Polymer

Polyethylene-layered silicate nanocomposites prepared by the polymerization-filling technique: synthesis and mechanical properties
pp. 2123-2132(10)
Authors: Alexandre M.; Dubois P.; Sun T.; Garces J.M.; Jerome R.

Structure of cyclopentene unit in the copolymer with propylene obtained by stereospecific zirconocene catalysts
pp. 2133-2139(7)
Authors: Naga N.; Imanishi Y.

Poly(p-phenylene) graft copolymers with polytetrahydrofuran/polystyrene side chains
pp. 2141-2149(9)
Authors: Cianga I.; Hepuzer Y.; Yagci Y.

Experimental analysis of the grafting products of diethyl maleate onto linear and branched polyethylenes
pp. 2151-2159(9)
Authors: Rojas de Gascue B.; Mendez B.; Manosalva J.L.; Lopez J.; Ruiz Santa Quiteria V.; Muller A.J.

Synthesis of novel bis- and tris-(cyclic carbonate)s and their use in preparation of polymer networks
pp. 2161-2167(7)
Authors: Al-Azemi T.F.; Bisht K.S.

Synthesis and characterization of a new discotic columnar side-chain liquid crystalline polymer deuterated for NMR analysis
pp. 2169-2178(10)
Authors: Zeng E.; Jacob K.I.; Polk M.B.

Magnetic and conducting Fe₃O₄-cross-linked polyaniline nanoparticles with core-shell structure
pp. 2179-2184(6)
Authors: Deng J.; Ding X.; Zhang W.; Peng Y.; Wang J.; Long X.; Li P.; Chan A.S.C.

Preparation and properties of EPDM-clay hybrids
pp. 2185-2189(5)
Authors: Usuki A.; Tukigase A.; Kato M.

Dynamics of novel hydrogen-bonded acidic fluorinated poly(amide-imide-silica) hybrids studied by solid-state NMR
pp. 2191-2200(10)
Authors: Wang G.P.; Chang T.C.; Hong Y.S.; Chiu Y.S.

Novel vapor sensor from polymer-grafted carbon black: effects of heat-treatment and -ray radiation-treatment on the response of sensor material in cyclohexane vapor
pp. 2201-2206(6)
Authors: Chen J.; Iwata H.; Tsubokawa N.; Maekawa Y.; Yoshida M.

The thermal degradation of poly(vinyl acetate) measured by thermal analysis-Fourier transform infrared spectroscopy
pp. 2207-2211(5)
Authors: Holland B.J.; Hay J.N.

Emulsifying effect of dimethyldioctadecylammonium-hectorite in polystyrene/poly(ethyl methacrylate) blends
pp. 2213-2218(6)
Authors: Voulgaris D.; Petridis D.

Morphology development by reactive compatibilisation and dynamic vulcanisation of nylon6/EPDM blends with a high rubber fraction
pp. 2219-2228(10)
Authors: Oderkerk J.; Groeninckx G.

Comparative dielectric and TSDC studies of molecular mobility in liquid-crystalline side-chain poly(methacrylate)
pp. 2229-2238(10)
Authors: Nikonorova N.A.; Borisova T.I.; Barmatov E.B.; Pissis P.; Diaz-Calleja R.

Influence of the temperature on the formation of a phenolic resol resin catalyzed with amine
pp. 2239-2243(5)
Authors: Astarloa Aierbe G.; Echeverra J.M.; Riccardi C.C.; Mondragon I.

Synthesis and properties of polystyrene/graphite nanocomposites
pp. 2245-2248(4)
Authors: Xiao M.; Sun L.; Liu J.; Li Y.; Gong K.

Studies on the thermal stabilization enhancement of ABS; synergistic effect by triphenyl phosphate and epoxy resin mixtures
pp. 2249-2253(5)
Authors: Lee K.; Kim J.; Bae J.; Yang J.; Hong S.; Kim H.-K.

