Advanced Science Letters

Tracking and Detecting Moving Objects Using Stereo Camera on Moving Platform
pp. 1-9(9)
Authors: Tsai, Hung-Yin; Lin, Yen-Po; Chen, Cheng-Che

Mechanical Design of Small-Size Humanoid Robot: HIWIN MAN
pp. 10-17(8)
Authors: Wong, Ching-Chang; Chan, Hsiang-Min; Hu, Yueh-Yang; Wang, Chuan-Wei

A New Approach with Multiple Grooves for Miniaturization of Quartz Tuning Fork
pp. 18-22(5)
Authors: Liao, Kuei-Tien; Shen, Chih-Hsiung

Seismic Resistance of Precast Concrete Frame System with Hollow Column and Universal Coupler
pp. 23-29(7)
Authors: Seo, Soo-Yeon; Yoon, Seung-Joe; Yun, Hyun-do; Kim, Kang-su

Study on Coupled Acoustic Wave Propagation in a Metal Pipe for Monitoring of Gas Leakage Based on a Correlation Method
pp. 30-37(8)
Authors: Kim, Byung Hyun; Park, Jong Hong; Lee, Sang K.

Development of a Wireless Measurement and Interpretation System for 12-Lead Electrocardiogram
pp. 38-42(5)
Authors: Kuo, Cheng-Chien; Liao, Hung-Yi

Comparative Analysis of Seismic Behavior of V-Braced Frames and Suspended Zipper-Braced Frames
pp. 43-46(4)
Authors: Khiabani, Mehdi Hajaghaei; Tahir, Mahmood Md; Noor, Norhazilan Md

Evaluation of Groundwater Contamination at Melaka Catchment in Malaysia
pp. 47-53(7)
Authors: Imran, H. M.; Shirazi, S. M.

A Study on the Occurrence Cause of Flashing in the Thin-Wall Overmolding Using Mold Rapid Heating-Cooling Technology
pp. 54-59(6)
Authors: Park, Hyung-Pil; Cha, Baeg-Soon; Rhee, Byung-Ohk

A Fault Types Recognition System of Power Cable Joint by Hilbert–Huang Transform with Fractal Feature Enhancement Through Mountain Clustering
pp. 60-68(9)
Authors: Chen, Fu-Hsien; Chang, Hong-Chan; Gu, Feng-Chang; Kuo, Cheng-Chien; Hsu, Chao-Hsiang

An Investigation on Dynamic Characteristics of a Micro Diaphragm Pump
pp. 69-72(4)
Authors: Tseng, Jung-Ge; Huang, Bo Wun

Simulation Research of the Unfolding Process for UAV Folding Wings Based on CATIA and ADAMS
pp. 73-76(4)
Authors: Lv, Peng; Lv, Shengli; Yang, Guangjun; Zeng, Qingna; Tong, Xiaoyan

Formation Exchange Control of Team Robot System
pp. 77-82(6)
Authors: Su, Kuo-Lan; Li, Bo-Yi; Shiau, Sheng-Ven

Insulation Defects Identification of Power Transformers Using Artificial Neural Network Based Approach
pp. 83-89(7)
Authors: Chen, Po-Hung; Tsou, Ming-Chang

Optimal Actuation Mechanisms for a Low-Cost Road Simulator
pp. 90-94(5)
Authors: Păcurari, Radu; Brişan, Cornel

Comparison of Bending Mechanism and Spring-Back Feature Between 90-Degree L-Bending and 90-Degree V-Bending
pp. 95-100(6)
Authors: Phanitwong, Wiriyakorn; Thipprakmas, Sutasn

Solidification During Vertical Twin-Roll Casting of Magnesium Alloy
pp. 101-105(5)
Authors: Zhang, Yucheng; Wei, Dongbin; Jiang, Zhengyi

Toolpath Generation and Error Analysis for Five-Axis NC Machining of Spatial Cam
pp. 106-111(6)
Authors: Lee, Jeng-Nan; Chen, Hung-Shyong; Kung, Huang-Kuang; Sun, Yun-Ping

Mechanical Responses and Fracture Behaviors of Clad Mg/Al/STS Plates
pp. 112-117(6)
Authors: Kim, In-Kyu; Song, Jun-Young; Hong, Sun Ig

The Study on Plate Cam Fabrication and On-Line Measurement by Computer Numerical Control Machine
pp. 118-124(7)
Authors: Huang, Jen-Ching; Wu, Wei-Piao

