Advanced Science Letters

Effect of Slot Geometry on the Impact Response of Square Column
pp. 1-7(7)
Authors: Ghani, Amir Radzi Ab.; Hassan, M. A.; Taha, Zahari; Hamdi, M.

Micro Incremental Forming of a Herringbone Pattern for a Rotating Shaft Considering Elastic Recovery
pp. 8-14(7)
Authors: Song, Jung Han; Lee, Hye Jin; Park, Sung Jun; Kim, Jeong Bae; Lee, Hyoung Wook

Fuzzy Multiple Performance Characteristics Index Based Optimization in TFTLCD Short Bar Attach Process
pp. 15-26(12)
Authors: Kuo, Jian-Long; Hsieh, Chung-Hao

An Analytical Study of Spiral Type Shear Reinforcement Considering Bond Stress
pp. 27-32(6)
Authors: Chung, Joo-Hong; Jung, Hyung-Suk; Choi, Chang-Sik

Application of Progressive Molding Process and Finite Element Method to Fabrication of Titanium Alloy Sprockets for Bicycle
pp. 33-39(7)
Authors: Park, Jin-Sung; Seo, Tae-Il; Yoon, Gil-Sang

Effect of Gold-Ball Bonding Parameters on Ball Shear and Wire Pull for Reducing Gold Consumption
pp. 40-45(6)
Authors: Tsai, Ming-Yi; Liu, Rong-Gui

Finite Element Analysis of Design Parameters for High-Performance Hybrid Coupled Shearwall Joint
pp. 46-51(6)
Authors: Bae, Baek-Il; Choi, Hyun-Ki; Choi, Chang-Sik

A Study on the Roll Gap Set-Up to Compensate for Temperature Drop at the Front-End in Plate Rolling
pp. 52-55(4)
Authors: Joo, Byeong Don; Yim, Hong Sup; Jang, Jeong Hwan; Seo, Jae Hyung; Moon, Young Hoon

Temperature Control of Solid Oxide Fuel Cell Using a Reference Model During Load-Tracking Process
pp. 56-61(6)
Authors: Chiang, Mao-Hsiung; Yu, Dung-Di

Inter Electrode Gap in Pulse Electrochemical Process for Local Oxidation of (100) Si Wafer
pp. 62-65(4)
Authors: Lee, Jeong Min; Park, Jeong Woo

Effect of Gold-Ball Bonding Parameters on Ball Shear and Wire Pull for Reducing Gold Consumption
pp. 66-72(7)
Authors: Tsai, Ming-Yi; Liu, Rong-Gui

Application of an Innovative Process Technology for Phase Shift Mask in Near-Field Phase Shift Lithography
pp. 73-79(7)
Authors: Hsu, Hsiang-Yu; Weng, Yung-Jin; Huang, Jung-Tang; Yang, Sen-Yeu

A Novel Computer Vision System for Color Classification of Silicon Solar Cells
pp. 80-83(4)
Authors: Yen, Hsu-Nan; Chiu, Chih-Yi

Computer-Aided Mobile Robot Control Based on Visual and Fuzzy Systems
pp. 84-89(6)
Authors: Juang, Jih-Gau; Lo, Chi-Wen

An Analysis of the Relationship Between Suspension Geometry and Ride Characteristics
pp. 90-98(9)
Authors: Yu, Cheng-Chi; Hsu, Wei-Feng

Development and Application Oil Pressure for On-Line Monitoring Systems of a 161 kV Oil-Filled Cable
pp. 99-104(6)
Authors: Chen, Ming-Tang; Hsiao, Sheng-Jen; Shiu, Yi-Feng

Local Damage Evaluation Technique Using Elasto-Magnetic Sensors Operated on a Cable Climbing Robot
pp. 105-109(5)
Authors: Kim, Ju-Won; Lee, Jong-Han; Lee, Changgil; Park, Seunghee; Kim, Dong-Jin; Lee, Jong-Jae

Temperature-Compensated Impedance Monitoring of Steel Girder Connections Using Wireless Sensor Node
pp. 110-114(5)
Authors: Hong, Dong-Soo; Ho, Duc-Duy; Kim, Jeong-Tae

Stress Block Parameters for Steel Fiber Reinforced Reactive Powder Concrete
pp. 115-119(5)
Authors: Bae, Baek-il; Choi, Hyun-Ki; Choi, Chang-Sik

Design and Implementation of Performance Evaluation System for Fluid Hydrodynamic Bearing in HDD
pp. 120-125(6)
Authors: Lee, Hyejin; Lee, Hyoungwook; Kang, Jungwoo; Park, Sung-Jun

Multi-Step Cure Process for Void-Free Silicone Resin Encapsulant
pp. 126-131(6)
Authors: Song, Min-Jae; Kim, Kwon-Hee; Yoon, Gil-Sang; Kim, Heung-Kyu

Hybrid Control System for Compensation of the Force Ripple in Permanent Magnet Linear Motor
pp. 132-136(5)
Authors: Kim, Kyoungchon; Kim, Jungjae; Choi, Young-Man; Gweon, Daegab

