Chemical Engineering Science

Separation of binary mixtures by dense membrane processes: influence of inert gas entrance under variable downstream pressure conditions
pp. 2767-2775(9)
Authors: Vallieres C.; Favre E.; Arnold X.; Roizard D.

TEOM analysis of the equilibria and kinetics of n-hexane and n-heptane adsorption on FCC catalyst/silicalite
pp. 2777-2784(8)
Authors: Alpay E.; Chadwick D.; Kershenbaum L.S.; Barrie P.J.; Sivadinarayana C.; Gladden L.F.

A critical comparison between the wave model and the standard dispersion model
pp. 2785-2795(11)
Authors: Iordanidis A.A.; van Sint Annaland M.; Kronberg A.E.; Kuipers J.A.M.

Permeation behavior during the catalytic oxidation of CO in a Pt-loaded Y-type zeolite membrane
pp. 2797-2803(7)
Authors: Hasegawa Y.; Sotowa K.-I.; Kusakabe K.

The bifurcation behavior of continuous free-radical solution loop polymerization reactors
pp. 2805-2821(17)
Authors: Melo P.A.; Biscaia E.C.; Pinto J.C.

Asymptotic analysis of a complex reaction scheme in solid-liquid system
pp. 2823-2834(12)
Authors: Haario H.; Kalachev L.

Method for inferring contact angle and for correlating static liquid hold-up in packed beds
pp. 2835-2855(21)
Authors: Ortiz-Arroyo A.; Larachi F.V.; Iliuta I.

Powder flowability and density ratios: the impact of granules packing
pp. 2857-2874(18)
Authors: Santomaso A.; Lazzaro P.; Canu P.

A parametric study of direct gravure coating
pp. 2875-2882(8)
Author: Kapur N.

Derivation of supersaturation and nucleation flux during precipitation from the mixing pattern of an inert tracer in the same device: case of unmixed feed streams
pp. 2883-2891(9)
Authors: David R.; Fall A.; Lecoq O.

Particle size distributions and viscosity of suspensions undergoing shear-induced coagulation and fragmentation
pp. 2893-2902(10)
Authors: Barthelmes G.; Pratsinis S.E.; Buggisch H.

Continuous distribution theory for Ostwald ripening: comparison with the LSW approach
pp. 2903-2909(7)
Authors: Madras G.; McCoy B.J.

Enzymatic degradation of poly (&unknown;-caprolactone), poly (vinyl acetate) and their blends by lipases
pp. 2911-2919(9)
Authors: Sivalingam G.; Chattopadhyay S.; Madras G.

Simulation and thermodynamic analysis of conventional and oxygen permeable CPO reactors
pp. 2921-2930(10)
Authors: Ji P.; van der Kooi H.J.; de Swaan Arons J.

Molecular thermodynamics approach for liquid-liquid equilibria of the symmetric polymer blend systems
pp. 2931-2936(6)
Authors: Chang B.H.; Bae Y.C.

On the origin, frequency and magnitude of macro-instabilities of the flows in stirred vessels
pp. 2937-2949(13)
Authors: Nikiforaki L.; Montante G.; Lee K.C.; Yianneskis M.

The role of convection and turbulent dispersion in blending
pp. 2951-2962(12)
Authors: Patwardhan A.W.; Pandit A.B.; Joshi J.B.

Modeling the protein partitioning in aqueous polymer two-phase systems: influence of polymer concentration and molecular weight
pp. 2963-2972(10)
Authors: Lin D.-Q.; Wu Y.-T.; Mei L.-H.; Zhu Z.-Q.; Yao S.-J.

State multiplicity in PFR-separator-recycle polymerization systems
pp. 2973-2984(12)
Authors: Kiss A.A.; Bildea C.S.; Dimian A.C.; Iedema P.D.

A new approach to modelling of single droplet drying
pp. 2985-2993(9)
Author: Farid M.

Bubble flow in trickle beds: investigations using resistive sensors
pp. 2995-3004(10)
Authors: Rode S.; Benkrid K.; Gillier T.; Midoux N.

Nearly irreversible, fast heterogeneous reactions in premixed flow
pp. 3005-3023(19)
Authors: Mchedlov-Petrossyan P.O.; Khomenko G.A.; Zimmerman W.B.

Bounded robust control of constrained multivariable nonlinear processes
pp. 3025-3047(23)
Authors: El-Farra N.H.; Christofides P.D.

Analytical solution for a population balance equation with aggregation and fragmentation
pp. 3049-3051(3)
Authors: J. McCoy B.; Madras G.

Comparison among attrition-reaction models of SO₂ capture by uncalcined limestone under pressurized fluidized bed combustion conditions
pp. 3053-3057(5)
Authors: Shimizu T.; Peglow M.; Yamagiwa K.; Tanaka M.