Topology Optimization of 3D Structure for Stiffness and Natural Frequency Using Artificial Bee Colony Algorithm
pp. 125-128(4)
Authors: Chang, Dae-Ho; Park, Ji-Yong; Park, Jae-Yong; Han, Seog-Young

Effect of Vibration Absorber on Vehicle Ride Comfort
pp. 129-135(7)
Authors: Yu, Cheng-Chi; Wu, Yi-Yen

Automated Monitoring of Cable-Anchorage Force by Imote2-Platformed Impedance Sensor Node
pp. 136-140(5)
Authors: Nguyen, Khac-Duy; Lee, Po-Young; Kim, Jeong-Tae

Self-Tuning Neuro-PID Controller for Piezoelectric Actuator
pp. 141-145(5)
Author: Liu, Van-Tsai

A New Quadruped Walking Robot with a Natural Level Trajectory
pp. 146-149(4)
Authors: Chen, Chun-Ta; Lin, Chih-Jer; Zeng, Shi-Chang; Lin, Chorng-Tyan; Yang, Chun-Ming; Hong, Kuo-Kai

Viscoplastic Particle Method for Flow Simulation of Highly Flowable Mortar and Concrete
pp. 150-154(5)
Authors: Cho, Chang-Geun; Choi, Yeol; Kim, Wha-Jung; Kim, Kang-Su

Structural Vibration Control Using Controllable Damping Force of Magnetorheological Fluid Based Mount
pp. 155-160(6)
Authors: Ha, Sung Hoon; Jeon, Juncheol; Choi, Seung-Bok; Park, Young-Gee

A Temperature-Time Map of Pressure-Assisted Diffusion Bonding in Al/Cu Bimetal and Its Microstructural Study
pp. 161-164(4)
Authors: Lee, Sangmok; Lee, Geun-An; Lee, Jongsup; Kim, Young-Bae; Park, Sung Jun; Bae, Dong-Su

Atomistic Investigations of Single-Crystal Silicon with Pre-Existing Defects
pp. 165-170(6)
Authors: Fu, Q.; Zhan, H. F.; Gu, Y. T.

Support Structure Design and Optimization of Tidal Current Energy Conversion System
pp. 171-174(4)
Authors: Sun, Ke; Zhang, Jianhua; Ai, Yiduo

A Study on the Use of Multiple Surrogate Models in Valve Design
pp. 175-180(6)
Authors: Song, Xueguan; Park, Youngchul

Development of an Interactive Electrical Acupuncture Mannequin
pp. 181-185(5)
Authors: Wang, Fu-Cheng; Wang, Hsiao-Wu; Huang, Ching-Wu

Response Prediction of Offshore Floating Structure Using Artificial Neural Network
pp. 186-189(4)
Authors: Uddin, Md. Alhaz; Jameel, Mohammed; Razak, Hashim Abdul; Islam, A. B. M. Saiful

Unbounded Chaos
pp. 190-192(3)
Author: Yang, Cheng-Hsiung

Dynamic Modeling for Synthesis Error Compensation on Shaft Machining
pp. 193-198(6)
Authors: Fan, Kaiguo; Yang, Jianguo; Yang, Liyan

Development of Intelligent Model for Strength Estimation in Aluminum Remote Laser Welding
pp. 199-202(4)
Authors: Kim, Dongyoon; Park, Young Whan

A Management Framework for Autonomous and Intelligent Resources in Distributed Manufacturing Systems: A Fractal-based Approach
pp. 203-208(6)
Authors: Shin, Moonsoo; Ryu, Kwangyeol; Ryu, Taebeum; Bae, Sungmin

Robust Navigation Algorithm of the Underwater Robot in the Unknown Underwater Environment
pp. 209-217(9)
Authors: Choi, Sung Hee; Han, Sun Sin; Lee, Jang Myung

A Numerical Investigation of the Hole Expansion Test
pp. 218-221(4)
Authors: Kim, Ji Hoon; Lee, M. G.; Shin, Hyo-Dong; Kim, Daeyong

A Portable EEG Signal Acquisition System
pp. 222-226(5)
Authors: Kim, Dong-Gyu; Roh, Yong-Wan; Hong, Kwang-Seok

Corrosion Rate Evaluation of Pulse Electrochemical Polishing for Stainless Steel
pp. 227-230(4)
Authors: Kim, Young Bin; Park, Jeong Woo

Surface Prediction Model of Micro-Endmilling Based on the Geometries and Tool Runout
pp. 231-238(8)
Authors: Kim, Gun-Hee; Yoon, Gil-Sang; Cho, Myeong-Woo

Heat Transfer Analysis Inside Exhaust Port for a Hydrogen Fueled Port Injection Engine
pp. 239-243(5)
Authors: Rahman, M. M.; Hamada, Khalaf I.; Bakar, Rosli A.; Maleque, M. A.