A DMADV Approach to Optimization of Night-Vision System Assembly
pp. 137-145(9)
Authors: Chen, Kuen-Suan; Wang, Ching-Hsin; Wu, Chi-Feng

The Behavior of High-Strength Square Steel Tube Columns Filled with Concrete
pp. 146-151(6)
Authors: Jung, Hyung-Suk; Chung, Joo-Hong; Choi, Chang-Sik

Development of a Multiscale Machining Compound Mesoscale Machine Tool (MMT) Platform
pp. 152-157(6)
Authors: Kong, Kyungil; Kim, Hyun Myung; Kim, Dong Min; Park, Hyung Wook

An Application of Lean Design of Structural Floor System Using Structural Building Information Modeling (S-BIM)
pp. 158-164(7)
Authors: Lee, Seung-Il; Cho, Young-Sang

A Bi-Directional Magneto-Rheological Brake for Medical Haptic System: Optimal Design and Experimental Investigation
pp. 165-172(8)
Authors: Nguyen, Phuong-Bac; Choi, Seung-Bok

Preliminary Design of a Vortex Pool for Electrical Generation
pp. 173-177(5)
Authors: Wanchat, Sujate; Suntivarakorn, Ratchaphon

Stainless Steel Surface Etching Morphologies Using Electro Plasma Technology
pp. 178-182(5)
Authors: Lin, Ah-Der; Hsu, Chao-Ming; Chen, Chich-Kuan; Huang, Da-Yun; Hung, Tsung-Pin; Kuang, Jao-Hwa

Double Generally Weighted Moving Average Control Chart for Demerit Statistics
pp. 183-188(6)
Authors: Kang, Hae Woon; Baik, Jae Won

A Study on Electronically Controlled Continuously Variable Transmission for Motor Scooters
pp. 189-192(4)
Author: Kuo, Kei-Lin

AFM Based Mechano-Chemical Hybrid Surface Modification Process on PR-Coated Silicon Wafer
pp. 193-198(6)
Authors: Kim, Sun Ho; Park, Jeong Woo

Automatic Knowledge Acquisition Tool to Support Intelligent Manufacturing Systems
pp. 199-202(4)
Authors: Kerdprasop, Kittisak; Kerdprasop, Nittaya

Enhancing Interfacial Bond Between PP and Cement Hydrates
pp. 203-207(5)
Authors: Chou, Liang-Hsign; Tung, Jhih-Long; Lee, Maw-Tien

Stereo Vision-Based Early Fire Detection and Extinguishing System
pp. 208-212(5)
Authors: Ho, Chao-Ching; Hsiao, Chun-Wei

DC Motor Fault Recognition Using Multi-Resolution Analysis and Neural Network
pp. 213-218(6)
Authors: Chen, Po-Hung; Lin, Hung-Chi; Tseng, I-Hsiang

Modelling of Temperature-Dependent Growth Kinetics of Oxide Scale on Hot-Rolled Steel Strip
pp. 219-223(5)
Authors: Yu, Xianglong; Jiang, Zhengyi; Wei, Dongbin; Wang, Xiaodong; Yang, Quan

Prediction of Nonlinear Kinematic Hardening Parameters for DP Steels by Crystal Plasticity-Based Micromechanical Analysis
pp. 224-227(4)
Authors: Kim, J. H.; Lee, M. G.; Barlat, F.; Kim, D.

Electrical Current Representation of Cemented Soil in Compression Damage Process
pp. 228-232(5)
Authors: Dong, Xiao-Qiang; Bai, Xiao-Hong; Lv, Yong-Kang; Huang, Xin-En; Park, Jun-Boum

Research on Thermocouple Embedded Position for Mould Copper Plate with High Casting Speed by FEM Model
pp. 233-239(7)
Authors: Sun, Ligen; Li, Huirong; Zhang, Jiaquan

The Strength and Thermal Stability of Low-Density Polyethylene Grafted Maleic Anhydride/Montmorillonite Nanocomposites
pp. 240-244(5)
Authors: Chang, Ming-Kuen; Wei, He-Lin; Wu, Kuan-Shen

The Development of Tri-Rotor Aerial Vehicle
pp. 245-250(6)
Authors: Zou, Jie-Tong; Tso, Haw

Seismic Performance of Shear Connections in Fiber-Reinforced Strain-Hardening Cement Composite (SHCC) Under Cyclic Loading
pp. 251-256(6)
Authors: Yun, K. H.; Yun, H. D.; Ryu, S. H.

Study on Oxidation of Calcium Sulfite in Dual Alkali Flue Gas Desulfurization System
pp. 257-262(6)
Authors: Mbida, K. G. Mbango; Yi, Song Cun; Qin, Chang Guan; Lidong, Zhang

Parametric Simulation of Triple-Pressure Reheat Combined Cycle: A Case Study
pp. 263-268(6)
Authors: Ibrahim, Thamir K.; Rahman, M. M.

