Skip to main content

La2Mo2O9-Based Electrolyte: Ion Conductivity and Anode-Supported Cell under Single Chamber Conditions

Buy Article:

$51.00 plus tax (Refund Policy)

We demonstrate the applicability of LAMOX as an electrolyte for solid oxide fuel cells (SOFC) by preparing two anode-supported cells based on La0.9Dy0.1Mo2O9 and La0.9Dy0.1Mo1W1O9, and operating at 625°–700°C under single chamber conditions. The two cells, supported by a composite of NiO and Gd-doped ceria (GDC), are initialized with a porous Ni+GDC disk to catalyze the partial oxidation reaction of methane. The partially oxidized methane reduces NiO to Ni catalyst and activates the cell at 650°C. A typical membrane electrode assembly of the single chamber SOFC cell consists of a 60-m-thick La0.9Dy0.1Mo2O9 electrolyte, an anode of Ni+GDC, and a cathode of lanthanum strontium cobalt ferrite. Its peak power measures 220 mW/cm2 at 700°C in a tubular chamber of 15 mm in diameter, with the total methane/air flow rate of 350 mL/min and CH4:O2=2:1.
No References
No Citations
No Supplementary Data
No Data/Media
No Metrics

Document Type: Research Article

Affiliations: 1: Department of Chemical Engineering, National Taiwan University of Science and Technology, Taipei 10607, Taiwan 2: Department of Chemical Engineering, National United University, Miaoli 36003, Taiwan

Publication date: 2011-03-01

  • Access Key
  • Free content
  • Partial Free content
  • New content
  • Open access content
  • Partial Open access content
  • Subscribed content
  • Partial Subscribed content
  • Free trial content
Cookie Policy
X
Cookie Policy
Ingenta Connect website makes use of cookies so as to keep track of data that you have filled in. I am Happy with this Find out more