Cement and Concrete Research

Editorial Board
pp. CO2-CO2(1)

Accelerated microstructural evolution of a calcium-silicate-hydrate (C-S-H) phase in pozzolanic pastes using fine siliceous sources: Comparison with historic pozzolanic mortars
pp. 1-6(6)
Authors: Moropoulou A.; Cakmak A.; Labropoulos K.C.; Van Grieken R.; Torfs K.

Alkali-aggregate reaction in concrete containing high-alkali cement and granite aggregate
pp. 7-11(5)
Author: Owsiak Z.

The influence of initial water curing on the strength development of ordinary portland and pozzolanic cement concretes
pp. 13-18(6)
Authors: Ozer B.; Ozkul M.H.

Absorption characteristics of metakaolin concrete
pp. 19-29(11)
Authors: Khatib J.M.; Clay R.M.

Influence of moisture states of natural and recycled aggregates on the slump and compressive strength of concrete
pp. 31-36(6)
Authors: Poon C.S.; Shui Z.H.; Lam L.; Fok H.; Kou S.C.

Properties of concrete incorporating high volumes of class F fly ash and san fibers
pp. 37-42(6)
Author: Siddique R.

A novel method for describing chloride ion transport due to an electrical gradient in concrete: Part 1. Theoretical description
pp. 43-49(7)
Authors: Stanish K.; Hooton R.D.; Thomas M.D.A.

A novel method for describing chloride ion transport due to an electrical gradient in concrete: Part 2. Experimental study
pp. 51-57(7)
Authors: Stanish K.; Hooton R.D.; Thomas M.D.A.

Wood fiber surface treatment level effects on selected mechanical properties of wood fiber-cement composites
pp. 59-65(7)
Authors: Pehanich J.L.; Blankenhorn P.R.; Silsbee M.R.

The effect of two types of C-S-H on the elasticity of cement-based materials: Results from nanoindentation and micromechanical modeling
pp. 67-80(14)
Authors: Constantinides G.; Ulm F.-J.

Value-added utilisation of waste glass in concrete
pp. 81-89(9)
Authors: Shayan A.; Xu A.

Porosity study on free mineral addition cement paste
pp. 91-97(7)
Authors: Salgueiro W.; Somoza A.; Cabrera O.; Consolati G.

Strength and shrinkage properties of mortar containing a nonstandard high-calcium fly ash
pp. 99-102(4)
Authors: Atis C.D.; Kilic A.; Sevim U.K.

Role of fibers in controlling unrestrained expansion and arresting cracking in Portland cement concrete undergoing alkali-silica reaction
pp. 103-108(6)
Authors: Haddad R.H.; Smadi M.M.

Fire performance of recycled rubber-filled high-strength concrete
pp. 109-117(9)
Authors: Hernandez-Olivares F.; Barluenga G.

The effects of carbonation and drying during intermittent leaching on the release of inorganic constituents from a cement-based matrix
pp. 119-131(13)
Authors: Gervais C.; Garrabrants A.C.; Sanchez F.; Barna R.; Moszkowicz P.; Kosson D.S.

Analysis of geometric characteristics of GGBS particles and their influences on cement properties
pp. 133-137(5)
Authors: Wan H.; Shui Z.; Lin Z.

Pore solution in alkali-activated slag cement pastes. Relation to the composition and structure of calcium silicate hydrate
pp. 139-148(10)
Authors: Puertas F.; Fernandez-Jimenez A.; Blanco-Varela M.T.

Influence of carbonation and carbonation methods on leaching of metals from mortars
pp. 149-156(8)
Authors: Van Gerven T.; Van Baelen D.; Dutre V.; Vandecasteele C.

Magnesia-ammonium phosphate-bonded cordierite refractory castables: Phase evolution on heating and mechanical properties
pp. 157-164(8)
Authors: Hipedinger N.E.; Scian A.N.; Aglietti E.F.

Analyzing crack width to predict corrosion in reinforced concrete
pp. 165-174(10)
Authors: Vidal T.; Castel A.; Francois R.