Optimal Magnet Pole Design for Cogging Torque Reduction of Interior Permanent Magnet Synchronous Motor Using Response Surface Method
pp. 269-272(4)
Author: Chen, Hung-Cheng

Deformability of Embedded Stud Connection Between Reinforced Concrete Wale and Steel Beam
pp. 273-278(6)
Authors: Seo, Soo-Yeon; Kim, Seung-Hun

Faults Diagnosis System of DC Motors Based on Empirical Mode Decomposition Model
pp. 279-284(6)
Authors: Lee, Chun-Yao; Hsieh, Yu-Hua; Lin, Hung-Chi; Shen, Yi-Xing

Modelling of 2D Cutting Tool Forces in Micro Tool Using FEA-ABAQUS
pp. 285-290(6)
Authors: Ng, Y. K.; Shukor, S. F.; Baharudin, B. T. H. T.

Influence of Blank Profile on the U-Bending Micro Drawing Process of Stainless Steel
pp. 291-299(9)
Author: Chen, Tsung-Chia

Investigation of Machined Surface in End-Milling Operation of Hastelloy C-2000 Using Uncoated-Carbide Insert
pp. 300-305(6)
Authors: Razak, N. H.; Rahman, M. M.; Kadirgama, K.

Effects of Low Frequency Electromagnetic Field of Multi-Physical Fields During DC Casting of 7XXX Aluminum Alloys
pp. 306-311(6)
Authors: Zhang, Haitao; Nagaumi, Hiromi; Cui, JianZhong

Microbiologically Influenced Corrosion of X-70 Carbon Steel by Desulfovibrio Vulgaris
pp. 312-316(5)
Authors: Noor, Norhazilan Md; Yahaya, Nordin; Abdullah, Arman; Tahir, Mahmood Md.; Sing, Lim Kar

Multidimensional Computational Modeling of Direct Injection for Hydrogen Fueled Engine
pp. 317-321(5)
Authors: Hamada, Khalaf I.; Rahman, M. M.; Aziz, A. Rashid A.

A Medical Haptic Master Featuring Bi-Directional Clutch and Brake Using Electro-Rheological Fluid
pp. 322-326(5)
Authors: Lim, Seung-Gu; Oh, Jong-Seok; Nguyen, Phuong-Bac; Choi, Seung-Bok

Assessment of High Transparency Nanocrystalline TiO₂ Thin Films and Their Photocatalytic Removal of Pollutant Dye
pp. 327-331(5)
Authors: Leotphayakkarat, Rachan; Fangern, Nitikarn; Gleeson, M. Paul; Sanguanruang, Sudjit

Dissemination of Production Technology Using Manufacturing Knowledge Sharing Platform System
pp. 332-338(7)
Authors: Son, Soo Hyun; Bae, Sung Min

Design of Supervisor for Automated Manufacturing Systems Using Finite State Automata
pp. 339-342(4)
Authors: Huang, Yi-Sheng; Chiang, Ho-Shan; Tan, Kuang-Hsiung

Chaos Control of New Microelectromechanical System
pp. 343-346(4)
Author: Yang, Cheng-Hsiung

Study of Human's Motor Control Model Using 2 Degree of Freedom Target Tracing
pp. 347-350(4)
Authors: Kim, Joonsik; Kim, Jungsu; Kim, Jaehyo

Optimization of Manufacturing Conditions for Drum Clutch Hub Using Taguchi Method
pp. 351-355(5)
Authors: Kim, Seung-Gyu; Park, Joon-Hong; Baek, Seung-Gul; Park, Young-Chul

Realistic Implementation of the Facial Tracking and the Scenario Interaction on Android Robot
pp. 356-359(4)
Author: Wang, Ching-Kuo

Finite Element Analysis on Vibration of Nanorods with Heterogeneous Property and Non-Uniform Cross Section
pp. 360-363(4)
Author: Chang, Tai-Ping

Seismic Vulnerability Index for Reinforced Concrete Construction in Algeria
pp. 364-368(5)
Authors: Belheouane, Fatma Imene; Bensaibi, Mahmoud

Parameters Calibration and Mode Construction for Computer Numerical Control Grinding Machine Using FEM and Laser Measurement
pp. 369-372(4)
Authors: Lin, Jui-Chang; Lee, Kingsun; Lin, S. Y.

Numerical Modeling of Composite Materials for the Alleviation of Manhole Decrement Into Pavement
pp. 373-376(4)
Authors: Lin, Jyh-Dong; Chen, Hao-Hsien; Huang, Wei-Hsing; Weng, Yi-Wei; Yeh, Li-Hsu; Sung, Po-Hsun

Magnetic Nanoparticle-Assisted In Vitro Blood Flow Manipulation and Flow Monitoring with Confocal Microscopy
pp. 377-381(5)
Authors: Lee, Ho; Oh, Junghwan

On Improving PP Reinforced Cement-Based Composite
pp. 382-386(5)
Authors: Chou, Liang-Hsign; Su, Li-Wen

Optimized Analysis and Mechanical Design of the Biped Robot with Nontraditional Ultrasonic Motors
pp. 387-391(5)
Author: Wang, Ching-Kuo

FEM Analysis of Airport Flexible Pavements Reinforced with Geogrids
pp. 392-395(4)
Authors: Buonsanti, Michele; Leonardi, Giovanni

Elastance-Based Mock Circulatory System Augmented with Gear Pump Controlled Preload
pp. 396-399(4)
Authors: Gwak, Kwan-Woong; Paden, Brad E.