Formation of amphiphilic complexes of cationic polyelectrolyte carrying pendant saccharide residue with anionic surfactants
pp. 2255-2260(6)
Author: Itaya T.

Space charge behaviors of low-density polyethylene blended with polypropylene copolymer
pp. 2261-2266(6)
Authors: Zhang C.; Mizutani T.; Kaneko K.; Mori T.; Ishioka M.

Effects of phase separation on stress development in polymeric coatings
pp. 2267-2277(11)
Authors: Vaessen D.M.; McCormick A.V.; Francis L.F.

Correlated electrical conductivity and mechanical property analysis of high-density polyethylene filled with graphite and carbon fiber
pp. 2279-2286(8)
Authors: Thongruang W.; Spontak R.J.; Balik C.M.

Effects of NCO/OH molar ratio on structure and properties of graft-interpenetrating polymer networks from polyurethane and nitrolignin
pp. 2287-2294(8)
Authors: Huang J.; Zhang L.

Gas transport behavior of semicrystalline syndiotactic polystyrene containing and crystalline forms
pp. 2295-2309(15)
Authors: Prodpran T.; Shenogin S.; Nazarenko S.

Nafion⁽R)/ORMOSIL nanocomposites via polymer-in situ sol-gel reactions. 1. Probe of ORMOSIL phase nanostructures by ²⁹Si solid-state NMR spectroscopy
pp. 2311-2320(10)
Authors: Young S.K.; Jarrett W.L.; Mauritz K.A.

DSC and DMTA characterization of ternary blends
pp. 2321-2328(8)
Authors: Pinoit D.; Prud'homme R.E.

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry: determining Mark-Houwink-Sakurada parameters and analyzing the breadth of polymer molecular weight distributions
pp. 2329-2335(7)
Authors: Tatro S.R.; Baker G.R.; Fleming R.; Harmon J.P.

Formation of cobalt nanoparticle dispersions in the presence of polysiloxane block copolymers
pp. 2337-2348(12)
Authors: Rutnakornpituk M.; Thompson M.S.; Harris L.A.; Farmer K.E.; Esker A.R.; Riffle J.S.; Connolly J.; St. Pierre T.G.

Probing the association behavior of poly(ethyleneglycol) based amphiphilic comb-like polymer in the presence of cationic surfactant
pp. 2349-2355(7)
Authors: Jayachandran K.N.; Maiti S.

Effects of molecular weight on liquid-crystalline behavior of a mesogen-jacketed liquid crystal polymer synthesized by atom transfer radical polymerization
pp. 2357-2361(5)
Authors: Zhang H.; Yu Z.; Wan X.; Zhou Q.-F.; Woo E.M.

Peroxide modification of polyethylene. Prediction of molecular weight distributions by probability generating functions
pp. 2363-2373(11)
Authors: Asteasuain M.; Sarmoria C.; Brandolin A.

Polymer melt rheology with high-pressure CO₂ using a novel magnetically levitated sphere rheometer
pp. 2375-2383(9)
Authors: Royer J.R.; Gay Y.J.; Adam M.; DeSimone J.M.; Khan S.A.

Hybrid inorganic-organic materials based on a 6FDA-6FpDA-DABA polyimide and silica: physical characterization studies
pp. 2385-2400(16)
Authors: Cornelius C.J.; Marand E.

Barrier properties of polypropylene/polyamide blends produced by microlayer coextrusion
pp. 2401-2408(8)
Authors: Jarus D.; Hiltner A.; Baer E.

Partitioning of polymer chains in solution with a square channel: lattice Monte Carlo simulations
pp. 2409-2415(7)
Authors: Cifra P.; Teraoka I.

Liquid crystalline (cyanoethylpropyl)cellulose and its optically anisotropic composites with acrylic polymers
pp. 2417-2424(8)
Authors: Okrasa L.; Ulanski J.; Boiteux G.

