Skip to main content

ADVANCED SCIENCE LETTERS is an international peer-reviewed journal with a very wide-ranging coverage, consolidates research activities in all areas of (1) Physical Sciences, (2) Biological Sciences, (3) Mathematical Sciences, (4) Engineering, (5) Computer and Information Sciences, and (6) Geosciences to publish original short communications, full research papers and timely brief (mini) reviews with authors photo and biography encompassing the basic and applied research and current developments in educational aspects of these scientific areas.

Publisher: American Scientific Publishers

More about this publication?
Volume 4, Numbers 6-7, June/July 2011

Research Articles

Design and Performance Evaluation of Lightweight Dual Arm Robot Featuring Hollow Shaft Servo Assembly
pp. 1901-1907(7)
Authors: Park, Min-Kyu; Go, Seok-Jo; Lee, Young-Jin; Sung, Kum-Gil

Favourites:
ADD

Adaptive Resolution of Digital Pulse Width Modulation for Switching Power Converters
pp. 1908-1912(5)
Authors: Liu, Chao-Wei; Shen, Chih-Hsiung

Favourites:
ADD

Study on Simulation and Experiment of Dynamic Characteristics of the Linear Rolling Guide in Turn-Milling Centre
pp. 1913-1917(5)
Authors: Zhu, Lida; Zhu, Chunxia; Yu, Tianbiao; Wang, Wanshan

Favourites:
ADD

Study on the Metal Flowing of Lead Screw Cold Roll-Beating Forming
pp. 1918-1922(5)
Authors: Yan, Li; Mingshun, Yang; Qilong, Yuan; Jianming, Zheng

Favourites:
ADD

Evaluation on Corrosion Characteristics of Reinforced Concrete
pp. 1923-1927(5)
Authors: Moon, Kyung-Man; Lee, Myung-Hoon; Oh, Min-Seok; Kim, Yun-Hae

Favourites:
ADD

Deformation Analysis of Springback in L-Bending of Sheet Metal
pp. 1928-1932(5)
Authors: Chen, Fuh-Kuo; Ko, Shen-Fu

Favourites:
ADD
Favourites:
ADD

Measurement of Primary Dynamic Resistance of AC Resistance Spot Welding Using Power Factor and Piecewise Spline Interpolation
pp. 1939-1944(6)
Authors: Wang, Xianfeng; Meng, Guoxiang; Li, Yongbing; Xie, Wenhua; Feng, Zhengjin

Favourites:
ADD

Demerit-Double Exponentially Weighted Moving Average Control Chart with Fast Initial Response
pp. 1945-1950(6)
Authors: Kang, Hae Woon; Kang, Chang Wook; Baik, Jae Won

Favourites:
ADD

Enhance the Separation Performance of ICA via Clustering Evaluation and Its Applications
pp. 1951-1956(6)
Authors: Cheng, Wei; Zhang, Zhousuo; He, Zhengjia

Favourites:
ADD

Thermal Error Modeling and Compensation for CY-K500 Lathe
pp. 1957-1960(4)
Authors: Guo, Qianjian; Yang, Jianguo; Ren, Yongqiang

Favourites:
ADD

Quality Prediction for Post Reflow Based on Artificial Neural Networks in the Surface Mounted Process
pp. 1961-1965(5)
Authors: Li, Jingmin; Ni, Yanting; Tan, Jun; Yao, Jin

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Modeling and Power-Assist Control for Human Friendly Smart Door System
pp. 1976-1980(5)
Authors: Park, Min-Kyu; Lee, Byoungsoo; Sung, Kum-Gil; Go, Seok-Jo

Favourites:
ADD

Hygro-Thermo-Vapor Pressure Coupled Model on Premold QFN COMS Image Sensor
pp. 1981-1987(7)
Authors: Hsu, Hsiang-Chen; Chu, Li-Ming; Fu, Shen-Li

