Polymer

Effect of reinforcing fibres on the morphology of a toughened epoxy/amine system
pp. 1005-1009(5)
Authors: Varley R.J.; Hodgkin J.H.

Study of the polymer morphology in a poly(ester-urethane) elastomer by solid state ¹H n.m.r. spectroscopy
pp. 1011-1016(6)
Authors: Clayden N.J.; Nijs C.L.; Eeckhaut G.J.

A d.s.c. kinetic study on the effect of filler concentration on crosslinking of diglycidylether of bisphenol-A with 4,4'-diaminodiphenylmethane
pp. 1017-1020(4)
Authors: de Miranda M.I.G.; Tomedi C.; Bica C.I.D.; Samios D.

Full-pattern analysis of two-dimensional small-angle scattering data from oriented polymers using elliptical coordinates
pp. 1021-1028(8)
Authors: Murthy N.S.; Zero K.; Grubb D.T.

Birefringence of amorphous polyarylates: 2. Dynamic measurement on a polyarylate with low optical anisotropy
pp. 1029-1034(6)
Authors: Inoue T.; Hwang E.-J.; Osaki K.

Molecular dynamics simulations of the transport of water-ethanol mixtures through polydimethylsiloxane membranes
pp. 1035-1045(11)
Authors: Fritz L.; Hofmann D.

Micromechanical and microdielectric transitions in P(S-g-EO) modified PPO/PMMA blends
pp. 1047-1055(9)
Authors: Eklind H.; Maurer F.H.J.; Steeman P.A.M.

Property-composition dependence of poly(ethylene terephthalate)/poly(ether ester) blends
pp. 1057-1064(8)
Authors: Skafidas D.S.; Kalfoglou N.K.

Effects of functionalized protonic acids on the miscibility of polyaniline/poly(2-ethyl-2-oxazoline) blends
pp. 1065-1072(8)
Authors: Ong C.H.; Goh S.H.; Chan H.S.O.

Miscibility and phase behaviour of methyl methacrylate copolymer and polycarbonate blends
pp. 1073-1079(7)
Authors: Ohnaga T.; Sato T.; Nagata S.

Some comments on the significance of the compensation effect observed in thermally stimulated current experiments
pp. 1081-1089(9)
Authors: Ramos J.J.M.; Mano J.F.; Sauer B.B.

High performance PET fibre properties achieved at high speed using a combination of threadline modification and traditional post treatment
pp. 1091-1100(10)
Authors: Gang W.; Tucker P.A.; Cuculo J.A.

High performance poly(ethylene terephthalate) fibre properties achieved via high speed spinning with a modified liquid isothermal bath process
pp. 1101-1110(10)
Authors: Huang B.; Tucker P.A.; Cuculo J.A.

Anomalous flammability behaviour of CPVC (chlorinated poly vinylchloride) in blends with ABS (acrylonitrile-butadiene-styrene) containing flame-retarding/smoke-suppressing compounds
pp. 1111-1119(9)
Authors: Carty P.; White S.

Curing study of dicyclopentadiene resin and effect of elastomer on its polymer network
pp. 1121-1130(10)
Authors: Yang Y.-S.; Lafontaine E.; Mortaigne B.

Transesterification and ringed spherulites in blends of butylene terephthalate--caprolactone copolyester with poly(-caprolactone)
pp. 1131-1138(8)
Authors: Ma D.; Xu X.; Luo X.; Nishi T.

Study on poly(butyl acrylate)/poly(-methyl styrene-co-acrylate) core-shell particles as a processing aid for poly(vinyl chloride)
pp. 1139-1143(5)
Authors: Juangang G.; Liting Y.; Kuilin D.; Zihua Y.

Conducting polymer based pH detector: a new outlook to pH sensing technology
pp. 1145-1150(6)
Author: Talaie A.

The cure and diffusion of water in halogen containing epoxy/amine thermosets
pp. 1151-1168(18)
Authors: Hayward D.; Hollins E.; Johncock P.; McEwan I.; Pethrick R.A.; Pollock E.A.

Surface phase separation in an amphiphilic block copolymer monolayer at the air-water interface
pp. 1169-1177(9)
Authors: Richards R.W.; Rochford B.R.; Webster J.R.P.

Characterization and morphology of Novolak or poly(vinyl phenol)/poly(ethylene oxide) blends
pp. 1179-1185(7)
Authors: Sotele J.J.; Soldi V.; Nunes Pires A.T.

Gel formation by chain-crosslinking photopolymerization of methyl methacrylate and ethylene glycol dimethacrylate
pp. 1187-1196(10)
Authors: Naghash H.J.; Okay O.; Yagci Y.

A potassium alcoholate-initiated polymerization of 2-(trialkylsiloxyethyl) methacrylate
pp. 1197-1202(6)
Authors: Iijima M.; Nagasaki Y.; Kato M.; Kataoka K.

Influence of the sequence distribution on the crystalline structure of ethylene-dimethyl-aminoethylmethacrylate copolymers
pp. 1203-1205(3)
Authors: Qun C.; Huijun L.; Guang Y.; Duanfu X.

Structure and melting of blends of linear and branched polyethylenes crystallized at high undercooling
pp. 1207-1214(8)
Authors: Alizadeh A.; Munoz-Escalona A.; Vallejo B.; Martinez-Salazar J.

Strain-induced birefringence and molecular structure of glassy polymers
pp. 1215-1220(6)
Authors: Inoue T.; Matsui H.; Murakami S.; Kohjiya S.; Osaki K.

Substituted poly(p-phenylene)s prepared from 2,5-diheptylbenzene-1,4-bis(trimethylene boronate)
pp. 1221-1226(6)
Authors: Tanigaki N.; Masuda H.; Kaeriyama K.

Preparation of pH/temperature responsive polymer membrane by plasma polymerization and its riboflavin permeation
pp. 1227-1232(6)
Authors: Lee Y.M.; Shim J.K.

Crowned polyacetylene: 3. Synthesis and cation-binding property of polyphenylacetylene with azacrown cavity by cyclopolymerization of ,-bis(4'-ethynylphenoxy) oligooxyethylene containing a pyridyl unit
pp. 1233-1238(6)
Authors: Kakuchi T.; Watanabe T.; Matsunami S.; Kamimura H.; Haba O.; Yokota K.

Effect of temperature and HV monomer concentration on parameters of the unit cell of the PHB/HV biopolymer crystal
pp. 1239-1242(4)
Authors: Skrbic Z.; Divjakovic V.; Petrovic Z.S.

Miscibility of nylon 46 and ethylene-vinyl alcohol copolymer blends
pp. 1243-1246(4)
Authors: Ha C.-S.; Ko M.-G.; Cho W.-J.

Deposition of polythiophene films onto p-type silicon
pp. 1247-1249(3)
Authors: Shi G.; Li C.; Yu B.; Ye W.

Preparation of gradient refractive index rod by swollen-gel polymerization
pp. 1251-1254(4)
Authors: Liu J.-H.; Liu H.-T.