Advanced Engineering Materials

Front Cover Advanced Engineering Materials 3/2013
pp. 73-73(1)
Authors: Zhang, Qiang; Toda, Hiroyuki; Kobayashi, Masakazu; Uesugi, Kentaro; Suzuki, Yoshio

Adv. Eng. Mater. 3/2013
pp. 74-74(1)

Adv. Eng. Mater. 3/2013
pp. 75-79(5)

Editorial
pp. 81-81(1)
Authors: Hur, Bo-Young; Kim, Seung-Eun; Banhart, John; García Moreno, Francisco

Light-Metal Foams-History of Innovation and Technological Challenges
pp. 82-111(30)
Author: Banhart, John

Viability Study of the Use of Cast Iron Open Cell Foam as Microbial Fuel Cell Electrodes
pp. 112-117(6)
Authors: Mapelli, Carlo; Mapelli, Valeria; Olsson, Lisbeth; Mombelli, Davide; Gruttadauria, Andrea; Barella, Silvia

Influence of Powder Size on Production Parameters and Properties of Syntactic Invar Foams Produced by Means of Metal Powder Injection Moulding
pp. 118-122(5)
Authors: Weise, Jörg; Salk, Natalie; Jehring, Ulrike; Baumeister, Joachim; Lehmhus, Dirk; Bayoumi, Mohamed A.

Metal Foams with Graded Pore Size for Heat Transfer Applications
pp. 123-128(6)
Authors: Zaragoza, Gael; Goodall, Russell

Foaming of Aluminum Alloys Derived From Scrap
pp. 129-133(5)
Authors: Kumar, G. S. Vinod; Heim, Korbinian; Garcia-Moreno, Francisco; Banhart, John; Kennedy, Andrew R.

Direct Synthesis of Periodic Mesoporous SilicoBoron CarboNitride Frameworks via the Nanocasting from Ordered Mesoporous Silica with Boron-Modified Polycarbosilazane
pp. 134-140(7)
Authors: Bernard, Samuel; Majoulet, Olivier; Sandra, Fabien; Malchere, Annie; Miele, Philippe

Metal Foaming Studied In Situ by Energy Dispersive X-Ray Diffraction of Synchrotron Radiation, X-Ray Radioscopy, and Optical Expandometry
pp. 141-148(8)
Authors: Jiménez, Catalina; Garcia-Moreno, Francisco; Pfretzschner, Beate; Kamm, Paul Hans; Neu, Tillmann Robert; Klaus, Manuela; Genzel, Christoph; Hilger, André; Manke, Ingo; Banhart, John

Characterization of Cell Wall Microstructure and Damage Behavior of Alloyed Aluminum Foam via Synchrotron-Based Microtomography
pp. 149-152(4)
Authors: Zhang, Qiang; Toda, Hiroyuki; Kobayashi, Masakazu; Uesugi, Kentaro; Suzuki, Yoshio

High-Resolution Microfocus X-Ray Computed Tomography for 3D Surface Roughness Measurements of Additive Manufactured Porous Materials
pp. 153-158(6)
Authors: Kerckhofs, Greet; Pyka, Grzegorz; Moesen, Maarten; Van Bael, Simon; Schrooten, Jan; Wevers, Martine

Properties of Titanium Foams for Biomedical Applications
pp. 159-165(7)
Authors: Lefebvre, Louis-Philippe; Baril, Eric

Effect of Pore Morphology on Deformation Behaviors in Porous Al by FEM Simulations
pp. 166-169(4)
Authors: Cho, Yi Je; Lee, Wook Jin; Park, Sung Kyun; Park, Yong Ho

High Temperature Oxidation of Ni-Fe-Cr-Al Porous Metal
pp. 170-174(5)
Authors: Choi, Sung-Hwan; Oh, Jae-Sung; Yun, Jung-Yeul; Kong, Young-Min; Kim, Byoung-Kee; Lee, Kee-Ahn

Relation of Cell Uniformity and Mechanical Property of a Close Cell Aluminum Foam
pp. 175-179(5)
Author: Deqing, Wang