Autofluorescence Approaches to Observation of Mycorrhizal Colonization in Five Orchids
pp. 400-405(6)
Authors: Lee, Ming-Chih; Hsu, Jung-Huei; Cheng, Shu-Fen; Chang, Doris C. N.; Shen, Wei-Chiang; Chang, Yu-Sen

The Influence of Electromagnetic Propagation in Nonuniformity Optical Waveguide
pp. 406-409(4)
Authors: Syuhaimi, Mohammad; Ater, Foze; Mohammad, Rahmah

Influence of Strain Rate on Tensile Strength and Deformation Behavior of Nano-Copper Single Crystal
pp. 410-416(7)
Author: Huang, Jen-Ching

Experimental Performance of Soil Hook System as an Innovative Soil Anchors in Sand
pp. 417-419(3)
Authors: Niroumand, Hamed; Kassim, Khairul Anuar

Robust Multi-Criteria Optimal Design for Improving the Yield of BGA Packaging
pp. 420-426(7)
Authors: Hsien, Kuang-Hung; Huang, Shyh-Chour

A Comparative Study of Fuzzy Conditional Random Fields for Bathroom Activity Recognition
pp. 427-430(4)
Authors: Cho, Po-Chuan; Chen, Wen-Hui; Liu, Shen-Ing

Stress Transfer in Single-Walled Carbon Nanotubes
pp. 431-435(5)
Authors: Her, Shiuh-Chuan; Liu, Shou-Jan

Intelligent Position Control of a Variable Rotational Speed Hydraulic Pump-Controlled System
pp. 436-441(6)
Authors: Chiang, Mao-Hsiung; Wu, Bin-Yin

Object Tracking Based on Hardware/Software Co-Design of Particle Filter
pp. 442-446(5)
Authors: Li, Shih-An; Hsu, Chen-Chien; Lin, Wen-Ling; Wang, Jui-Pin

Mechanical Property Degradation of Laser Welded Boron Steel Sheet in Hot Press Forming
pp. 447-450(4)
Authors: Kim, Daeyong; Kim, Ji Hoon; Lee, M. G.; Kim, Young Il

Studying on Yield-Surface Rheological Model of Artificially Frozen Soil Under Unloading States
pp. 451-456(6)
Authors: Li, Dong-Wei; Fan, Ju-Hong; Wang, Ren-He

A Novel Single-Stage Isolated Burn-in Test Equipment with High Energy Recovery
pp. 457-462(6)
Authors: Huang, Li-Chien; Chang, Hong-Chan; Kuo, Cheng-Chien; Chen, Cheng-Chuan

A High Precision Control Based on Learning Algorithm with Reference Model and Disturbance Observer
pp. 463-467(5)
Authors: Hashimoto, Seiji; Saitou, Hiroyuki; Nakajima, Kenji

The Field-Dependent Hysteresis and Fatigue Properties of Electrorheological Fluid: Experimental Results
pp. 468-473(6)
Authors: Ha, Sung Hoon; Seong, Min-Sang; Shon, Jung Woo; Choi, Seung-Bok; Han, Moon Sik

Nanoindentation Stereometry of Wire Bonding
pp. 474-477(4)
Authors: Zulkifli, Muhammad Nubli; Jalar, Azman; Abdullah, Shahrum; Othman, Norinsan Kamil

Curling Effect on Structural Behaviors of Single Shear Two-Bolted Connections with Austenitic Stainless Steel
pp. 478-481(4)
Authors: Lim, JinSeong; Kim, TaeSoo

Parametric Study of Specific Buckling Load of Cylindrical Grid Stiffened Composite Shells
pp. 482-485(4)
Authors: Alavijeh, Hamid Shahsavari; Sadeghnejad, Soroush; Sadighi, Mojtaba

A Uniformity Control Chart for Edge Exclusion Processes
pp. 486-490(5)
Authors: Baik, Jae Won; Kang, Hae Woon

Ductility and Bond Characteristics of Steel Fiber-Reinforced Concrete Members Subjected to Shear
pp. 491-494(4)
Authors: Hwang, Jin-Ha; Lee, Deuck Hang; Kim, Kang Su; Yun, Hyun-Do; Seo, Soo-Yeon; Cho, Chang-Geun

Autopilot System for Continuously Variable Transmission Motorcycles
pp. 495-500(6)
Authors: Shiao, Yaojung; Chen, Chien-Lin

Bacterial Adhesion on Optic Waveguide Thin Film
pp. 501-504(4)
Authors: Chien, Hsi-Hsin; Ramsden, Jeremy J.; Yeh, Yun-Peng

Implementation of User Supplied Constitutive Law for the Analysis of Hyper-Elastic Pipe Flow Using the Fluid-Structural Interaction Method
pp. 505-508(4)
Authors: Kim, Seungwook; Hwang, Uisik; Sung, Moon Hyun; Cho, Seong Wook

Derivation of Relation Formula for Developing Load Cell-Type Anemometer
pp. 509-513(5)
Author: Han, Dong-Seop

Study on Casting Composite Ingot of 4045/3004/4045 Aluminum Alloys
pp. 514-518(5)
Authors: Jiang, Huixue; Qin, Ke; Cui, Jianzhong

The Effects of Different Grades of Hob Cutter in Determining Gear Tooth Accuracy
pp. 519-524(6)
Authors: Ariffin, M. K. A.; Sulaiman, S.; Tang, S. H.; Rosdi, M.; Mohamed, S. B.