Favourites:
ADD

Synthetic Control of Strip Shape Defects for Universal Crown Control Mill Tandem Mill
pp. 1988-1992(5)
Authors: Wang, Donghong; Zhang, Xiaoming; Di, Hongshuang

Favourites:
ADD

Kinematic Analysis and Design of a Novel Stephenson-I Press System for Precision Cutting
pp. 1993-1998(6)
Authors: Hsieh, Wen-Hsiang; Tsai, Chia-Heng

Favourites:
ADD

A Robust Input Modification Approach for Flexible Joint Robot
pp. 1999-2003(5)
Authors: Park, Min-Kyu; Lee, Sang-Hun; Hur, Jong-Sung; Yim, Jong-Guk; Park, Jong-Hyeon; Sung, Kum-Gil

Favourites:
ADD

An Experimental Study on Distribution Characteristics of High Pressure Steam-Water Two-Phase Flow
pp. 2004-2008(5)
Authors: Zhu, Yuqin; Wang, Weishu; Bi, Qincheng

Favourites:
ADD

Study on Biaxial Linkage for Full-Closed AC Servo System with Modeling and Experiment
pp. 2009-2014(6)
Authors: Zhao, Gang; Zhang, Qing; Jiang, Junpeng

Favourites:
ADD

Design and Development: A Micro-Propulsion System with Propane Propellant for Small Satellites
pp. 2015-2021(7)
Authors: Tang, Hai-Bin; Zi, Zhen-Peng; Jin, Xiao-Wei; Jiang, Jian; Zou, Yu; Yan, Zhi-Yong

Favourites:
ADD

Test and Compilation of Load Spectrum of Hydraulic Cylinder for Earthmoving Machinery
pp. 2022-2026(5)
Authors: Wang, Jixin; Liang, Yunlong; Wang, Zhenyu; Wang, Naixiang; Yao, Mingyao; Sun, Yaofei

Favourites:
ADD

Development of a Novel Large Travel Compliant Buffer Mechanism
pp. 2027-2031(5)
Authors: Zhou, Qingkun; Zhang, Zhiyong; Fan, Dapeng

Favourites:
ADD

The Development of a Novel Fused Bi-Conical Taper Machine with an Electrical Resistance Micro-Heater
pp. 2032-2036(5)
Authors: Shuai, Cijun; Gao, Chengde; Nie, Yi; Peng, Shuping

Favourites:
ADD

Development of Sensory Fusion-Based Intelligent Fire Fighting Robot
pp. 2037-2042(6)
Authors: Ho, Chao-Ching; Chen, Ming-Chen; Tsai, Tsung-Ting

Favourites:
ADD

Effect of Diamond Oxidation Temperature on the Performance of a Diamond Disk in Chemical Mechanical Polishing
pp. 2043-2048(6)
Authors: Tsai, Ming-Yi; Yang, Wei-Zheng; Sung, James C.

Favourites:
ADD

Analysis of Mechanical Properties of Two Typical Kinds of Cutterheads of Shield Machine
pp. 2049-2053(5)
Authors: Su, Cuixia; Wang, Yanqun; Zhao, Haifeng; Su, Pengcheng; Qu, Chuanyong; Kang, Yilan; Huang, Tian; Cai, Zongxi; Wang, Lihui

Favourites:
ADD

Size Effect in Micro Multi-Point Sheet Forming
pp. 2054-2058(5)
Authors: Liu, Qiqian; Fu, Wenzhi; Lu, Cheng; Tieu, Kiet; Li, Mingzhe

Favourites:
ADD

Automation Tool Wear System Based on Validated Corner Detection and Taguchi's Method
pp. 2059-2065(7)
Authors: Liang, Yu-Teng; Chiou, Yih-Chih

Favourites:
ADD

Volumetric Error Prediction and Compensation of NC Machine Tool Based on Least Square Support Vector Machine
pp. 2066-2070(5)
Authors: He, Zhenya; Yao, Xinhua; Fu, Jianzhong; Chen, Zichen

