural electrification in Tanzania--constructive use of project appraisal
pp. 239-239(1)
Authors: van den Broek R.; Lemmens L.

Simulating electricity restructuring in California: interactions with the regional market
pp. 239-239(1)
Author: Kahn E.

Transition costs: estimation, sensitivities, and recovery
pp. 239-239(1)
Author: Hirst E.

Advanced liquid fuel production from biomass for power generation
pp. 239-239(1)
Author: Grassi G.

Bio-fuel oil combustion in a 0.5 MW furnace
pp. 239-239(1)
Author: Barbueci P.

Biomass conversion processes
pp. 239-239(1)
Authors: Kucuk M.M.; Demirbas S.

A biomass energy flow chart for Zimbabwe: an example of the methodology
pp. 239-239(1)
Authors: Hemstock S.L.; Hall D.O.

Biomass yield and energy value of some fast-growing multipurpose trees in Nigeria
pp. 239-239(1)
Authors: Fuwape J.A.; Akindele S.O.

Biomass-derived oxygenates for transportation fuels
pp. 240-240(1)
Author: Wyman C.E.

Calculation of higher heating values of biomass fuels
pp. 240-240(1)
Author: Demirbas A.

Carbohydrate biofuels. I. Rootfuel studies in Mexico, Brazil, Zimbabwe and India
pp. 240-240(1)
Authors: Shultz E.B.; Bragg W.G.

Characteristics and availability of biomass waste and residues in the Netherlands for gasification
pp. 240-240(1)
Author: Faaij A.

Co-combustion of miscanthus in a pulverised coal combustor: experiments in a droptube furnace
pp. 240-240(1)
Authors: Wagenaar B.M.; Van Den Heuvel E.J.M.T.

Co-processing of agricultural and biomass waste with coal
pp. 240-240(1)
Author: Stiller A.H.

Comparative study of biogas production from different waste materials
pp. 240-240(1)
Authors: Mandal T.; Mandal N.K.

Concentrations of inorganic elements in biomass fuels and recovery in the different ash fractions
pp. 240-240(1)
Author: Obfruberger I.

Effects on SO_x and NO_x emissions by co-firing straw and pulverized coal
pp. 240-240(1)
Author: Pederson L.S.

Industrial use of biomass energy in Sri Lanka
pp. 240-240(1)
Authors: Tariq A.S.; Purvis M.R.I.

The inorganic chemistry of the combustion of aspen wood with added sulfur
pp. 240-241(2)
Author: Blander M.

The inorganic chemistry of the combustion of wheat straw
pp. 241-241(1)
Authors: Blander M.; Pelton A.D.

Kinetic NO_x modelling and experimental results from single wood particle combustion
pp. 241-241(1)
Author: Skreiberg O.

Life cycle analysis of biofuels under different environmental aspects
pp. 241-241(1)
Author: Kaltschmitt M.

Liquefaction of biomass in the presence of phenol and H₂O using alkalis and salts as the catalyst
pp. 241-241(1)
Authors: Maldas D.; Shiraisri N.

Modeling biomass pyrolysis kinetics and mechanisms
pp. 241-241(1)
Author: Chen Y.

Polycyclic aromatic hydrocarbons in catalytically upgraded biomass pyrolysis oils
pp. 241-241(1)
Authors: Williams P.T.; Horne P.A.

Processing and utilizing urban wood waste and pallets for fuel
pp. 241-241(1)
Author: Smith M.L.

Properties of Danish biofuels and the requirements for power production
pp. 241-241(1)
Author: Sander B.

Relating catalytic coal or biomass gasification mechanisms to plant capital cost components
pp. 241-241(1)
Author: Hauserman W.B.

Removal of inorganic constituents of biomass feedstocks by mechanical dewatering and leaching
pp. 241-241(1)
Author: Turn S.Q.

The role of biomass as an energy carrier of the future
pp. 242-242(1)
Author: van der Burgt M.J.

The socio-economic analysis of fuelwood consumption with the principal components analysis in Turkey
pp. 242-242(1)
Authors: Turker M.F.; Turker E.S.

Steam gasification of almond shells in a fluidised bed reactor: the influence of temperature and particle size on product yield and distribution
pp. 242-242(1)
Authors: Rapagna S.; Latie A.

Use of amino phase adsorbent for biomass tar sampling and separation
pp. 242-242(1)
Author: Brage C.

Will Swedish biomass be sufficient for future transportation-fuel demands?
pp. 242-242(1)
Author: Johansson B.

Willow firing in retrofitted Irish peat power plants
pp. 242-242(1)
Author: Van Den Broek R.

Advances in geothermal energy use
pp. 242-242(1)
Authors: Kilkis I.B.; Eltez M.E.

Finite time analysis of a geothermal heat engine driven air conditioning system
pp. 242-242(1)
Authors: Davis G.W.; Wu C.