Alteration of Molecular Weight in the Resin Matrix in Relation to Fade and Wear in a Semi-Metallic Brake Pad
pp. 525-533(9)
Authors: Balaji, M. A. Sai; Kalaichelvan, Dr. K.; Sreenivasan, M.; Thiyagarajan, V.

Probability Distribution of Arm Trajectory for Motion Estimation and Gesture Recognition
pp. 534-539(6)
Authors: Wan, Khairunizam; Aziz, Azri Abdul; Ab, Shahriman; Zaaba, Siti Khadijah; Ibrahim, Zuwairie; Yusof, Zulkifli Md.; Ibrahim, Ismail; Mukred, Jameel Abdulla Ahmed; Mokhtar, N.

Vibration Control of Quarter Vehicle Magnetorheological Suspension Using Preisach Hysteretic Compensator
pp. 540-546(7)
Authors: Seong, Min-Sang; Choi, Seung-Bok; Lee, Yang Seob

Carbon Nanotubes Reinforced Nanocomposite Films Characterized by Nanoindentation Technique
pp. 547-550(4)
Authors: Her, Shiuh-Chuan; Shiu, Ting-Yu

Isolation and Heterotrophic Growth Characterization of Freshwater Microalgae
pp. 551-555(5)
Authors: Lin, Jun-Hong; Haung, Sheng-Fong; Lin, Kuan-Der

Prediction Technique of Concrete Compressive Strength Using Ultrasonic Pulse Velocity Method and Spectral Analysis of Surface Wave Method
pp. 556-559(4)
Authors: Uk, Hong Seong; Suk, Jang Hyun; Ki, Back Sang; Sang, Cho Young

Disposable Polymeric Electromagnetic Actuated Micropump
pp. 560-564(5)
Authors: Chee, Pei Song; Arsat, Rashidah; Hashim, U.; Rahim, Ruzairi Abdul; Leow, Pei Ling

Design of Briquettizing Machine for Biomass Briquette Fuel
pp. 565-569(5)
Authors: Sakkampang, Chatcharin; Wongwuttanasatian, Tanakorn

Connecting Productivity Index to Shop-Floor Manageable Indices to Enhance Competitiveness of Manufacturing Industry
pp. 570-574(5)
Authors: Son, Soo Hyun; Seo, Shin Won; Lee, Hyoung Wook; Bae, Sung Min

Mechanical Properties Changes of Nanosilica Filled Solventborne Polyamide Binder After Accelerated Weathering Exposure
pp. 575-578(4)
Authors: Chee, Ching Yern; Ching, Yun Chen; Yaacob, Iskandar

Bootstrap-Based Multivariate Control Charts in Thin Film Transistor Liquid Crystal Display Manufacturing Processes
pp. 579-583(5)
Authors: Kang, Ji Hoon; Lee, Kyu Jong; Son, Jung Hwan; Hyun, Seog Sang; Kim, Hyoung Kyoon; Hwang, Gi Don; Kim, Seoung Bum

Application of Biodegradable Surfactant Washing to Remediate Total Petroleum Hydrocarbons-Contaminated Sediments
pp. 584-587(4)
Authors: Chen, C. T.; Yang, Z. H.; Chen, C. W.; Dong, C. D.; Kao, C. M.

The Application of Gray System and Analytic Hierarchy Process to the Occupational Safety Management of Construction Industry
pp. 588-595(8)
Authors: Wang, Chen-Hua; Hsu, Ming-Tsai

Surface Properties Comparison Between Al Films and TiN Films Deposited on Magnesium Alloys by Magnetron Sputtering
pp. 596-600(5)
Authors: Chen, Yingchuan; Zhu, Xiangrong; Bing, Naici; Wei, Zhongling; Chen, Qiurong

Research on Developing Automation System to Remove Line-Stripe on the Roadway
pp. 601-605(5)
Authors: Lee, Tai Sik; Park, Eun Soo

Pulse Input Response of Uncooled Laser Diodes
pp. 606-610(5)
Authors: Ab-Rahman, Mohammad Syuhaimi; Hassan, Mazen Radhe; Shaktur, Khaled Mohamed

Improving Energy-Saving System of Building Heating, Ventilation and Air Conditioning, Water Heating and Lighting
pp. 611-615(5)
Authors: Sung, Wen-Pei; Chen, Ting-Yu; Wang, Hsien-Jung; Wang, Ben-Li; Hsieh, Bo-Wei

Effect of Mechanical Alloying Time and Ball-Powder Weight Ratio on Synthesis of MoSi₂–Mo₅Si₃ Nanocomposite
pp. 616-619(4)
Authors: Shafiee, Mohammad Reza Mohammad; Zamani, Shahrooz; Rad, Hamid Reza Bakhsheshi