Favourites:
ADD

Mechanism of Recast Removal During Laser Drilling Underwater
pp. 2071-2075(5)
Authors: Zhang, Hua; Xu, Jiawen; Zhao, Jianshe; Hua, Guoran

Favourites:
ADD

Chatter Stability of Low-Immersion Milling in Multi-Frequency with Helix Angle
pp. 2076-2081(6)
Authors: Lin, Zixiong; Huang, Xiang; Akhtar, Muhammad Masud

Favourites:
ADD

Development and Experimental Study of a New Electric-Heating Rapid Thermal Response Mold for RHCM Process
pp. 2082-2086(5)
Authors: Wang, Guilong; Zhao, Guoqun; Guan, Yanjin

Favourites:
ADD

Direct Torque Controlled Permanent Magnet Synchronous Motor Based on Active Disturbance Rejection Controller
pp. 2087-2091(5)
Authors: Wan, Jianru; Liu, Yingpei; Zhou, Hailiang; Bai, Runqing

Favourites:
ADD

A Computerised Wind Tunnel for Measuring Aerodynamic Properties of Forage Corn Stalks
pp. 2092-2098(7)
Authors: Lien, Cheng-Chang; Ting, Ching-Hua

Favourites:
ADD

Application of Fuzzy Control on Smart Car Servo Steering System
pp. 2099-2103(5)
Authors: Wang, Yongding; Nie, Lina

Favourites:
ADD

Simultaneous Berth and Quay Crane Allocation Problem in Container Terminal
pp. 2113-2118(6)
Authors: Lu, Zhiqiang; Han, Xiaole; Xi, Lifeng

Favourites:
ADD

Creative Design of Camouflage Supporting Device Based on TRIZ
pp. 2119-2126(8)
Authors: Wei, Wang; Jun, Hong; Li, Weimin; Fan, Haixiong

Favourites:
ADD

An Improved Ant Colony Optimization for Flexible Job Shop Scheduling Problems
pp. 2127-2131(5)
Authors: Yao, Baozhen; Yang, Chengyong; Hu, Juanjuan; Yao, Jinbao; Sun, Jian

Favourites:
ADD

Study on Modes and Properties of Oil Supply for Space Liquid Lubrication System
pp. 2137-2141(5)
Authors: Ji, Fenzhu; Zhao, Wenping; Liu, Shenwei

Favourites:
ADD

Development of Ship Hull Form Generation Method Using Analytic Function
pp. 2142-2146(5)
Authors: Chen, Xi; Wu, Xiaoguang; Zhang, Zhiguo; Feng, Dakui; Yue, Lei

Favourites:
ADD

Design for Reliability of Ultrasonic Bone Knife
pp. 2147-2151(5)
Authors: Chen, Ying; Kang, Rui; Zhou, Zhaoying

Favourites:
ADD

Selection of Simulation Software for Manufacturing System: Application of Analytical Hierarchy Approach in Multi Criteria Decision Making
pp. 2152-2158(7)
Authors: Zakria, Ghulam; Guan, Zailin; Shao, Xinyu; Riaz, Yasser; Hameed, Uzma

Favourites:
ADD

Force Closure Analysis for the Forging Gripping Mechanisms
pp. 2159-2163(5)
Authors: Li, Qunming; Qin, Qinghua; Deng, Hua

Favourites:
ADD

Internal Flow Characteristics of a Variable Pitch Axial Fan Under Abnormal Installation Angles of a Single Blade
pp. 2164-2169(6)
Authors: Ye, Xuemin; Li, Chunxi; Wang, Songling; Li, Jun

Favourites:
ADD

Application Research of Feeding Device Based on Virtual Reality Technology
pp. 2170-2173(4)
Authors: Wang, Xiaohua; Chai, Chengwen; Qi, Yuansheng