Geothermal energy in the lie-de-France
pp. 242-242(1)
Author: Lemale J.

Geothermal heat, fuel oil and gas heat 30,000 dwellings
pp. 242-242(1)

Influence of water recharge on heat transfer in a semi-infinite aquifer
pp. 242-242(1)
Authors: Mongelli F.; Pagliarulo P.

Thermal analysis of indirect geothermal district heating systems
pp. 242-242(1)
Author: Chuanshan D.

Using heat from a depth of 1500 metres
pp. 242-242(1)
Author: Oppermann G.

a-Si:H/a-Si:H stacked cell from VHF-deposition in a single chamber reactor with 9% stabilized efficiency
pp. 243-243(1)
Author: Platz R.

Bond graph modelling and simulation of spice-pounding machines fed from a photovoltaic source
pp. 243-243(1)
Author: Madansure V.N.

Computer modelling of current matching in a-Si:H/a-Si:H-tandem solar cells on textured TCO substrates
pp. 243-243(1)
Author: Zeman M.

Constant delivery temperature solar water heater--an integrated approach
pp. 243-243(1)
Authors: Kumar S.; Kumar N.

Continuous low-temperature dry carbonization of coal by solar energy
pp. 243-243(1)
Author: Wang Z.

CSHPSS systems in Greece: test of simulation software and analysis of typical systems
pp. 243-243(1)
Author: Argiriou A.A.

Effect of solar collector design parameters--on the operation of solar Stirling power system
pp. 243-243(1)
Author: Singh N.

Effects of auxiliary heater on annual performance of thermosyphon solar water heater simulated under variable operating conditions
pp. 243-243(1)
Authors: Shariah A.M.; Lof G.O.G.

European solar radiation atlas. Solar radiation on horizontal and inclined surfaces
pp. 243-243(1)
Authors: Palz W.; Greif J.

Experimental performance of built-in-storage solar water heating systems in laboratory and field conditions
pp. 243-243(1)
Author: Sodha M.S.

Heat transfer and fluid flow studies in the collector tubes of a closed-loop natural circulation solar water heater
pp. 243-243(1)
Author: Siddiqui M.A.

High efficiency solar air heater
pp. 243-244(2)
Author: Mohamad A.A.

Hydrogen production with solar energy
pp. 244-244(1)
Author: Olgun H.

Methods of testing to determine the thermal performance of flat plate solar collectors containing boiling liquid
pp. 244-244(1)

Microprocessor based load voltage regulator for photovoltaic systems
pp. 244-244(1)
Authors: Anis W.R.; El-Samahy A.E.-S.M.

Modelling a permanent magnet DC motor/centrifugal pump assembly in a photovoltaic energy system
pp. 244-244(1)
Author: Suehrcke H.

Modelling, optimisation and performance evaluation of a parabolic trough solar collector steam generation system
pp. 244-244(1)
Author: Kalogirou S.

MS₂ (M = W, Mo) Photosensitive thin films for solar cells
pp. 244-244(1)
Author: Gourmelona E.

Multi-region solar cell modeling
pp. 244-244(1)
Authors: Pfleiderer H.; Bullemer B.

A new model of very high efficiency buried emitter silicon solar cell
pp. 244-244(1)
Author: Bouazzi A.S.

n-Si/SnO₂ junctions based on macroporous silicon for photoconversion
pp. 244-244(1)
Author: Cacheta H.

Object-oriented modeling of solar heating systems
pp. 244-244(1)
Author: Franke R.

Opposite sunspaces passive solar air heating system
pp. 244-244(1)
Author: Tan M.

Optimal sizing of photovoltaic systems in varied climates
pp. 244-244(1)
Author: Samimi J.

Optimization of solar pond electrical power generation system
pp. 244-245(2)
Author: Khalil R.A.H.

The optimization of a holographic system for solar power generation
pp. 245-245(1)
Author: Ludman J.E.

The Oxford photovoltaic house
pp. 245-245(1)
Authors: Roaf S.; Fuentes M.

PVs in the built environment
pp. 245-245(1)
Authors: Bates J.; Munro D.

'Quick' models for tsbi 13 and Kviksol
pp. 245-245(1)
Authors: Wittchein K.B.; Jeinsen S.O.

Radiative heat transfer in a solar air heater covered with a plastic film
pp. 245-245(1)
Authors: Jannot Y.; Coulibaly Y.

Results of the solar cell experiment of the first Brazilian satellite
pp. 245-245(1)
Author: Veissid N.

A simple fabrication process for 20% efficient silicon solar cells
pp. 245-245(1)
Author: Hubner A.

Simulated performance of thermal storage in a solar cooker
pp. 245-245(1)
Author: Nyahoro P.K.

Solar cell activities in Denmark
pp. 245-245(1)
Author: Katdic I.