Electromagnetic Actuator Utilizing Magnetic Film of Electroplated Alloy and Its Application to Valveless Pumps
pp. 244-248(5)
Authors: Chiu, Pin-Hsien; Yang, Ruey-Jen; Lee, Chia-Yen; Fu, Lung-Ming

Effect of Solidification Mode on Impact Toughness of ENiFe-CI Weld Metal
pp. 249-252(4)
Authors: Petchsang, Salita; Phung-on, Isaratat; Poopat, Bovornchok

Optimal Design of the Heat Spreader Applied Thermoelectric Module for Waste Heat Recovery
pp. 253-257(5)
Authors: Jang, Jiin-Yuh; Tsai, Ying-Chi; Huang, You-Cheng

Intelligent Motion Control of Sewing Needle Based on Adaptive Algorithm
pp. 258-261(4)
Authors: Ma, Cui; Xie, Xiaohui; Sun, Qiang; Du, Ruxu

Behaviour of Precast Concrete Beam-Column Connections Using Steel Plate and ECC
pp. 262-268(7)
Authors: Choi, Hyun-Ki; Bae, Baek-il; Choi, Yun-Cheul; Choi, Chang-Sik

Nonlinear Vibration Analysis of Nonlocal Elastic Multi-Walled Carbon Nanotubes
pp. 269-273(5)
Author: Kuo, Yong-Lin

Pitch-Catch Guided Waves-Based Concrete Strength Monitoring Using an Embedded Smart Sensor Module
pp. 274-277(4)
Authors: Kim, Dong Jin; Park, Seunghee; Hong, Seok Inn; Lee, Changgil

Sintering and Mechanical Properties of MgO-Doped HA Bioceramic
pp. 278-280(3)
Authors: Ramesh, S.; Tolouei, R.; Amiriyan, M.; Tan, C. Y.; Sopyan, I.; Hamdi, M.; Purbolaksono, J.; Teng, W. D.

Electrochemical Micro Deburring of Tunnel Weaving Reeds for Air Jet
pp. 281-284(4)
Author: Kim, Jeong-Du

Development of the Complementation Gas Detection System
pp. 285-289(5)
Authors: Su, Kuo-Lan; Chung, Cheng-Yun; Liao, Yi Lin

Torque Control of a New Haptic Master for Surgical Robot System Featuring Electrorheological Fluid Based Spherical Joint
pp. 290-294(5)
Authors: Cho, Han-Jun; Oh, Jong-Seok; Choi, Seung-Bok

In-Situ Melting Assessment of AZ91D Granules by Thermal Analysis
pp. 295-298(4)
Authors: Jafari, Hassan; Idris, Mohd Hasbullah; Ourdjini, Ali; Farahany, Saeed

Impact Simulation of Rubber Ball for Standardized Heavy Weight Floor Impact Sources
pp. 299-303(5)
Authors: Hwang, Shun-Fa; Chen, Chao-Wen; Chung, Sung-Chin; Tsay, Yaw-Shyan

Experimental Investigation of Operating Temperature on Deposition Temperature in Spray Drying Chamber
pp. 304-309(6)
Authors: Chiawchanwattana, Cherdpong; Wongpichet, Seree; Triratanasirichai, Kittichai

Prioritizing Processes and Selecting Parameters for Control Charts Implementation
pp. 310-315(6)
Authors: Rojanarowan, Napassavong; Jirasettapong, Prapasak

A Novel Route Analysis Method Based on Landmark Objects
pp. 316-320(5)
Author: Yu, Fengchi

Analytical Study of Reinforced Concrete Flexural Beams Under Fatigue Loading
pp. 321-331(11)
Authors: Liu, Te-Hung; Chen, How-Ji; Huang, Chung-Ho

Chloride Ion Diffusion Model of the Concrete Under Multiple Factors
pp. 332-335(4)
Authors: Niu, Ditao; Yuan, Chengfang; Luo, Da Ming

A Perspective on Properties of Low Thermal Lime - Hull Ash Adobe
pp. 336-339(4)
Authors: Namboonruang, W.; Rawangkul, R.; Yodsudjai, W.; Suphadon, N.