Favourites:
ADD

Improved Collaborative Particle Swarm Algorithm for Job Shop Scheduling Optimization
pp. 2180-2183(4)
Authors: Liu, Aijun; Yang, Yu; Xing, Qingsong; Yao, Hao; Zhang, Yudong; Zhou, Zhenyu

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Design of Suspension Tool of Great Steel Tube Stake Used in Installing of Wind Power on the Sea
pp. 2198-2202(5)
Authors: Zhang, Bo; Wang, Liquan; Wang, Zhuo; Chang, Dongyan; Feng, Chunhua

Favourites:
ADD

Dynamic Simulation and Analysis of Rolling Process of Integral Steel Spiral Finned Tube
pp. 2203-2206(4)
Authors: Hao, Bai; Yufeng, Gao; Wei, Wei; Daqiang, Cang; Jingpeng, She

Favourites:
ADD

Modeling the Complex Interaction Between Packaged Product and Vehicle
pp. 2207-2212(6)
Authors: Wang, Jun; Lu, Lixin; Wang, Zhiwei

Favourites:
ADD

Distributed Manufacturing Model Based on Customer Collaborative Innovation
pp. 2213-2217(5)
Authors: Liang, Xuedong; Yang, Yu; Deng, Guoying; Zhang, Renyin; Li, Haofei

Favourites:
ADD

Study on Effect of Piston System on Seismic Performance for Cylinder Gasholder
pp. 2218-2221(4)
Authors: Jia, Dongyun; Liu, Weiyun; Jiang, Dejin

Favourites:
ADD

Design Tension Controller of Unwinding System Based on BP Neural Network
pp. 2222-2226(5)
Authors: Li, Jian; Mei, Xuesong; Tao, Tao; Liu, Shanhui

Favourites:
ADD

Study on Parameter Identification of Excitation System Based on Chaos Genetic Algorithm
pp. 2227-2231(5)
Authors: Sun, Lixia; Ma, Kuijun; Xu, Hua; Lin, Chaoyong

Favourites:
ADD

Research on Production Configuration for Products Based on Semantic
pp. 2232-2235(4)
Authors: Ge, Jianghua; Liu, Lei; Ma, Guoxing

Favourites:
ADD

Monitoring and Diagnosis of Manufacturing Process Using Extreme Learning Machine
pp. 2236-2239(4)
Authors: Guo, Jun; Guo, Shunsheng; Yu, Xiaobing

Favourites:
ADD

Numerical Investigation of Entropy Generation and Optimization on a Centrifugal Fan
pp. 2240-2245(6)
Authors: Wang, Songling; Zhang, Lei; Zhang, Qian; Ye, Xuemin

Favourites:
ADD

Numerical Investigations Into the Effects of Oil Contamination and Surface Roughness on Wheel-Rail Adhesion
pp. 2246-2250(5)
Authors: Wu, Bing; Wen, Zefeng; Wang, Hengyu; Jin, Xuesong

Favourites:
ADD

Design and Experiments on a New Seawater Hydraulic Wirerope Cutter for Underwater Application
pp. 2251-2255(5)
Authors: He, Xiaofeng; Wen, Liang; Zhu, Bihai; Liu, Yinshui; Jiang, Zhengyi

Favourites:
ADD
Favourites:
ADD

Quantitative Definition of Deepness
pp. 2267-2271(5)
Authors: Liu, Bin; Liu, Quansheng; Zhou, Chuangbing

Favourites:
ADD

Design of Machine Learning-Based Smoke Surveillance
pp. 2272-2275(4)
Author: Ho, Chao-Ching

Favourites:
ADD

Numerical Simulation and Performance Study of Steam Ejector Using CFD
pp. 2276-2280(5)
Authors: Zhang, Qi; Huo, Jiepeng; Liu, Ruofei; Wang, Ruwu

