Materials Research Bulletin

Preparation, characterization and property of fine PZT powders from the poly vinyl alcohol evaporation route
pp. 1539-1549(11)
Authors: Das R.N.; Pathak A.; Saha S.K.; Sannigrahi S.; Pramanik P.

Structure and roughness of metal-fluoroplast composite coatings
pp. 1551-1560(10)
Authors: Shkurankov A.V.; Saxin E.V.; Shevyryov A.A.

Twin structures in lanthanum, praseodymium, and neodymium aluminate ceramics
pp. 1561-1571(11)
Authors: Kim C.-H.; Cho S.-Y.; Kim I.-T.; Cho W.-J.; Hong K.-S.

Erosion of in-situ TiC particle reinforced Al-5Cu composite
pp. 1573-1585(13)
Authors: Gui M.; Wang D.; Wu J.; Li C.

Preparation and characterization of SrFeCo_0.5O_3.25+ by gelcasting
pp. 1587-1594(8)
Authors: Changrong X.; Xiaohong F.; Guoguang Z.; Chusheng C.; Dingkun P.; Guangyao M.

Synchrotron X-ray microtomography, X-ray absorption near edge structure, extended X-ray absorption fine structure, and voxel imaging of a cobalt-zeolite-Y complex
pp. 1595-1602(8)
Authors: Owens J.W.; Butler L.G.; Dupard-Julien C.; Garner K.

Emission color tuning from blue to green through cross-relaxation in heavily Tb³⁺-doped YAlO₃
pp. 1603-1608(6)
Authors: Kim G.C.; Park H.L.; Kim T.W.

-Irradiation preparation of cadmium selenide nano-particles in ethylenediamine system
pp. 1609-1613(5)
Authors: Ge X.; Ni Y.; Liu H.; Ye Q.; Zhang Z.

Low-temperature metastabilization of tetragonal V⁺⁴-containing ZrO₂ solid solutions
pp. 1615-1627(13)
Authors: Valentn C.; Folgado J.V.; Alarcon J.

Optical properties of bismuth trioxide thin films
pp. 1629-1637(9)
Authors: Leontie L.; Caraman M.; Delibas M.; Rusu G.I.

Growth of Bi₂Sr₂CaCu₂O_x superconducting whiskers from a Bi-rich melt
pp. 1639-1644(6)
Authors: Matsubara I.; Funahashi R.

Improved high Q value of CaTiO₃-Ca(Mg_1/3Nb_2/3)O₃ solid solution with near zero temperature coefficient of resonant frequency
pp. 1645-1652(8)
Authors: Huang C.-L.; Chen H.-L.; Wu C.-C.

A comparison of the properties of Bi-2223 precursor powders synthesized by various methods
pp. 1653-1658(6)
Authors: Hsueh Y.-W.; Chang S.C.; Liu R.S.; Woodall L.; Gerards M.

Growth of 5H-type silicon carbide whisker
pp. 1659-1663(5)
Authors: Peng Y.; Meng Z.; Zhong C.; Lu J.; Yu W.; Qian Y.

Cold-crystallization of Poly(ether-ether-ketone) amorphized by ball milling
pp. 1665-1673(9)
Authors: Font J.; Muntasell J.; Cesari E.

Preparation and characterization of translucent PLZT8/65/35 ceramics from nano-sized powders produced by a high-energy ball-milling process
pp. 1675-1685(11)
Authors: Kong L.B.; Ma J.; Zhu W.; Tan O.K.

Electrochemical preparation of silver dendrites in the presence of DNA
pp. 1687-1692(6)
Authors: Zhu J.; Liao X.; Chen H.-Y.

Dielectric properties and phase transition mechanisms in Sr_1-xBa_xTiO₃ solid solution at low doping concentration
pp. 1693-1701(9)
Authors: Wang R.; Inaguma Y.; Itoh M.

Characterization of solid-solid interactions and physico-chemical properties of copper-cobalt mixed oxides and Cu_xCo_3-xO₄ spinels
pp. 1703-1716(14)
Authors: Shaheen W.M.; Ali A.A.

The Synthesis of MCM-48 with high yields
pp. 1717-1720(4)
Authors: Wang S.; Wu D.; Sun Y.; Zhong B.

Crystal structure studies of the 3R-Nb_1.09S₂ and the 2H-NbSe₂ compounds: correlation between nonstoichiometry and stacking type (= polytypism)
pp. 1721-1727(7)
Authors: Meerschaut A.; Deudon C.

Microstructure and elemental distribution of multicrystal Ag/Cu interface in bimetallic strips with diffusion treatment
pp. 1729-1735(7)
Authors: Meng L.; Zhou S.P.; Yang F.T.; Lin D.Z.

Factors affecting the lamellar spacing in two-phase TiAl alloys with fully lamellar microstructures
pp. 1737-1742(6)
Authors: Tang J.; Huang B.; Zhou K.; Liu W.; He Y.; Liu Y.

Ionic conductivity in solid solutions of PbF₂ and YF₃
pp. 1743-1749(7)
Authors: Patwe S.J.; Balaya P.; Goyal P.S.; Tyagi A.K.

Macroporous carbons prepared by templating silica spheres
pp. 1751-1757(7)
Authors: Gundiah G.; Govindaraj A.; Rao C.N.R.