Experimental Investigation on Locally Produced Cold-Formed Steel Sections for Roof Truss System
pp. 620-623(4)
Authors: Ngian, Shek Poi; Tahir, Mahmood Md; Siang, Tan Cher; Hong, Ahmad Kueh Beng; Mohammad, Shahrin

Dispersion Polymerized Inorganic Black Pigment Encapsulation and Its Electrophoretic Response
pp. 624-627(4)
Authors: Hong, Sun Young; Sim, Hyung Hoon; Choi, Hyoung-Jin

Properties of Ni–Co Alloy Coating Prepared by Pulsed and Pulsed Reverse Current
pp. 628-631(4)
Authors: Liu, Lei; Yang, Haifeng; Hao, Jingbin; Qian, Jiguo; Zhu, Hua; Ge, Shirong

Effect of Micro Pattern and Octadecyltrichlorosilane Self-Assembled Monolayer on Nano/Macro-Scale Friction and Adhesion
pp. 632-636(5)
Authors: Liu, Si Si; Zhang, Chao Hui; Zhang, Han Bing; Ming, Er Yang; Geng, Ming

Angle Control of a Variable Displacement Hydraulic Motor Using a Self-Tuning Fuzzy-Sliding Mode Controller
pp. 637-641(5)
Authors: Shih, Ming-Chang; Pai, Kei-Ren

Formulation and Design of a Pendulum-Type Tuned Mass Damper System for Mitigation Vibration of a Ropeway Carrier
pp. 642-645(4)
Authors: Eem, Seung-Hyun; Jang, Dong-Doo; Jung, Hyung-Jo; Joo, Seok-Jun

An Experimental Investigation on Tribological Characteristics of Magnetorheological Fluids: Wear and Friction
pp. 646-650(5)
Authors: Song, Wan-Li; Choi, Seung-Bok

Using Carbon-Oriented Architecture to Build Green Cloud
pp. 651-653(3)
Authors: Chou, Li-Der; Huang, Deng-Yang

Prediction Simulation Process for Controlling in Maintenance Time in the Material Department
pp. 654-657(4)
Authors: Ali, Nasly Mohamed; Amani, Nima; Mohamed, Abdul Hakim

A Non-Metallic Material Formulation for Consumable Cartridge Cases
pp. 658-663(6)
Authors: Li, Wenbin; Zheng, Yu; Wang, Xiaoming; Li, Weibing

Efficiency Enhancement of Photovoltaic Modules Using Optical Grade Epoxy Resin
pp. 664-666(3)
Authors: Kuo, Hung-Fei; Tsai, Ming-Jong; Peng, Cheng-Yu; Ting, Hsien-Wei; Yang, Ming-Fu; Cheng, Chao-Hung

Rolling Element Bearing Fault Diagnosis Based on Symptom Parameter Wave of Acoustic Emission Signal
pp. 667-670(4)
Authors: Wang, Peng; Yuan, Hongfang; Wang, Huaqing; Cao, Xi; Wang, Xuewei

The Application of Arc Spraying to the Hard Facing of Wear-Resistant Multi-Layer Plate
pp. 671-674(4)
Authors: Chen, Hung-Shyong; Lee, Jeng-Nan; Huang, Chyouhwu; Kung, Huang-Kuang

Vibration-Based Structural Health Monitoring of Harbor Caisson Structure Using Auto-Regressive Model
pp. 675-679(5)
Authors: Lee, So-Young; Lee, So-Ra; Kim, Jeong-Tae

Sensitivity Analysis of Construction Processes Using Computer Simulation: A Case Study
pp. 680-684(5)
Authors: Nikakhtar, Amin; Hosseini, Alireza Abbasian; Wong, Kuan Yew

Investigation on Ultimate Strength and Curling Influence of Channel Four-Bolted Connections in Austenitic Stainless Steel
pp. 685-689(5)
Authors: Kim, Min Seong; Kim, Tae Soo; Shin, Sung Woo

A New Method of Errors Loaded Tooth Contact Analysis for Cycloid Bevel Gear
pp. 690-696(7)
Authors: Liu, Zhifeng; Zhang, Zhimin; Cai, Ligang; Yang, Wentong; Guo, Chunhua

Implementation of Lean Model for Carrying Out Value Stream Mapping in the Aerospace Engine Case Production
pp. 697-701(5)
Authors: Wang, Chen-hua; Kao, Jar-Her; Hsu, Ming-Tsai

Development of an Adequate Online Tool Wear Monitoring System in Turning Process Using Low Cost Sensor
pp. 702-706(5)
Authors: Ghani, Jaharah A.; Rizal, Muhammad; Nuawi, Mohd Zaki; Haron, Che Hassan Che

Stress Concentration Factor Estimation for Composite Plates with Cuts Using Guided Waves
pp. 707-711(5)
Authors: Yoon, Han-Sam; Woo, Jinho; Na, Won-Bae

Effect of Polyolefin Fibers and Ultrafine Slag Powders on the Mechanical Properties and Permeability of Cement-Based Composites
pp. 712-715(4)
Authors: Cai, Rui; Zhou, Xin-Gang; Cheng, An; Lin, Wei-Ting