Favourites:
ADD

An Investigation on Heat Transfer to Water Flowing in Vertical Upward Internally Ribbed Enhancement Tube at Supercritical Pressure
pp. 2281-2288(8)
Authors: Wang, Weishu; Bi, Qincheng; Gu, Hongfang; Chen, Tingkuan; Luo, Yushan

Favourites:
ADD

A Study on Random Yield and Uncertain Demand in Semiconductor Manufacturing
pp. 2295-2300(6)
Authors: Han, Guanghua; Dong, Ming

Favourites:
ADD

The Optimization of the Heat Removal on the LED Package
pp. 2301-2305(5)
Authors: Lin, David T. W.; Huang, Chung-Neng; Chang, Chong-Ching

Favourites:
ADD

Topology Optimization of Compliant Adaptive Leading Edge with Geometrically Nonlinearity
pp. 2306-2310(5)
Authors: Xin, Kou; Ge, Wenjie; Zhang, Yonghong

Favourites:
ADD

Monte-Carlo Simulation of Grain Growth in Vapor–Liquid–Solid Phase Sintered Materials
pp. 2311-2315(5)
Authors: Zhao, Yuhong; Hou, Hua; Zhao, Yuhui

Favourites:
ADD

Research on Closing Control of the Sluice Gate for Sudden Power Off of Large Pump
pp. 2316-2320(5)
Authors: Sun, Yumin; Yu, Guoping; Liu, Chao

Favourites:
ADD

A Large-Scale Device Collaboration Resource Selection Method with Multi-QoS Constraint Supported
pp. 2321-2325(5)
Authors: Rong, Xiaohui; Ma, Shilong; Deng, Pan; Chen, Feng

Favourites:
ADD

Strain Distribution and Strength of Round-Hole Fiber-Reinforced Structure of Insect Cuticle
pp. 2326-2330(5)
Authors: Chen, B.; Yuan, Q.; Wu, X.; Fan, J.

Favourites:
ADD

MTSDT: Multithreaded Software Dynamic Translator for Multi-Core System
pp. 2331-2336(6)
Authors: Guan, Haibing; Ma, Ruhui; Ni, Zhichen; Liang, Alei; Yang, Hongbo

Favourites:
ADD

Development of Measurement System on Straightness Error for Guide of Large CNC Machine Tool
pp. 2337-2341(5)
Authors: Yang, Xiumin; Li, Lixia; Liu, Guanghua; Wang, Sen; Zhang, Lei

Favourites:
ADD

A Cellular Genetic Algorithm Based Optimization of Clamping Forces for Fixture Design
pp. 2342-2346(5)
Authors: Lu, Yuming; Qin, Guohua; Li, Ming

Favourites:
ADD

Fast Solution of Rolling Based on Method of Forced Positive Definite Cholesky Decomposition
pp. 2347-2351(5)
Authors: Mei, Ruibin; Li, Changsheng; Liu, Xianghua; Song, Shuni; Bao, Li

Favourites:
ADD

Research on Assembly Quality Evaluation for Aircraft Product Based on Monte-Carlo Simulation
pp. 2352-2355(4)
Authors: Yao, Pengtao; Tan, Changbai; Zhou, Laishui

Favourites:
ADD

The Third Superharmonic Resonance of Diesel Shafting Subjected to Harmonic Moment Excitation
pp. 2356-2360(5)
Authors: Yang, Zhian; Cheng, Xintong; Li, Gaofeng

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Modeling the Large-Scale Device Control System Based on PI-Calculus
pp. 2374-2379(6)
Authors: Deng, Pan; Zhang, Jianwei; Rong, Xiaohui; Chen, Feng

Favourites:
ADD

Temperature Field of Disc Brake for Mine Hoist
pp. 2380-2384(5)
Authors: Peng, Yuxing; Zhu, Zhencai; Chen, Guoan; Bao, Jiusheng; Liu, Binbin; Li, Yilei

Favourites:
ADD

Experimental Research on the Lubricant Samples in a Reverse Cold Strip Rolling Mill
pp. 2385-2389(5)
Authors: Li, Changsheng; Li, Youyuan; Yu, Tao; Cui, Guangzhu