Co-continuous polycarbonate/ABS blends
pp. 2425-2434(10)
Authors: Inberg J.P.F.; Gaymans R.J.

Bidisperse melt polymer brush studied by self-consistent field model
pp. 2435-2444(10)
Author: Terzis A.F.

FT-IR spectroscopic study of hydrogen bonding in PA6/clay nanocomposites
pp. 2445-2449(5)
Authors: Wu Q.; Liu X.; Berglund L.A.

Hot-drawing of poly(methyl methacrylate) and simulation using a glass-rubber constitutive model
pp. 2451-2465(15)
Authors: Dooling P.J.; Buckley C.P.; Rostami S.; Zahlan N.

Detection of the glass relaxation process of the PS-phase in block copolymers
pp. 2467-2478(12)
Authors: Mohammady S.Z.; Mansour A.A.; Knoll K.; Stoll B.

Miscibility and hydrogen bonding in blends of poly(vinyl acetate) with phenolic resin
pp. 2479-2487(9)
Authors: Huang M.-W.; Kuo S.-W.; Wu H.-D.; Chang F.-C.; Fang S.-Y.

Effects of crystallization temperature on the polymorphic behavior of syndiotactic polystyrene
pp. 2489-2494(6)
Authors: Li Y.; He J.; Qiang W.; Hu X.

Microstructure, tensile properties, and biodegradability of aliphatic polyester/clay nanocomposites
pp. 2495-2500(6)
Authors: Lee S.-R.; Park H.-M.; Lim H.; Kang T.; Li X.; Cho W.-J.; Ha C.-S.

Effects of coupling agent and morphology on the impact strength of high density polyethylene/CaCO₃ composites
pp. 2501-2506(6)
Authors: Liu Z.H.; Kwok K.W.; Li R.K.Y.; Choy C.L.

Perpendicular lamellae induced at the interface of neutral self-assembled monolayers in thin diblock copolymer films
pp. 2507-2512(6)
Authors: Sohn B.H.; Yun S.H.

Recovery of molecular weight distributions from transformed domains. Part I. Application of pgf to mass balances describing reactions involving free radicals
pp. 2513-2527(15)
Authors: Asteasuain M.; Sarmoria C.; Brandolin A.

Recovery of molecular weight distributions from transformed domains. Part II. Application of numerical inversion methods
pp. 2529-2541(13)
Authors: Asteasuain M.; Brandolin A.; Sarmoria C.

Analytical expressions for transient melting of polymer pellet sliding against adiabatic wall
pp. 2543-2548(6)
Authors: Yung K.L.; Xu Y.; Lau K.H.

Development of molecular orientation and stress in biaxially deformed polymers. I. Affine deformation in a solid state
pp. 2549-2559(11)
Authors: Jarecki L.; Ziabicki A.

Computational study of thermally controlled polymer network disassembly via the incorporation of sterically hindered urea linkages
pp. 2561-2567(7)
Authors: Malik J.; Clarson S.J.

Effect of non-Gaussian chains on fluctuations of junctions in bimodal networks
pp. 2569-2574(6)
Authors: Kloczkowski A.; Erman B.; Mark J.E.

Photoinitiated cationic polymerization using a novel phenacyl anilinium salt
pp. 2575-2579(5)
Authors: Kasapoglu F.; Onen A.; Bicak N.; Yagci Y.

Infra-red spectrum of the tight (110) fold in n-C₁₉₈H₃₉₈
pp. 2581-2584(4)
Authors: Gorce J.-P.; Spells S.J.

Effect of ultrasonic wave on the degradation of polypropylene melt and morphology of its blend with polystyrene
pp. 2585-2589(5)
Authors: Kim H.; Lee J.W.

Structural characterization of maleic anhydride grafted polyethylene by ¹³C NMR spectroscopy
pp. 2591-2594(4)
Authors: Yang L.; Zhang F.; Endo T.; Hirotsu T.