Delamination Behavior of Interlaminar Short-Fiber Reinforced Composite Laminates Under Low-Velocity Impact
pp. 716-719(4)
Authors: Zhang, Fengpeng; Qiu, Zhaoguo; Liu, Jun; Zhan, Yu

The Application of Convergent Multi-Image Correlation in Determining Displacements in Beams
pp. 720-722(3)
Authors: Mustaffar, Mushairry; Zakaria, Rozana; Sa'ari, Radzuan; Haron, Zaiton; Shakri, Md. Rajuna Ahmad

Nonlinear Finite Element Analysis of Spar Platform
pp. 723-726(4)
Authors: Jameel, A. B. M. Mohammed; Islam, Saiful; Khaleel, M.; Jumaat, Mohd Zamin

Influence of CSA Expansive Admixture on Mechanical Properties of Strain-Hardening Cement-Based Composite (SHCC)
pp. 727-731(5)
Authors: Song, Young-Jae; Kim, Sung-Ho; Kim, June-Su; Yun, Hyun-Do; Tera, Mark; Shin, Mickey

A Binary Particle Swarm Optimization Approach to Optimize Assembly Sequence Planning
pp. 732-738(7)
Authors: Mukred, Jameel A. A.; Ibrahim, Zuwairie; Ibrahim, Ismail; Adam, Asrul; Wan, Khairunizam; Yusof, Zulkifli Md.; Mokhtar, N.

Research on the Factors of the Abnormal Wear of Shearer' Pick Holder
pp. 739-743(5)
Authors: Gao, Kui-Dong; Du, Chang-Long; Liu, Song-Yong; Fu, Lin

Analysis of Multi-Objective Planning Dynamic Equilibrium by K-Means of Proportional Distribution for Multi-Objective Particle Swarm Optimization
pp. 744-747(4)
Authors: Wang, Shen-Tsu; Yeh, Jen-Yin; Lin, Wen-Tsann; Li, Meng-Hua

Fracture Analysis of Interfacial Crack Between Two Composite Materials
pp. 748-753(6)
Author: Her, Shiuh-Chuan

Application of Block Method for Solving Nonlinear Two Point Boundary Value Problem
pp. 754-757(4)
Authors: Majid, Zanariah Abdul; Phang, Pei See; Suleiman, Mohamed

The Indoor Air Purification by New Photocatalytic Reactor
pp. 758-761(4)
Authors: Ma, Chih-Ming; Hong, Gui-Bing; Liou, Sih-Yu; Chang, Chang-Tang

Using Sugarcane Bagasse Ash as Partial Cement Replacement in Cement-Based Composites
pp. 762-767(6)
Authors: Lin, Wei-Ting; Ho, Hsin-Lung; Cheng, An; Huang, Ran; Huang, Chin-Cheng

A Prototype to Recognise the Drawing Elements in Construction Drawings Using Artificial Intelligence
pp. 768-769(2)
Authors: Muthuveerappan, Chitrakala; Muhammad, Abdul Hakim; Majid, Muhd Zaimi Abd; Minhans, Anil

Constructing an Outsourcing Model to Evaluate the Health Information System
pp. 770-773(4)
Authors: Huang, Yuan-Huei; Chang, Che-Wei

To Explore the Social Psychological Factors Influencing Outcomes of Health Websites
pp. 774-779(6)
Authors: Lee, Hsu-Hua; Yang, Tsau-Tang; Tsai, Chung-Hung

Study on Microstructure and Mechanical Properties of Welding Coarse Grain Heat-Affected Zone of High-Nb X80 Steels
pp. 780-783(4)
Authors: Chen, Xiao-Wei; Qiao, Gui-Ying; Wang, Xu; Xiao, Fu-Ren; Liao, Bo

Applying Reflectance Spectrum to Evaluate Water Content in Pachira Macrocarpa
pp. 784-786(3)
Authors: Peng, Yung-Liang; Chang, Yu-Sen

Characteristics and Release Behavior of Microencapsulated Cinnamon Oil by β-Cyclodextrin and Chitosan
pp. 787-790(4)
Authors: Xing, Yage; Xu, Qinglian; Zhang, Liang; Che, Zhenming; Li, Xihong; Rao, Yu; Bai, Yumin; Li, Ke

Voltage Collapse Detection of a Power System Based on Fault Identification Filtering Design
pp. 791-796(6)
Authors: Xu, Sendren Sheng-Dong; Liang, Yew-Wen; Liu, Hung-Yi

Structure Design and Modal Analysis of a Novel Plate Piezoelectric Motor
pp. 797-803(7)
Author: Mou, Shann-Chyi

Self-Energized MHD Pumps for Spacecraft Heat Transport
pp. 804-806(3)
Authors: Varatharajoo, Renuganth; Kahle, Ralph; Fasoulas, Stefanos

Recovery as Environment-Friendly Cement from Paper Pulp Waste Through Plasma Gasification Processes
pp. 807-810(4)
Author: Leu, Jai-Houng

