Chemical Engineering Science

Gas-inducing impeller design and performance characteristics
pp. 603-615(13)
Authors: Forrester S.E.; Rielly C.D.; Carpenter K.J.

Liquid mixing and phase hold-ups in gas producing fluidized bed bioreactors
pp. 617-627(11)
Authors: Buffiere P.; Fonade C.; Moletta R.

Integral sorption in glassy polymers
pp. 629-638(10)
Authors: Vrentas J.S.; Vrentas C.M.

Modelling and simulation of hydrocarbon mobility in soil-water and soil-supercritical carbon dioxide systems
pp. 639-649(11)
Authors: Barna L.; Bayard R.; Blanchard J.M.; Gourdon R.

Detecting powder mixture segregation for multicomponent mixtures
pp. 651-655(5)
Authors: Walker J.J.; Rollins D.K.

Selective catalytic reduction of NO over commercial DeNO_x-catalysts: experimental determination of kinetic and thermodynamic parameters
pp. 657-669(13)
Authors: Koebel M.; Elsener M.

Multiplicity of the solutions of the flash equations
pp. 671-677(7)
Authors: Tiscareno F.; Gomez A.; Jimenez A.; Chavez R.

Reaction-bonded silicon nitride synthesis: experiments and model
pp. 679-689(11)
Authors: Maalmi M.; Varma A.; Strieder W.C.

Conversion-temperature trajectories for well-mixed adsorptive reactors
pp. 691-696(6)
Authors: Yongsunthon I.; Alpay E.

A non-isothermal, non-equimolar transient kinetic model for gas-solid reactions
pp. 697-708(12)
Authors: Patisson F.; Francois M.G.; Ablitzer D.

Studies of mixing in a concentric tube airlift bioreactor with different spargers
pp. 709-719(11)
Authors: Merchuk J.C.; Contreras A.; Garcia F.; Molina E.

Asymptotic approach for mass transfer in a steady laminar Newtonian flow for estimating the aqueous layer permeability
pp. 721-726(6)
Author: Flores A.F.

Numerical simulation of a reverse-flow NO_x-SCR reactor with side-stream ammonia addition
pp. 727-734(8)
Authors: Snyder J.D.; Subramaniam B.

Three-phase foam equation of state
pp. 735-741(7)
Authors: Gaporaud B.M.M.; Sajet P.; Antonini G.

Application of cubic equations of state to the fit of vapor pressures of pure components
pp. 743-751(9)
Authors: Wisniak J.; Apelblat A.; Segura H.

Appropriately defined dimensionless groups for the description of flow phenomena in disperse systems
pp. 753-759(7)
Author: Molerus O.

The mechanical behaviour of vibrated, aerated beds of glass and starch powder
pp. 761-772(12)
Authors: Janssen L.P.B.M.; Marring E.; Hoogerbrugge J.C.; Hoffmann A.C.

Non-linear tracking of glass transition temperatures for free radical emulsion copolymers
pp. 773-786(14)
Authors: Fevotte G.; McKenna T.F.; Othman S.; Hammouri H.

A trickle-bed reactor model for hydrogenation of 2,4 dinitrotoluene: experimental verification
pp. 787-805(19)
Authors: Rajashekharam M.V.; Jaganathan R.; Chaudhari R.V.

Prediction of heat transfer in prototype fluidized reactors from scale-model data
pp. 807-817(11)
Authors: Overmann S.P.; Brown R.C.; Grewal N.S.

Frequency response of an adsorber with modulation of the inlet molar flow-rate--I. A semi-batch adsorber
pp. 819-832(14)
Authors: Park I.S.; Petkovska M.; Do D.D.

Frequency response of an adsorber with modulation of the inlet molar flow-rate--II. A continuous flow adsorber
pp. 833-843(11)
Authors: Park I.S.; Petkovska M.; Do D.D.

Conduction heat transfer from confined spheres
pp. 845-846(2)
Author: Kubie J.

The linear driving force model for cyclic adsorption and desorption: the effect of external fluid-film mass transfer
pp. 847-851(5)
Authors: Choong T.S.Y.; Scott D.M.

The Wong-Sandler mixing rules and EOS which are thermodynamically consistent at infinite pressure
pp. 853-856(4)
Authors: Brandani F.; Brandani S.; Brandani V.