Solar conversion parameters of graded base silicon solar cells
pp. 245-245(1)
Author: Gangadhar R.B.

Solar cooker with latent heat storage: design and experimental testing
pp. 245-245(1)
Authors: Buddhi D.; Sahoo L.K.

Solar energy augmentation of a carnalite solar pond using inverted trickle collectors
pp. 245-245(1)
Author: Jubran B.A.

Solar process heat generation using an ETC collector field with external parabolic circle concentrator (PCC) to operate an adsorption refrigeration system
pp. 245-245(1)
Author: Niemann M.

Study of charging of stratified storage tanks with finite wall thickness
pp. 246-246(1)
Authors: Ghaddari N.K.; Al-Maarafie A.M.

Thermosyphon solar water heaters: effect of storage tank volume and configuration on efficiency
pp. 246-246(1)
Author: Hasan A.

Time for solar
pp. 246-246(1)

The world's largest solar heating system
pp. 246-246(1)
Author: Ulbjerg F.

Yield optimisation of thermal solar systems through modulated functioning temperature difference
pp. 246-246(1)
Author: Bohringer V.

Capacity factor of wind turbines
pp. 246-246(1)
Authors: Abed K.A.; All-Mallah A.A.

Dynamic simulation of hybrid wind-diesel power generation system with superconducting magnetic energy storage
pp. 246-246(1)
Author: Tripathy S.C.

Load frequency control of isolated wind-diesel hybrid power systems
pp. 246-246(1)
Author: Bhatti T.S.

Renewable energy finance and project ownership--the impact of alternative development structures on the cost of wind power
pp. 246-246(1)
Author: Wiser R.H.

Technical-economic optimization of a wind power plant by means of a stochastic analytical model
pp. 246-246(1)
Authors: Fortunato B.; Mummolo G.

Wind power--the prospects post-1998
pp. 246-246(1)
Author: Hartnell G.

Assessment of transmission cost recovery applying marginal pricing in hydrothermal power systems
pp. 246-246(1)
Author: Mello J.C.

Corrosion problems resulting from the use of alternative fuels
pp. 246-246(1)
Author: Heimgartner P.

The cost estimate for a novel cheap solar cell
pp. 246-247(2)
Author: Li J.

Domestic biomass burning in rural and urban Zimbabwe--part A
pp. 247-247(1)
Author: Marufu L.

Experimental results of thermal utilization of wastes and renewable raw materials in circulating fluidized-bed firings
pp. 247-247(1)
Author: Bernstein W.

Focus on Papyron
pp. 247-247(1)
Author: Hofer B.

Fuelwood utilization in Brazil
pp. 247-247(1)
Author: Brito J.O.

Greenhouse gas emissions from hydropower
pp. 247-247(1)
Authors: Gagnon L.; van de Vate J.F.

Power production based on biofuels
pp. 247-247(1)
Authors: Nielson L.; Nielsen C.

Price trends in the Swedish wood-fuel market
pp. 247-247(1)
Author: Hillring B.

Promotion of renewable energy technologies in Tanzania
pp. 247-247(1)
Author: Kassenga G.R.

Regional income effects and renewable fuels--increased usage of renewable energy sources in Danish rural areas and its impact on regional incomes
pp. 247-247(1)
Authors: Bentzen J.; Smith V.

Renewable energy technologies in the Caribbean
pp. 247-247(1)
Author: Headley O.

Renewables--a major contribution
pp. 247-247(1)
Author: Loram G.

Renewables--about to make a major contribution?
pp. 247-247(1)
Author: Loram G.

The status of renewable energies in Denmark
pp. 247-247(1)
Author: Elvang A.G.

Using micro-hydropower in the Zairian village
pp. 248-248(1)
Author: Thornbloom M.

Apparatus for wet desulfurization of coal-fired boiler flue gases
pp. 248-248(1)
Authors: Kawamura K.; Ishige A.

Cofiring wood waste and coal in cyclone boilers: test results and prospectus
pp. 248-248(1)
Author: Tilman D.

Combustion of Kansk-Achinsk coals in boilers and prospects for its future use
pp. 248-248(1)
Author: Pronin M.S.

Desulfurization of combustion gases in fluidized-bed boilers
pp. 248-248(1)
Author: Przybylski L.

Ecological effectiveness of staged combustion of Kuznetsk coal
pp. 248-248(1)
Author: Arkhipov A.M.

Economic viability and design of a fully automated boiler operation at Central Azucarera Don Pedro
pp. 248-248(1)
Author: Nicolas D.F.

Evolutionary changes in furnace combustion conditions which affect ash deposition in modern boilers
pp. 248-248(1)
Author: Fitzgerald D.

Heat transfer optimization of a district heating system using search methods
pp. 248-248(1)
Authors: Baker D.K.; Sherif S.A.

