@article {Bru-Chevallier:2011:1533-4880:9153,
title = "InGaAs Quantum Dots Grown by Molecular Beam Epitaxy for Light Emission on Si Substrates",
journal = "Journal of Nanoscience and Nanotechnology",
parent_itemid = "infobike://asp/jnn",
publishercode ="asp",
year = "2011",
volume = "11",
number = "10",
publication date ="2011-10-01T00:00:00",
pages = "9153-9159",
itemtype = "ARTICLE",
issn = "1533-4880",
eissn = "1533-4899",
url = "https://www.ingentaconnect.com/content/asp/jnn/2011/00000011/00000010/art00112",
doi = "doi:10.1166/jnn.2011.4282",
keyword = "INGAAS, SILICON, QUANTUM DOTS, MOLECULAR BEAM EPITAXY, LIGHT EMISSION",
author = "Bru-Chevallier, C. and El Akra, A. and Pelloux-Gervais, D. and Dumont, H. and Canut, B. and Chauvin, N. and Regreny, P. and Gendry, M. and Patriarche, G. and Jancu, J. M. and Even, J. and Noe, P. and Calvo, V. and Salem, B.",
abstract = "The aim of this study is to achieve homogeneous, high density and dislocation free InGaAs quantum dots grown by molecular beam epitaxy for light emission on silicon substrates. This work is part of a project which aims at overcoming the severe limitation suffered by silicon regarding
its optoelectronic applications, especially efficient light emission device. For this study, one of the key points is to overcome the expected type II InGaAs/Si interface by inserting the InGaAs quantum dots inside a thin silicon quantum well in SiO2 fabricated on a SOI substrate.
Confinement effects of the Si/SiO2 quantum well are expected to heighten the indirect silicon bandgap and then give rise to a type I interface with the InGaAs quantum dots. Band structure and optical properties are modeled within the tight binding approximation: direct energy bandgap
is demonstrated in SiO2/Si/InAs/Si/SiO2 heterostructures for very thin Si layers and absorption coefficient is calculated. Thinned SOI substrates are successfully prepared using successive etching process resulting in a 2 nm-thick Si layer on top of silica. Another key
point to get light emission from InGaAs quantum dots is to avoid any dislocations or defects in the quantum dots. We investigate the quantum dot size distribution, density and structural quality at different V/III beam equivalent pressure ratios, different growth temperatures and as a function
of the amount of deposited material. This study was performed for InGaAs quantum dots grown on Si(001) substrates. The capping of InGaAs quantum dots by a silicon epilayer is performed in order to get efficient photoluminescence emission from quantum dots. Scanning transmission electronic
microscopy images are used to study the structural quality of the quantum dots. Dislocation free In50Ga50As QDs are successfully obtained on a (001) silicon substrate. The analysis of QDs capped with silicon by Rutherford Backscattering Spectrometry in a channeling geometry
is also presented.",
}