Polymer

High energy ion irradiation effects on polymer materials: 2. Proton irradiation effects on PMMA and GFRP
pp. 4663-4665(3)
Authors: Kudoh H.; Sasuga T.; Seguchi T.; Katsumura Y.

Miscibility, morphology and fracture toughness of epoxy resin/poly(styrene-co-acrylonitrile) blends
pp. 4667-4673(7)
Authors: Zheng S.; Wang J.; Guo Q.; Wei J.; Li J.

Orientation determination and morphological study of high density polyethylene (HDPE) extruded tubular films: effect of processing variables and molecular weight distribution
pp. 4675-4687(13)
Authors: Yu T.-H.; Wilkes G.L.

The influence of coalescence on the morphology of the minor phase in melt-drawn polyamide-6/HDPE blends
pp. 4689-4693(5)
Authors: Gonzalez-Nunez R.; De Kee D.; Favis B.D.

Imaging of epitaxially grown poly(p-oxybenzoate) films with the atomic force microscope
pp. 4695-4704(10)
Authors: Wang J.; Kaito A.; Ohnishi S.; Yase K.; Tanigaki N.

Crosslinking copolymerization of epoxy methacrylates as studied by Fourier transform Raman spectroscopy
pp. 4705-4712(8)
Authors: Sandner B.; Kammer S.; Wartewig S.

Viscosity of salt-in-polymer solutions near the glass transition temperature by penetrometry, and pseudo-macromolecule behaviour at a critical composition in NaClO₄-PPO(4000)
pp. 4713-4721(9)
Authors: McLin M.G.; Angell C.A.

The role of interfacial contact in immiscible binary polymer blends and its influence on mechanical properties
pp. 4723-4728(6)
Authors: Leclair A.; Favis B.D.

High temperature resins based on allylamine/bismaleimides
pp. 4729-4737(9)
Authors: Lin K.-F.; Lin J.-S.; Cheng C.-H.

Deformation modes of poly(styrene-co-sodium methacrylate) ionomers
pp. 4739-4745(7)
Authors: Ma X.; Sauer J.A.; Hara M.

The kinetics of polymer brush penetration in to a high molecular weight matrix
pp. 4747-4752(6)
Author: Clarke C.J.

Self-association versus interassociation in hydrogen bonded polymer blends: 1. Determination of equilibrium constants from miscible poly(2,6-dialkyl-4-vinyl phenol) blends
pp. 4753-4761(9)
Authors: Coleman M.M.; Pehlert G.J.; Yang X.; Stallman J.B.; Painter P.C.

Self-association versus interassociation in hydrogen bonded polymer blends: 2. Comparison of theoretical and experimental miscibility windows for poly(2,6-dialkyl-4-vinyl phenol) blends
pp. 4763-4771(9)
Authors: Pehlert G.J.; Yang X.; Painter P.C.; Coleman M.M.

Molecular modelling simulation of gas transport in amorphous polyimide and poly(amide imide) membrane materials
pp. 4773-4785(13)
Authors: Hofman D.; Ulbrich J.; Fritsch D.; Paul D.

Studies on blends of ionomers
pp. 4787-4793(7)
Authors: Kurian T.; Datta S.; Khastgir D.; De P.P.; Tripathy D.K.; De S.K.; Peiffer D.G.

Polymer-dispersed liquid crystals based on epoxy networks: 1. Effects of the liquid crystal addition on the epoxy-amine reaction
pp. 4795-4802(8)
Authors: Siddiqi H.M.; Dumon M.; Eloundou J.P.; Pascault J.P.

Preparation and characterization of Langmuir-Blodgett films of polyemeraldine base
pp. 4803-4813(11)
Authors: Ram M.K.; Malhotra B.D.

2-Furyloxirane: 1. Anionic and coordination homo- and copolymerization
pp. 4815-4821(7)
Authors: Amri H.; Belgacem M.N.; Gandini A.

Microporous polymeric materials by microemulsion polymerization: effect of the ratio of long and short alkyl chain length cationic surfactants
pp. 4823-4831(9)
Authors: Chieng T.H.; Gan L.M.; Chew C.H.; Ng S.C.; Pey K.L.

Structural study of syndiotactic polypropylene gel by solid-state high resolution ¹³C n.m.r.
pp. 4833-4839(7)
Authors: Nakaoki T.; Hayashi H.; Kitamaru R.

Synthesis, characterization and mechanical properties of networks prepared from poly(propylene glycol) di(ethylmaleate) and a trifunctional thiol
pp. 4841-4847(7)
Authors: Winter H.; Nusselder J.J.H.; Steeman P.A.M.

Mechanical effects according to the type of poly(styrene-co-methyl methacrylate) copolymers at polystyrene/poly(methyl methacrylate) interfaces
pp. 4849-4852(4)
Authors: Cho K.; Ahn T.O.; Ryu H.S.; Seo K.H.

Thermal isomerization of cis-poly(phenylacetylene). Scission of polymer main-chain and formation of 1,3,5-triphenylbenzene as a pyrolysis product
pp. 4853-4855(3)
Authors: Matsunami S.; Watanabe T.; Kamimura H.; Kakuchi T.; Ishii F.; Tsuda K.

Effects of annealing on the disappearance and creation of constrained amorphous phase
pp. 4857-4863(7)
Authors: Lu S.X.; Cebe P.

Plasticization of an ionic thermoplastic elastomer based on EPDM by diethylene glycol
pp. 4865-4868(4)
Authors: Kurian T.; Khastigir D.; De P.P.; Tripathy D.K.; De S.K.; Peiffer D.G.

Triazine formation in cyanate-based resin systems at room temperature conditions
pp. 4869-4872(4)
Authors: Owusu A.O.; Martin G.C.; Gotro J.T.

Hexafluoroisopropoxy-containing polyesters
pp. 4873-4875(3)
Authors: Reddy V.S.; Cassidy P.E.; Fitch J.W.; Lunceford B.D.; Person D.

Structure of iodine-nylon 6 complex: 4. Irregular stacking of intercalated iodine in the complex
pp. 4877-4880(4)
Author: Kawaguchi A.