Manufacture of boiler fuel by hydrogenation of Borodino-field brown coal in the presence of a molybdenum catalyst under a pressure of 6 MPa
pp. 248-248(1)
Author: Yolin M.K.

Methane de-NOX process as a NO_x reduction technology for stoker boilers
pp. 248-248(1)
Author: Rabovitser I.

Optimization of conditions and systems for fuel oil-free firing-up of steam boilers
pp. 248-248(1)
Author: Dering I.S.

A profile in environmental compliance--Birmingham's coal-fired steam system
pp. 248-248(1)
Author: Dambach D.

Solidification treatment of coal ashes in waste-waters from boiler flue gas desulfurization
pp. 248-248(1)
Author: Komuro T.

Split stream boilers for high-temperature high-pressure topping steam turbine combined cycles
pp. 249-249(1)
Author: Rice I.G.

Upper furnace natural gas injection for NO_x reduction in utility boilers
pp. 249-249(1)
Authors: Hura H.S.; Breen B.P.

Analysis of the flame formed during oxidation of pulverized coal by an O₂-CO₂ mixture
pp. 249-249(1)
Author: Nozaki T.

Analysis of wall heat fluxes, reaction mechanisms, and unburnt hydrocarbons during the head-on quenching of a laminar methane flame
pp. 249-249(1)
Authors: Popp P.; Baum M.

Ash transformations in the real-scale pulverized coal combustion of South African and Colombian coals
pp. 249-249(1)
Author: Lind T.

Burning process diagnostics
pp. 249-249(1)
Author: Cech B.

Catalytic influence of inorganic substances on the pyrolysis of different ranks coals
pp. 249-249(1)
Authors: Tamko V.A.; Shevkoplias V.N.

Characteristics of an ash grain remaining after combustion of a CWM droplet
pp. 249-249(1)
Author: Matsue T.

Characteristics of coal burned in thermal power plants and ash-slag
pp. 249-249(1)
Authors: Vdovehenko V.S.; Yushina G.D.

Coal waste cofiring: international survey of combustion practices
pp. 249-249(1)
Author: Harding N.S.

Combustion tests with Yugoslavian coals--comparison with the IEA model
pp. 250-250(1)
Author: Grubor B.D.

Comparison of two co-combustion concepts for sewage sludge and powdered coal firing systems
pp. 250-250(1)
Author: Spliethoff H.

Development of pressurized coal partial combustor
pp. 250-250(1)
Author: Watanabe A.

Disposal characteristic of paper-making sludge and wastewater coal mud by incineration in fluidized bed
pp. 250-250(1)
Author: Zhang W.

Effects of surface voids on burning rate measurements of pulverized coal at diffusion-limited conditions
pp. 250-250(1)
Author: Bayless D.J.

Effects of variable partial premixing on turbulent jet flame structure
pp. 250-250(1)
Author: Lee T.-W.

Extinction of turbulent diffusion flames by Kolmogorov microscale turbulence
pp. 250-250(1)
Author: Yoshida A.

Flame and droplet interaction effects during droplet-stream combustion at zero Reynolds number
pp. 250-250(1)
Authors: Leiroz A.J.K.; Rangel R.H.

Flame and flow characteristics of double concentric jets
pp. 250-250(1)
Author: Huang R.F.

Hierarchical control scheme for chain-grate stoker coal combustion
pp. 250-250(1)
Author: MacConnell P.F.

Ignition and combustion of aluminum in oxygen/nitrogen mixture streams
pp. 250-250(1)
Author: Yuasa S.

Infrared fiber-optic diagnostic observations of solid propellant combustion
pp. 250-250(1)
Author: Wormhoudt J.

The interaction of liquid reacting droplets with the pulsating flow in a Rijke-tube combustor
pp. 251-251(1)
Author: Carvalho J.A.

Kinetic study of pulverized coal combustion at high pressure using a shock tube
pp. 251-251(1)
Author: Banin V.E.

Laboratory research of combustion process of shale from the Volga River region
pp. 251-251(1)
Authors: Belyaev A.A.; Mal'kova V.V.

Measurements and modelling of gas temperatures and irradiation of a 270 MW pulverized-coal-fired furnace under different firing conditions
pp. 251-251(1)
Authors: Biede O.; Lund J.S.

On the mechanism of sulfur capture during coal briquette combustion
pp. 251-251(1)
Author: Xin L.

Melting combustor with small heat loss and slag jam prevention
pp. 251-251(1)
Author: Tanaka M.

Modeling combustion and fly ash production in a pulverized coal-fired furnace
pp. 251-251(1)
Author: Chandratre A.K.

A numerical study of ignition in the supersonic hydrogen/air laminar mixing layer
pp. 251-251(1)
Authors: Nishioka M.; Law C.K.

Optimization of the dual cycle considering the effect of combustion on power
pp. 251-251(1)
Author: Chen X.-Y.

