@article {Prolongo:2009:1533-4880:6181,
title = "Synthesis and Characterisation of Epoxy Resins Reinforced with Carbon Nanotubes and Nanofibers",
journal = "Journal of Nanoscience and Nanotechnology",
parent_itemid = "infobike://asp/jnn",
publishercode ="asp",
year = "2009",
volume = "9",
number = "10",
publication date ="2009-10-01T00:00:00",
pages = "6181-6187",
itemtype = "ARTICLE",
issn = "1533-4880",
eissn = "1533-4899",
url = "https://www.ingentaconnect.com/content/asp/jnn/2009/00000009/00000010/art00075",
doi = "doi:10.1166/jnn.2009.1554",
keyword = "CURING, CARBON NANOTUBE, EPOXY, ELECTRICAL RESISTIVITY, CARBON NANOFIBER, DMTA",
author = "Prolongo, S. G. and Gude, M. R. and Ure{\~n}a, A.",
abstract = "Epoxy nanocomposites were fabricated using two kinds of nanofiller, amino-functionalized multi-walled carbon nanotubes (CNTs) and non-treated long carbon nanofibers (CNFs). The non-cured mixtures were analysed through viscosity measurements. The effect of the nanoreinforcement on the curing process was determined by differential scanning calorimetry. Finally, the characterisation of cured nanocomposites was carried out studying their thermo-mechanical and electrical behaviour. At room temperature, the addition of CNTs causes a viscosity increase of epoxy monomer much more marked than the introduction of CNFs due to their higher specific area. It was probed that in that case exists chemical reaction between amino-functionalized CNTs and the oxirane rings of epoxy monomer. The presence of nanoreinforcement induces a decrease of curing reaction rate and modifies the epoxy conversion reached. The glass transition temperature of the nanocomposites decreases with the contents of CNTs and CNFs added, which could be related to plasticization phenomena of the nanoreinforcements. The storage modulus of epoxy resin significantly increases with the addition of CNTs and CNFs. This augment is higher with amino-functionalized CNTs due, between other reasons, to the stronger interaction with the epoxy matrix. The electrical conductivity is greatly increased with the addition of CNTs and CNFs. In fact, the percolation threshold is lower than 0.25 wt% due to the high aspect ratio of the used nanoreinforcements.",
}