A Selective Channelization Synthesis of Efficient Deadlock Avoidance Policy for Flexible Manufacturing Systems
pp. 340-343(4)
Authors: Huang, Yi-Sheng; Row, Ter-Chan

Clustering Approach on Concept Diagram of Statistics Learning
pp. 344-347(4)
Authors: Lin, Yuan-Horng; Yih, Jeng-Ming; Tsai, Meng-Xian

Synchronization and Control of Chaos in Four Dimensions Chen System via Nonlinear Control
pp. 348-351(4)
Author: Yang, Cheng-Hsiung

High Temperature Oxidation of Coatings Prepared on Fe-15Cu-10Al Alloys with Controlled Microstructures
pp. 352-355(4)
Authors: Zhang, Honghua; Xiang, Junhuai; Wang, Wei; Shi, Yajuan

Reliable Analysis and Power Control for the Nontraditional Cutting Methodology on the CO₂ Laser Machine
pp. 356-359(4)
Authors: Lee, Kuang-Chyi; Wang, Ching-Kuo; Shieh, Cheng-Han

Wave Data for Shallow and Deep Water Sedimentary Basins of Malaysia
pp. 360-364(5)
Authors: Jameel, Mohammed; Islam, A. B. M. Saiful; Salman, Firas A.; Khaleel, M.; Jumaat, M. Z.

Kinematic Modeling of a 3-DOF Translational Parallel Manipulator
pp. 365-369(5)
Authors: Chiang, Mao-Hsiung; Lin, Hao-Ting

Real-Time Marine Engine State Monitoring Using Fuzzy-Based Dynamic CAN Priority
pp. 370-374(5)
Authors: Lee, Hyun; Lee, Howon; Lee, Jang-Myung

Developing a Practical Geothermal Indoor Heating, Ventilation and Air Conditioning System
pp. 375-379(5)
Authors: Sung, Wen-Pei; Chen, Ting-Yu; Shih, Ming-Hsiang; Zhao, Yu-Kuang

Study on Rock Damage Process Based on Least Energy Consumption Principle
pp. 380-383(4)
Authors: Gao, Wei; Wang, Lei; Yang, Dayong

A Numerical Simulation of Elastic Waves for Defect Detection in Composite Plates
pp. 384-388(5)
Authors: Kim, Jong-Kyu; Woo, Jinho; Na, Won-Bae

Deep Drawing Modeling of Controlled Forming Parameters Using Surface Response Methodology
pp. 389-393(5)
Authors: Chu, Tsuhsiao; Fuh, Kuanghua; Yeh, Weiching

A Process Monitoring Method for Self-Piercing Riveting
pp. 394-397(4)
Authors: He, Xiaocong; Gu, Fengshou; Ball, Andrew

Performance Evaluation of Tensile Lap Splicing Glass Fiber-Reinforced Polymer Reinforcing Bar in Concrete Beam
pp. 398-403(6)
Authors: Choi, Yun-Cheul; Choi, Hyun-Ki; Choi, Chang-Sik

Advanced Nano-Scale Process Control Using the Back-Propagation Network and Dual Filter Exponentially Weighted Moving Average
pp. 404-408(5)
Authors: Park, Sang-Hoon; Ko, Hyo-Heon; Kim, Min-Seok; Kim, Jun-Seok; Park, Cheong-Sool; Kim, Sung-Shick; Baek, Jun-Geol

Design of Taste Masked Dextromethorphan Through Incorporation Into Shellac-Based Matrix
pp. 409-412(4)
Authors: Limmatvapirat, Sontaya; Piyawatakarn, Piyapoom; Tabtimsri, Sugannika; Sriamornsak, Pornsak; Nunthanid, Jurairat; Limmatvapirat, Chutima

I/O Optimizations for Hybrid File System Integrated with NAND-Flash SSD
pp. 413-418(6)
Author: No, Jaechun

Quality Assessment Model for Processing Organic Light-Emitting Diode Displays
pp. 419-424(6)
Authors: Chen, Kuen-Suan; Wang, Ching-Hsin; Chang, Peng-Hsiang; Wu, Hsing-Ju