On primary converter for the monitoring device for incomplete carbon combustion and its characteristics
pp. 251-251(1)
Authors: Platonov V.V.; Grechko V.V.

Progress in pressurized fluidized bed combustion (PFBC) filter cakes and filter cleaning
pp. 251-251(1)
Author: Smith D.H.

Pulverizer air flow measurement aids combustion optimization
pp. 251-251(1)
Author: Taft C.W.

Pyrolysis of Egyptian Maghara pulverized coal particles
pp. 251-252(2)
Author: Ibrahim S.M.A.

Pyrolysis, in a centrifugal field, of coals moistened under various conditions
pp. 252-252(1)
Author: Saranchuk V.I.

Quality of combustion processes--an assessment
pp. 252-252(1)
Authors: Noskievic P.; Ochodek T.

Radiation extinction limit of counterflow premixed lean methane-air flames
pp. 252-252(1)
Author: Guo H.

Reactivation of sorbent containing unreacted calcium oxide embodied in spent ash generated in combustor of sorbent-containing fossil fuel
pp. 252-252(1)
Author: Chiu J.

A relationship between the kinetic parameters of char combustion and the coal's properties
pp. 252-252(1)
Author: Fu W.B.

Relative rate of combustion of volatiles and coke residue particles during combustion of low-grade fuels and combustible wastes in a fluidized bed
pp. 252-252(1)
Author: Borodulya A.V.

Release of inorganic material during coal devolatilization
pp. 252-252(1)
Author: Baxter L.L.

Silica fines from included quartz in pulverized coal combustion
pp. 252-252(1)
Author: ten Brink H.M.

Soot formation in laminar premixed ethylene/air flames at atmospheric pressure
pp. 252-252(1)
Author: Xu F.

Soot formation modeling for turbulent flames
pp. 252-252(1)
Author: Said R.

Soot volume fraction and temperature measurements in laminar nonpremixed flames using thermocouples
pp. 252-252(1)
Author: McEnally C.S.

Statistical pyrometric sizing of particles in fluidised bed combustion
pp. 252-252(1)
Author: Heino P.

Strengthen flame stability during the furnace's load decrease
pp. 253-253(1)
Author: Zhiguo Z.

Studies of fly ash and ash deposits from an AFBC system
pp. 253-253(1)
Author: Xie W.

A study on the combustion and environmental characteristics of CWM fuel
pp. 253-253(1)
Author: Chung J.-D.

Study on the factors affecting coal combustion by a shapeless pore model
pp. 253-253(1)
Author: Zhang X.

Temperatures in a fuel particle burning in a fluidized bed: the effect of drying, devolatilization, and char combustion
pp. 253-253(1)
Author: Winter F.

Water-cooled LDV probe for laser velocimetry in semi-industrial flames
pp. 253-253(1)
Author: Dugue J.

Air extraction in a gas turbine for integrated gasification combined cycle: experiments and analysis
pp. 253-253(1)
Author: Kapat J.

Butanol--a single cylinder engine study: engine performance
pp. 253-253(1)
Author: Alasfour F.N.

Characteristics of a CO₂-recovering combined cycle power generation system when its CO₂ recovery rate is changed
pp. 253-253(1)
Authors: Pak P.S.; Suzuki Y.

Closed-loop control stability for permanent magnet synchronous motor
pp. 253-253(1)
Author: Faiz J.

Development of cumulative and availability rate balances in a multi-cylinder turbocharged indirect injection diesel engine
pp. 254-254(1)
Authors: Rakopoulos C.D.; Giakoumis E.G.

Development of gas turbine combustor fed with bio-fuel oil
pp. 254-254(1)
Author: Ardy P.L.

Effect of temperature on the droplet size in a diesel spray
pp. 254-254(1)
Author: Amara S.

Emerging power technologies and oxide scale spallation
pp. 254-254(1)
Author: Starr F.

Exergetic evaluation of gas turbine cogeneration systems for district heating and cooling
pp. 254-254(1)
Authors: Pak P.S.; Suzuki Y.

Exergetic evaluation of methods for improving power generation efficiency of a gas turbine cogeneration system
pp. 254-254(1)
Authors: Pak P.S.; Suzuki Y.

A generalised model of a real heat engine and its performance
pp. 254-254(1)
Author: Chen L.

Improved load-frequency control with capacitive energy storage
pp. 254-254(1)
Author: Tripathy S.C.

The momentum turbine: a gravitational energy system
pp. 254-254(1)
Author: Sen A.K.

Next-generation integration concepts for air separation units and gas turbines
pp. 254-254(1)
Author: Smith A.R.

On the comparison between a detailed turbine-generator EMTP simulation and corresponding field test results
pp. 254-255(2)
Author: Khodabakhchian B.

Optimum performance of a corrugated, collector-driven, irreversible Carnot heat engine and absorption refrigerator
pp. 255-255(1)
Authors: Goktun S.; Ozkaynak S.