Favourites:
ADD

Research on Quality Test System of Safety Lock Based on PIC16F877A
pp. 2390-2395(6)
Authors: Zhang, Ke; Jiang, Xuechen; Sun, Jia; Wu, Yuhou

Favourites:
ADD
Favourites:
ADD

Theory and Application of the Double-Mass Anti-Vibration Isolation Vibrating Machine
pp. 2400-2404(5)
Authors: Liu, Jintao; Li, Xiaohao; Gao, Hongbo; Liu, Jie

Favourites:
ADD

Research on Schedule in Large-Scale Steel Structures' Construction Processing
pp. 2405-2408(4)
Authors: Sun, Jiusheng; Zhang, Qing; Liu, Ming

Favourites:
ADD

Improved Particle Swarm Algorithm for Production Scheduling Problems
pp. 2416-2419(4)
Authors: Tang, Jun; Zhao, Xiaojuan

Favourites:
ADD
Favourites:
ADD

Design, Analysis and Experiment of GMM-Based Nozzle-Flapper Servo Valve
pp. 2426-2430(5)
Authors: Wang, Chuanli; Li, Qipeng; Ding, Fan

Favourites:
ADD

Automatic Registration of 3D Point Clouds for Reverse Engineering
pp. 2431-2432(2)
Authors: Imbert, Mariano; Xiaoxing, Li

Favourites:
ADD

A Mechanical Model to Estimate the Disc Cutter Wear of Tunnel Boring Machines
pp. 2433-2439(7)
Authors: Wang, Lihui; Qu, Chuanyong; Kang, Yilan; Su, Cuixia; Wang, Yanqun; Cai, Zongxi

Favourites:
ADD

Value Engineering-Driven Lean Product Development
pp. 2440-2445(6)
Authors: Ni, Yanrong; Fan, Feiya; Zheng, Yu; Zhang, Yehe

Favourites:
ADD

Analysis and Compensation of Installation Errors for Circular Grating Angle Sensors
pp. 2446-2451(6)
Authors: Wang, Wen; Gao, Guanbin; Wu, Yaofeng; Chen, Zichen

Favourites:
ADD

Study on Improving Design of Gasoline Engine with Quality Function Deployment
pp. 2452-2456(5)
Authors: Han, Shanling; Yang, Lei; Yu, Lisha; Zhong, Peisi

Favourites:
ADD

Application of Particle Flow Simulation Method for Performance Test of Semi-Fixed Abrasive Tools
pp. 2457-2462(6)
Authors: Lv, Binghai; Yuan, Julong; Wang, Zhiwei; Deng, Qianfa

Favourites:
ADD

Optimum Design with Numerical Algorithm of Hyperboloidal Sliding Bearing Based on the Reliability Constraints
pp. 2463-2467(5)
Authors: Xu, Guojun; Zhang, Jinsheng; Wang, Jingkun; Wang, Zhi

Favourites:
ADD

Mathematical Modeling and Simulation of Fluid Velocity Field in Grinding Zone with Smooth Grinding Wheel
pp. 2468-2473(6)
Authors: Li, Changhe; Hou, Yali; Li, Jingyao; Han, Zhenlu; Ding, Yucheng

Favourites:
ADD

A Transmission Error Analysis Method Using Monte Carlo Simulation
pp. 2474-2477(4)
Authors: Mao, Jian; Cao, Yanlong; Yang, Jiangxin

Favourites:
ADD

Intelligent Configuration Method of Product Family for Mass Customization Based on Constraints and Cases
pp. 2478-2482(5)
Authors: Dan, Bin; Guo, Lifei; Wang, Jiangping; Feng, Tao

Favourites:
ADD

Study on Fan's Test Method for All Altitudes
pp. 2483-2487(5)
Authors: Xingjuan, Zhang; Xiangming, Kong; Feng, Gao; Chao, Wang