Tension Stiffening Behavior of Strain-Hardening Cement Composite (SHCC) Ties in Monotonic and Cyclic Loadings
pp. 425-430(6)
Authors: Yun, Hyun-Do; Yang, Hae-Jun; Kang, Su-Won; Seo, Soo-Yeon; Kim, Kang-Su

A Synthesized TiO2 Coated Sieve in a Photocatalytic Reactor for Deactivating Bioaerosol in Air
pp. 431-435(5)
Authors: Chang, Yu-Jie; Lee, Yao-Chuan; Lin, Ching-Hsing; Hwa, Mei-Yin; Lee, Jyh-Wei

Rapid Tooling for Electrical Discharge Machining
pp. 436-439(4)
Author: Singamneni, Sarat

Effect of Micro-Climatic Condition on Durability of Concrete
pp. 440-443(4)
Author: Yoon, In-Seok

Innovative Fabrication of Micro and Nano Hybrid Structure and Application in Optical Films
pp. 444-449(6)
Authors: Tsai, Hung-Yin; Liu, Ching-Wen

Motion Analysis of Wrist and Hand Movements During Functional Tasks
pp. 450-454(5)
Authors: Ting, Cheah Jer; Jauw, Veronica Lestari; Parasuraman, S.

Flexural Performance of Laminated Composite Plates with Diagonally Perturbed Localized Delamination
pp. 455-457(3)
Authors: Kam, Chee Zhou; Kueh, Ahmad Beng Hong; Shek, Poi Ngian; Tan, Cher Siang; Tahir, Mahmood Md

A New Nonlinear Self-Tuning Run-to-Run Controller for the Semiconductor Manufacturing Process
pp. 458-463(6)
Authors: Park, Cheong-Sool; Kim, Jun Seok; Park, Sang-Hoon; Yun, Jae-Jun; Baek, Jun-Geol

Attitude Control of Miniature Spacecraft Using a Micro-Actuator
pp. 464-467(4)
Author: Kuo, Yong-Lin

Identification of Index Value for Fatigue Features Using K-Means Clustering Approach
pp. 468-470(3)
Authors: Abdullah, Shahrum; Yunoh, Mohd Faridz Mod; Jalar, Azman; Nopiah, Zulkifli Mohd

Extension of CV-GWMA Control Chart with Fast Initial Response Feature
pp. 471-476(6)
Authors: Hong, Eui Pyo; Kang, Chang Wook; Kang, Hae Woon

Numerical Simulation the Delamination of North China Craton
pp. 477-478(2)
Authors: Qiao, Yanchao; Guo, Ziqi; Shi, Yaolin

ACVT Fixed-Speed Control for Wind-Power Fluctuations
pp. 479-482(4)
Author: Huang, Chung-Neng

The Generalized Synchronization of a Quantum-CNN Chaotic Oscillator with a Double Duffing Chaotic System
pp. 483-486(4)
Author: Yang, Cheng-Hsiung

Applicability of Ground Penetrating Radar Exploration Technique for the Diagnosis of Concrete Structures
pp. 487-490(4)
Authors: Uk, Hong Seong; Hyuk, Lee Je; Han, Kim Jeom; Sang, Cho Young

A Novel Dynamical Method for Solving Ill-Conditioned Nonlinear Ordinary Differential Equations
pp. 491-494(4)
Authors: Ku, Cheng-Yu; Chan, I-Yao; Yeih, Weichung

Magnetorheological Fluid Shock Absorber for Electronic Control Suspension of a Passenger Vehicle
pp. 495-498(4)
Authors: Sung, Kum-Gil; Choi, Seung-Bok

Dependence of Pressure Die Casting Quality on Die Casting Plunger Velocity Inside a Filling Chamber of a Pressure Die Casting Machine
pp. 499-502(4)
Authors: Gašpár, Štefan; Paško, Ján; Malik, Jozef; Panda, Anton; Jurko, Jozef; Mašèenik, Jozef

A New Tool Wear Monitoring Method Based on Project Pursuit Regression
pp. 503-506(4)
Authors: Guo, Qianjian; He, Lei; Yu, Shanshan

A Study of Using ZnB Nanoparticles and SWCNT to Enhance Flame Retardance of Fire-retardant Coating
pp. 507-512(6)
Authors: Chang, Ho; Chang, Hong-Ming; Chen, Tien-Li; Tsai, Kuang-Chung; Kuo, Zi-How