Process for supplying nitrogen in power generation with coal gasification and gas turbine
pp. 255-255(1)
Authors: Wada K.; Kojima H.

A review of the effect of particulate traps on the efficiency of vehicle diesel engines
pp. 255-255(1)
Author: Stamatelos A.M.

A study of thermochemically recuperative power generation systems using natural gas
pp. 255-255(1)
Author: de Souza-Santos M.L.

Aspects of power plant and oxygen plant integration with COREX plants
pp. 255-255(1)
Authors: Smith A.R.; Harbison J.

Carbothermic smelting of converter slags from mattes for recovery of metal values
pp. 255-255(1)
Authors: Hayman D.A.; Denton G.M.

Characteristics of tuyere coke and blast furnace operation
pp. 255-255(1)
Authors: Chen B.; Shemn H.

Coals and coal requirements for the COREX process
pp. 255-255(1)
Author: Heckmann H.

Combined (integrated) COREX ironmaking and DRI production technologies
pp. 255-255(1)
Author: Bohm C.

Dephosphorization of molten iron
pp. 255-255(1)
Authors: Kaneko T.; Horii K.

Effect of pulverized coal particle size on the combustion rate in ironmaking blast furnaces
pp. 255-255(1)
Author: Gu F.

Electrothermal method for complex evaluation of properties of blast-furnace coke
pp. 255-255(1)
Authors: Sklyar M.G.; Slobodskoi S.A.

Energy consumption and utilization of waste heat in zinc refining in China
pp. 256-256(1)
Author: Zhang L.

Energy inefficiency of Indian steel industry--scope for energy conservation
pp. 256-256(1)
Authors: Choudhury R.; Bhaktavatsalam A.K.

Experience with operation of a facility for preheating of air and gas in air heaters of blast furnace No. 4 in the Trinee Ironworks
pp. 256-256(1)
Authors: Kluza O.; Golasovky L.

Furnace chamber apparatus for smelting of pig iron using coal instead of coke
pp. 256-256(1)
Authors: Den H.; Huibert W.

Furnace for melting steel scrap and method for melting
pp. 256-256(1)
Authors: Okumura K.; Kasama A.

Heat transfer and pressure drop in a heat exchanger with a helical pipe containing inside springs
pp. 256-256(1)
Author: Yildiz C.

Hot redox processing of zinc-containing ores and wastes in electric-arc furnace for zinc recovery by vaporization
pp. 256-256(1)
Author: Barcza N.A.

Influence of strength and reactivity of formed coke on reaction, heat transfer and permeability in lower part of blast furnace
pp. 256-256(1)
Author: Komaki I.

Liquid phase reduction process Romelt
pp. 256-256(1)
Author: Vegman E.F.

Method and furnace for melting steel scrap
pp. 256-256(1)
Author: Okumura K.

Method for manufacture of hot iron having very low phosphorus content
pp. 256-256(1)
Author: Nomura M.

Method for molten-bath smelting
pp. 256-256(1)
Author: Kawakami M.

Molten bath smelting with packed coke
pp. 256-256(1)
Author: Kimura K.

New coke-manufacturing processes for blast furnaces
pp. 256-256(1)
Author: Stuchlik V.

Optimisation of a technical-economic model for use in cogeneration in industrial processes
pp. 256-256(1)
Author: Arcuri P.

Recent developments in COREX technology
pp. 256-256(1)
Author: Eberle A.

Reed-grass contra oil, coal, and atomic energy
pp. 256-256(1)
Author: Kubak W.

Smelting of oxide fines and steelmaking wastes in a rotary furnace for recovery of iron
pp. 257-257(1)
Authors: Rinker F.G.; Horne D.A.

Some aspects of pneumatic injection with particular reference to the design of dischargers and lock feeders
pp. 257-257(1)
Author: Biswas D.K.

Strategy of computer control of coal powder-firing reheating furnace
pp. 257-257(1)
Author: Wang H.

Study and monitoring of temperature and operation of raceway in blast furnace with coal injection
pp. 257-257(1)
Author: Yu K.

The study on operation with small-size coke charge around inside wall of a blast furnace
pp. 257-257(1)
Author: Xu J.

Advanced hot gas filter for the Pinon Pine coal gasification power plant
pp. 257-257(1)
Author: Bruck G.J.

Ceramic cylindrical filters for coal ash removal and their manufacture
pp. 257-257(1)
Authors: Tsunoda H.; Umekawa K.

Ceramic hot-gas candle filter
pp. 257-257(1)
Author: Connally E.S.

Development of a computational scheme for transient combustion inside a refractory tube
pp. 257-257(1)
Author: Kansuntisukmongkol R.

High-density ceramics and their manufacture
pp. 257-257(1)
Author: Yamase O.