Favourites:
ADD

The Product Harmonious Design Evaluation Based on Hierarchy Grey Model
pp. 2488-2492(5)
Authors: Chen, Yazhe; Ren, Zhaohui; Wen, Bangchun

Favourites:
ADD

Some Metallurgical Observations of Adiabatic Shear Phenomenon During High Speed Machining AISI 1045 Hardened Steel
pp. 2493-2497(5)
Authors: Duan, Chunzheng; Yu, Haiyang; Li, Honghua; Wang, Minjie

Favourites:
ADD

Combination of Electromyography and Electroencephalography Measurements in Designing Repetitive Task in Industry
pp. 2498-2502(5)
Authors: Zadry, Hilma Raimona; Dawal, Siti Zawiah Md; Taha, Zahari

Favourites:
ADD

Design and Analysis of a Linear Disc-Type Electromagnetic Actuator
pp. 2503-2507(5)
Authors: Li, Qipeng; Ding, Fan; Chen, Xingda

Favourites:
ADD
Favourites:
ADD

Reducing Time and Cost of New Product Development in SMEs by E-Collaboration Through Project Management Approach
pp. 2513-2516(4)
Authors: Mohammadjafari, Marjan; Ahmed, Shamsuddin; Dawal, Siti Zawiah Md; Zayandehroodi, Hadi

Favourites:
ADD

Analysis for the Accuracy of Weighing System of Large Structure Object
pp. 2517-2521(5)
Authors: Zhang, Qing; Liu, Ming; Jiang, Junpeng

Favourites:
ADD

Theoretical Model to Analyze the Non-Repetitive Run-Out (NRRO) of Ball Bearings
pp. 2522-2527(6)
Authors: Yang, Zhaohui; Hong, Jun; Liu, Jian; Zhu, Yongsheng

Favourites:
ADD

Parallel Machines Scheduling with Sequence-Dependent Setup Times Constraints
pp. 2528-2531(4)
Authors: Hu, Dayong; Yao, Zhenqiang

Favourites:
ADD

Intelligent Method of Condition Diagnosis for Rotating Machinery Using Relative Ratio Symptom Parameter and Bayesian Network
pp. 2532-2537(6)
Authors: Zhu, Jingjing; Li, Zhongxing; Li, Ke; Xue, Hongtao; Chen, Peng

Favourites:
ADD

Ethernet Interface of High Speed Data Acquisition System Based on ARM-FPGA
pp. 2538-2542(5)
Authors: Yang, Guangyou; Li, Ming; Zhang, Daode; Xu, Wan

Favourites:
ADD

Multi-Objective Risk Analysis and Documents Assessment of Bridge Construction Based on AHP-GRAY
pp. 2543-2546(4)
Authors: Bao, Longsheng; Wang, Wenbiao; Liu, Ketong; Yu, Ling; Niu, Hong

Favourites:
ADD

Study on Key Technical Index for Construction of Base Course with Cement Fly-Ash-Flushed-by-Seawater Stabilized Crushed-Stones
pp. 2547-2550(4)
Authors: Bao, Longsheng; Yu, Ling; Wang, Wenbiao; Liu, Ketong; Zhu, Guangshan

Favourites:
ADD

Precipitates in 9–12% Cr Steel After Creep Rupture Test and Determination of Life Time Assessment Upon Larson-Miller Parameter
pp. 2555-2559(5)
Authors: Dong, Jiling; Shin, Keesam; Kim, Kuk-Cheol; Kim, Byung-Hoon

Favourites:
ADD

  • Access Key
  • Free content
  • Partial Free content
  • New content
  • Open access content
  • Partial Open access content
  • Subscribed content
  • Partial Subscribed content
  • Free trial content
Cookie Policy
X
Cookie Policy
Ingenta Connect website makes use of cookies so as to keep track of data that you have filled in. I am Happy with this Find out more