Low-Loss Microwave Dielectric Material Based on Magnesium Titanate
Abstract:Low-loss ilmenite magnesium titanate was synthesized from TiO2 and MgO powders prepared separately from chemical solutions. Both of these starting materials were very fine and had a high specific area. MgTiO3 ceramic had a high quality factor (Q×f) of ∼186 000 GHz when reactive sintering (calcination free) was adopted at 1400°C for 4 h. Moreover, a very high Q×f value of 368 000 GHz (at 10 GHz) was observed when classical solid-state sintering, in which the sintering temperature was as low as 1300°C for 4 h, was applied. The possible mechanism that caused the variation in Q×f values for samples prepared by different sintering processes and initial powders were presented. The proposed low-loss MgTiO3 is very promising for microwave or millimeter-wave applications.
Document Type: Research Article
Affiliations: 1: Department of Electrical Engineering, National Cheng Kung University, Tainan 70101, Taiwan 2: Department of Material Science and Engineering, National Cheng Kung University, Tainan 70101, Taiwan
Publication date: September 1, 2010