International directory of filter media
pp. 257-257(1)

A kind of porous ceramic with controlled poresize distribution
pp. 257-257(1)
Authors: Xu Z.; Guo M.

Manufacture of carbon/boron carbide ceramics
pp. 257-257(1)
Authors: Tatsuno S.; Ushijima J.

Manufacture of high temperature-resistant fiber-reinforced ceramic exhaust manifolds, and the manifolds obtained
pp. 257-258(2)

Melting mechanism of gunning mixture particles along axis of coal-oxygen flame
pp. 258-258(1)
Authors: Wang X.; Li H.

Refractories for the lining of large synthetic ammonia installations
pp. 258-258(1)
Author: Hu B.

A regenerable sorbent injection/filtration process for H₂S removal from hot gas
pp. 258-258(1)
Author: Higgins R.J.

Use of brown-coal fly ash for glass and glass-ceramic production
pp. 258-258(1)
Authors: Nocun M.; Pytel Z.

Zeolite adsorbents of modified porous structure from clay minerals
pp. 258-258(1)
Author: Drag E.B.

Acceptance test for air conditioning systems. Performance acceptance test of cooling surfaces for rooms
pp. 258-258(1)

Adiabatic air cooling--a re-discovered humidification technique?
pp. 258-258(1)
Author: Socher H.J.

Air conditioning applications and design
pp. 258-258(1)
Author: Jones W.P.

Air conditioning installations compared
pp. 258-258(1)
Author: Capozzi R.

Air conditioning technology--shell and tube evaporators
pp. 258-258(1)
Author: Creamer M.

Air conditioning technology. Shell and tube water chillers
pp. 258-258(1)
Author: Creamer M.

Calculating chiller emissions and source energy use
pp. 258-258(1)
Author: Aumann D.J.

Capacity comparisons and operating experience of reciprocating chillers with R407C and R22
pp. 258-258(1)
Author: Hartmann K.

A case study of compact cogeneration using various fuels
pp. 258-258(1)
Author: Silveira J.L.

CCI market review--condensing units
pp. 258-258(1)

Chilled ceiling control
pp. 258-258(1)

Chilled water cassettes
pp. 258-258(1)

Coils, coolers and condensers
pp. 258-258(1)

A comparative study of elliptical and circular sections in one- and two-row tubes and plate fin heat exchangers
pp. 258-259(2)
Author: Rocha L.A.O.

A comparative thermodynamic study of sorption systems--second law analysis
pp. 259-259(1)
Author: Meunier F.

Continuous measurement of oil concentrations in refrigerating plants
pp. 259-259(1)
Author: Ahnefeld G.

Correct freezing protection design
pp. 259-259(1)
Author: Lubitz R.

The demise of the primary-secondary pumping paradigm for chilled water plant design
pp. 259-259(1)
Author: Kirsner W.

Desiccant assisted cooling--Coles supermarket
pp. 259-259(1)
Author: Cheong J.

Desiccant cooling on the test stand
pp. 259-259(1)
Author: Schiller H.

Direct expansion cassettes
pp. 259-259(1)

Effect of reduced evaporator airflow on the high temperature performance of air conditioners
pp. 259-259(1)
Author: Rodriguez A.G.

Effectiveness of a thermal energy storage system using phase-change materials
pp. 259-259(1)
Authors: El-Dessouky H.; Al-Juwayhel F.

An empirical model for sizing capillary tubes
pp. 259-259(1)
Authors: Bansal P.K.; Rupasinghe A.S.

Energy conservation and domestic hot water consumption with decentralised district heating connections for individual dwellings
pp. 259-259(1)
Authors: Breuer W.; Loose P.

Evaluating the potential of vortex-enhanced evaporator performance for refrigeration applications
pp. 259-259(1)
Author: Gentry M.

Evaluation of the dynamic performance of a hot water tank with built-in heating coil
pp. 259-259(1)
Author: Yang L.

Experimental and numerical results in closed annular space heat transfer at low temperature
pp. 259-259(1)
Authors: Chatain D.; Vallcorba R.

Experimental study on a double-orifice two-stage pulse tube refrigerator
pp. 259-259(1)
Author: Chen G.

Find that leak. Part 1
pp. 259-259(1)
Author: Hawkins H.

Flexibility of ammonia systems
pp. 259-259(1)
Author: Clarke R.

Focus on chillers
pp. 260-260(1)
Author: Ashrae J.

A genetic algorithm optimization technique for compact high intensity cooler design
pp. 260-260(1)
Author: Schmit T.S.

German integrated research in refrigeration--past, present and future
pp. 260-260(1)
Authors: Lortz H.; Jahn K.

Guideline methods of calculating TEWI
pp. 260-260(1)

³He/⁴He dilution refrigerator precooled by Gifford-McMahon refrigerator
pp. 260-260(1)
Authors: Uhlig K.; Hehn W.

