Skip to main content

ADVANCED SCIENCE LETTERS is an international peer-reviewed journal with a very wide-ranging coverage, consolidates research activities in all areas of (1) Physical Sciences, (2) Biological Sciences, (3) Mathematical Sciences, (4) Engineering, (5) Computer and Information Sciences, and (6) Geosciences to publish original short communications, full research papers and timely brief (mini) reviews with authors photo and biography encompassing the basic and applied research and current developments in educational aspects of these scientific areas.

Publisher: American Scientific Publishers

More about this publication?
Volume 4, Numbers 4-5, April-May 2011

Research Articles

Advanced Numerical Characterization of Mono-Crystalline Copper with Defects
pp. 1293-1301(9)
Authors: Zhan, H. F.; Gu, Y. T.; Yarlagadda, P. K. D. V.

Favourites:
ADD

Design, Fabrication and Testing of a Novel Micro-Bubble Oxygenator for Blood Oxygenation
pp. 1302-1307(6)
Authors: Cheng, Chiang-Ho; Chang, Chia-Lun

Favourites:
ADD

Hot Embossing with Two-Axis Micro-Positioning for Double-Sided Microstructures
pp. 1308-1311(4)
Authors: Wu, Cheng-Hsien; Chiu, Cheng-Hao

Favourites:
ADD

Analysis and Prediction of Workpiece Size Effects in Laser Surface Melting Process
pp. 1312-1317(6)
Authors: Yi, Peng; Liu, Yancong; Shi, Yongjun; Jang, Hao; Lun, Guande

Favourites:
ADD

Research on Tribological Performance of Cylinder Liner by Micro-Laser Surface Texturing
pp. 1318-1324(7)
Authors: Bifeng, Yin; Xiaodong, Li; Yonghong, Fu; Yun, Wang

Favourites:
ADD

The Simulation Investigation of Low-Velocity Characteristic for Micro-Electrochemical Machining Set-Up
pp. 1325-1330(6)
Authors: Li, Zhiyong; Niu, Zongwei; Li, Li; Ji, Hua

Favourites:
ADD
Favourites:
ADD

Mechanical Design and Affective Interaction of Bionic Robot Head
pp. 1337-1341(5)
Authors: Xie, Lun; Wang, Zhiliang; Xu, Jiaming

Favourites:
ADD

Sensitivity Analysis of Impedance Sensor Node for Structural Health Monitoring in Cable-Anchor System
pp. 1342-1347(6)
Authors: Kim, Jeong-Tae; Park, Jae-Hyung; Hong, Dong-Soo

Favourites:
ADD

Fatigue Life Span Analyze of Wind Turbine Blade
pp. 1348-1351(4)
Authors: Sun, Wenlei; Ding, Xikun; Ren, Guodong

Favourites:
ADD

Study of Composite Inhibitor on the Cobalt Leaching of the Cemented Carbide Tool
pp. 1352-1356(5)
Authors: Jia, Xiaoming; Zhang, Xiuling; Hou, Suoxia

Favourites:
ADD

Study on Phase Angle of Blood Pump Control System Driven by Large Gap Magnetic Field
pp. 1357-1360(4)
Authors: Jian-Ping, Tan; Yun-Long, Liu; Yan, Xu; Zhong-Yan, Zhu; Heng-Tuo, Liu

Favourites:
ADD

Hole Filling for Model Regeneration Through Moving Least Square
pp. 1361-1365(5)
Authors: Gao, Jian; Zeng, Xiangping; Chen, Xin; Zheng, Detao

Favourites:
ADD

Evaluation of the Characteristics of Heating Component Made by Composites
pp. 1366-1370(5)
Authors: Kim, Yun Hae; An, Seung Jun; Yoon, Sung Won; Yang, Dong Hun; Jo, Young Dae; Yoo, Chul Ho; Bae, Chang Won; Moon, Kyung Man

Favourites:
ADD
Favourites:
ADD

Dynamic Performance Improvement on Resonant Vibration Cylinder Pressure Transducer
pp. 1376-1380(5)
Authors: Zheng, Dezhi; Wu, Zongling; Yan, Qing; Fan, Shangchun

Favourites:
ADD

Single Edge Cutting Phenomenon and Instantaneous Uncut Chip Thickness Model of Micro-Ball-End Milling
pp. 1387-1393(7)
Authors: Han, Zhenyu; Zhang, Xiang; Sun, Yazhou; Fu, Hongya; Liang, Yingchun

Favourites:
ADD

Finite Element Analysis of a Mask-Less Electrochemical Texturing (MECT) Method on Metallic Surface
pp. 1394-1398(5)
Authors: Hao, Xiuqing; Wang, Li; Ding, Yucheng; Guo, Fangliang; Lu, Bingheng

Favourites:
ADD

Dynamic Simulation of the Two-Direction Micro-Electro-Mechanical System Inertial Switch
pp. 1399-1403(5)
Authors: Liu, Shuangjie; Hao, Yongping

Favourites:
ADD

Transportation Planning Process Business Processes Reengineering
pp. 1404-1409(6)
Authors: Sun, Jian; Li, Keping

Favourites:
ADD

Study on the Application of Rotary Desiccant Air-Conditioning System on Ships
pp. 1410-1415(6)
Authors: Chen, Wu; Yang, Guanghai