The Bullwhip Effects in Industrialized Building System Supply Chains
pp. 811-812(2)
Authors: Taherkhani, R.; Nekooie, Mohammad Ali; Saleh, A. L.; Mohamad, Mohamad Ibrahim; Mansur, Shaiful Amri; Nourbakhsh, Mehdi; Zolfaghaarian, Samaneh

A Risk-Based Project Schedule Estimation Method to Improve Project Reliability
pp. 813-816(4)
Authors: Mansoorzadeh, Shiva; Yusof, Sha'ri Mohd; Zeynal, Hossein; Mansoorzadeh, Shahriar

A Study of Application of Axiomatic Design Theory on Effort-Saving Bicycle
pp. 817-819(3)
Authors: Weng, Feng-Tsai; Jenq, Shien-Ming

Inductively Coupled Plasma Mass Spectrometric Determination of Heavy Metals in Cultivated Soils and Zingiberaceous Plants
pp. 820-822(3)
Authors: Limmatvapirat, Chutima; Charoenteeraboon, Juree; Phaechamud, Thawatchai

The Causal Relationship Analysis on the Green Building System Assessment Dimensions
pp. 823-826(4)
Authors: Yan, Ah-Taur; Lai, Mei-Jung; Lin, Chiu-Yue

Decision Making Framework for Earthquake Resistant Building
pp. 827-830(4)
Authors: Adnan, Azlan; Zakaria, Rozana; Wah, Choo Kok; Saleh, Abd. Latif B.; Yahya, Khairulzan B.; Mustaffar, Mushairry; Shakri, Md. Rajuna Ahmad

Electron Beam Welding Varestraint Test of ALLVAC 718 Plus™ for Aviation Technology
pp. 831-832(2)
Authors: Uzgur, Sinem; Li, Huijun; Kushan, M. Cemal; Yan, Ma; Uzunonat, Yagiz; Diltemiz, Fehmi

Mixed Convection Boundary Layer with Internal Heat Generation in a Porous Medium Filled with a Nanofluid
pp. 833-835(3)
Authors: Yasin, Mohd Hafizi Mat; Arifin, Norihan Md; Nazar, Roslinda; Ismail, Fudziah; Pop, Ioan

The Correlation Between Shade Tolerance and Leaf Characteristics of Ten Urban Landscape Plants
pp. 836-840(5)
Authors: Wu, Chun-Wei; Chang, Yu-Sen; Lee, Ming-Chih; Sung, Fu-Hua; Huang, I-Ching; Hsu, Jung-Huei

Photocatalytic Degradation of Methylene Blue Dye in Aqueous Solutions by Photocatalytic Oxidation SiO₂–TiO₂
pp. 841-843(3)
Authors: Rodríguez, Angélica López; Gallardo, Pio Sifuentes; Rivera, Miguel Ángel Hernández; Trejo, Fabian Rivera; Flores, Laura Lorena Díaz; Romo, María Guadalupe Garnica

Engineering Properties of Controlled Low-Strength Materials Containing Waste Glass from Solar Panels
pp. 844-847(4)
Authors: Cheng, An; Lin, Kae-Long; Liao, Guo-Kai

Motion Control of a Nonlinear Pneumatic Actuating Table Using Self-Adaptation Fuzzy Controller
pp. 848-852(5)
Authors: Huang, Shiuh-Jer; Shieh, Shin-Wei

A Comparison Study on Different Toolpath Strategy in Pocket Milling of AISI 420 Stainless Steel
pp. 853-857(5)
Authors: Mokhtar, M. S. M.; Baharudin, B. T. H. T.; Ismail, N.; Leman, Z.

The Influence of Physical Properties on Total Friction Factor in Horizontal Dilute Pneumatic Conveying of Plastic Particles
pp. 858-862(5)
Authors: Wiwattanasirikul, Rungtawan; Sujumnongtokul, Purimpat

Control Chart Pattern Recognition of Manufacturing Process Using Wavelet Feature-Based Artificial Neural Networks
pp. 863-866(4)
Authors: Kim, Jun Seok; Park, Sang-Hoon; Park, Cheong-Sool; Ko, Hyo-Heon; Kim, Sung-Shick; Baek, Jun-Geol

Study of Extraction Process of Polyphenol from Old Leaves of Toona Sinensis
pp. 867-871(5)
Authors: Gong, Guo-li; Chen, Song; Zeng, Qiao; Li, Nan; Yang, Wenjuan

Steam Reforming of Liquid Wastes from Biomass Using Tubular Alumina Supported Pd Membrane Catalyst
pp. 872-876(5)
Authors: Nisamaneenate, Jurarat; Atong, Duangduen; Sricharoenchaikul, Viboon

Pervious Concrete Texture Analysis for Infiltration Rate Evaluation
pp. 877-878(2)
Authors: Firouzi, Morteza; Shamsudin, Supiah; Nekooie, Mohammad Ali; Rahis, Abdul Jamil Bin Abd.; Taherkhani, R.; Mohamad, Mohamad Ibrahim

Applying Spine-Type Prism to Improve Three Dimensional Dynamic Digital Image Techniques
pp. 879-883(5)
Authors: Sung, Wen-Pei; Shih, Ming-Hsiang