Heat exchange
pp. 260-260(1)
Author: Smith T.

The Heppenheim block heat and power station--different in many respects
pp. 260-260(1)
Authors: Karel A.; Lorentzen P.

How we conditioned ourselves
pp. 260-260(1)
Author: Casale C.

HVAC system trend analysis
pp. 260-260(1)
Author: Austin S.B.

Implications of indoor climate control for comfort, energy and environment
pp. 260-260(1)
Authors: Mabdavi A.; Kumar S.

Indirect evaporative cooling in retail
pp. 260-260(1)
Author: Bartlett T.A.

Industry status of CFC chiller retrofits and replacements
pp. 260-260(1)
Author: Dooley E.W.

Influence of the new refrigerant thermodynamic properties on some refrigerating turbocompressor characteristics
pp. 260-260(1)
Author: Sarevski M.N.

Investigation of heat transfer in a polymeric phase-change material for low level heat storage
pp. 260-260(1)
Author: Royon L.

Low energy ventilation, heating and cooling systems
pp. 260-260(1)
Author: Saman W.

New Fourier-Reynolds correlations for refrigeration applications
pp. 260-260(1)
Author: Dincer I.

Noise generated by air conditioning equipment
pp. 260-260(1)
Author: Bouteloup J.

A numerical and experimental study of turbulent flow through the evaporator coil in an air conditioning unit
pp. 261-261(1)
Author: Xu Z.G.

Numerical solution of unsteady three-dimensional heat transfer during space cooling using ceiling-embedded piping
pp. 261-261(1)
Authors: Antonopoulos K.A.; Tzivanidis C.

Ozone-friendly refrigeration equipment
pp. 261-261(1)
Author: Sapronov V.I.

Parametric study of phase change thermal energy storage systems for space application
pp. 261-261(1)
Authors: Yimer B.; Adami M.

Performance analysis of vapour compression refrigeration with R22/R124/R152a refrigerant
pp. 261-261(1)
Authors: Kiatsiriroat T.; Na Thalang K.

Performance comparison of R507 and R404a in a cold store refrigeration installation
pp. 261-261(1)
Author: Konig R.

Performance of a heat pipe thermosyphon radiator
pp. 261-261(1)
Authors: Jebrail F.F.; Andrews M.J.

Performance of air coolers with frost formation on the surfaces
pp. 261-261(1)
Authors: Alber J.; Macchi E.

Presence of a liquid water film in air to air flat plate heat exchangers
pp. 261-261(1)
Authors: Dumas A.; Corradini E.

Pressure-enthalpy diagrams for alternative refrigerants
pp. 261-261(1)
Authors: Chen J.; Kruse H.

Propane/n-hexadecane resorption cycle for air-conditioning applications
pp. 261-261(1)
Authors: Rogdakis E.D.; Antonopoulos K.A.

Properties of new refrigerants and predictions for condensation heat transfer enhancement with low-fumed tubes
pp. 261-261(1)
Author: Stegou-Sagia A.

Proposed solutions for retrofitting R11 and R12 turbocompressor installations
pp. 261-261(1)
Author: Brinkmann R.

A quasi-steady-state model of attic heat transfer with radiant barriers
pp. 261-261(1)
Authors: Winiarski D.W.; O'Neal D.L.

Shell-and-tube heat exchangers in refrigeration--part 1
pp. 261-261(1)
Author: Cole R.A.

Simulation of a double-effect LiBr/H₂O absorption cooling system
pp. 262-262(1)
Authors: Wardono B.; Nelson R.

Single and multi indoor unit split systems for residential and light commercial applications
pp. 262-262(1)
Authors: Colombo G.; Casale C.

Solar powered combined ejector vapour compression cycle for air conditioning and refrigeration
pp. 262-262(1)
Author: Sun D.-W.

Statistical analysis of reliability of container refrigeration units
pp. 262-262(1)
Authors: Yami-Qiao J.; Shi-Liang W.

Supermarket refrigeration
pp. 262-262(1)
Author: Austin-Davies J.

Survey of design considerations for ventilating and air conditioning systems in Hong Kong
pp. 262-262(1)
Authors: Chow W.K.; Fung W.Y.

Thermal performance of a tapered store containing tubes of phase change material: cooling cycle
pp. 262-262(1)
Author: Kurklu A.

Thermodynamic properties of technically relevant refrigerant mixtures
pp. 262-262(1)
Author: Kruse H.

Two-axis goniometer for use in the mixing chamber of a dilution refrigerator
pp. 262-262(1)
Author: Suzuki M.

A two-dimensional numerical investigation of the optimal removal time and entropy reduction rate for a sensible thermal storage system
pp. 262-262(1)
Authors: Maveety J.G.; Razani A.

U.S. Naval Academy utilities in ship-shape--serving as energy showcase
pp. 262-262(1)
Author: Chiu C.Y.