Favourites:
ADD

Microstructural Evolution of X20CrMoV12.1 Steel Upon Long-Term On-Site Exposure in Power Plants
pp. 1416-1423(8)
Authors: He, Yinsheng; Chang, Jungchel; Dong, Jiling; Shin, Keesam

Favourites:
ADD

Experiment Research on Cutter Arrangement of Helical Cutting Mechanism
pp. 1424-1429(6)
Authors: Liu, Songyong; Gao, Kuidong; Du, Changlong; Fu, Lin

Favourites:
ADD

Digital-Image-Correlation to the Evaluation of the Confidence Range of Cleavage Strength of Concrete
pp. 1430-1433(4)
Authors: Go, Cheer Germ; Peng, Sung-Shun; Shih, Ming-Hsiang; Lee, Tzen-Chin

Favourites:
ADD

Real-Time Surface Topography Measurement with Graphic Processing Unit
pp. 1434-1438(5)
Authors: Cao, Yanlong; Jin, Lu; Wang, Kaiwei; Yang, Jiangxin

Favourites:
ADD

Design and Performances of Dual Airflow Windows
pp. 1439-1443(5)
Authors: Sun, Bo; Zhao, Jianing; Wei, Jingshu

Favourites:
ADD

Microstructure Modeling and Further Effective Property Prediction for Plain Weave C/SiC Composites Considering Manufacturing Process
pp. 1444-1449(6)
Authors: Chen, Liuding; Tong, Xiaoyan; Yao, Leijiang; Li, Zishan; Lv, Yi

Favourites:
ADD

A Rock Crack Shear Fracture Criterion and the Experimental Study
pp. 1450-1454(5)
Authors: Li, Liyun; Mao, Hongchuan; Tian, Tian; Cao, Fuquan; Zhang, Caiwei; He, Shli

Favourites:
ADD

Material Design of Al/CFRP Hybrid Composites for the Hull of Autonomous Underwater Vehicle
pp. 1455-1458(4)
Authors: Kim, Yun-Hae; Moon, Kyung-Man; Jo, Young-Dae; Bae, Sung-Youl; Shin, Seok-Jin; Kim, Min-Jung; Kim, Joon-Young

Favourites:
ADD

Study of the Maximum Allowable Wall Temperature Difference of Thick Wall Cylindrical Shell Under Inner Pressure
pp. 1459-1465(7)
Authors: Su, Wenxian; Han, Chao; Sang, Zhifu; Widera, G. E. O.

Favourites:
ADD
Favourites:
ADD

Modeling the Spectral Absorptance of Heavily Doped Silicon Gratings
pp. 1473-1477(5)
Authors: Wang, Aihua; Cai, Jiuju; Chen, Yubin

Favourites:
ADD

Examination of the Material Removal Mechanisms During the Abrasive Jet Finishing of 45 Steel
pp. 1478-1484(7)
Authors: Hou, Yali; Li, Changhe; Han, Zhenlu; Li, Jingyao; Zhao, Huayang

Favourites:
ADD

Study on the Accuracy of a 6-DOF Flexure Hinge-Based Robot
pp. 1485-1490(6)
Authors: Ye, Xin; Zhang, Zhi-Jing; Wan, Bi-Le

Favourites:
ADD

An Improved Multi-Objective Particle Swarm Optimization
pp. 1491-1495(5)
Authors: Yang, Xixiang; Zhang, Weihua

Favourites:
ADD

A Study of the Dispersion of Machining Dimension Based on Vector
pp. 1496-1499(4)
Authors: Xia, Changgao; Lu, Liling; Zhu, Pei; Gao, Xiang

Favourites:
ADD

Research on the Nonlinear Mechanical Model of Cohesive Soil Based on Distinct Element Method
pp. 1500-1508(9)
Authors: Zhang, Rui; Zhou, Guifen; Chen, Guangming; Li, Jianqiao

Favourites:
ADD

Synthesis and Characterization of ZnSe and ZnSe/ZnS Quantum Dots for Potential Biomedical Application
pp. 1509-1513(5)
Authors: Wang, Xiang; Ma, Xuliang; Ling, Wenliang; Zheng, Yufeng

Favourites:
ADD

Optimization of Processing Parameters and Macrokinetics for Hydrodenitrogenation of Coal Tar
pp. 1514-1518(5)
Authors: Li, Dong; Li, Wenhong; Cui, Louwei; Yang, Xiaoyan; Zhang, Mengxin; Yan, Suihong

Favourites:
ADD

Water Distribution Network Operation Based on Microscopic System Optimization
pp. 1519-1524(6)
Authors: Shu, Shihu; Liu, Suiqing; Zhang, Dong

Favourites:
ADD

Influence of the Ratio of Inner to Outer Diameter on Penetrator with Enhanced Lateral Efficiency
pp. 1525-1528(4)
Authors: Du, Zhonghua; Song, Lili; Zhong, Kun; Wang, Feng

Favourites:
ADD

Image Quality Improvement in Atomic Force Microscopy Using a Novel Control Strategy
pp. 1529-1535(7)
Authors: Yan, Mu-Tian; Chen, Yil; Yen, Ping-Lang

Favourites:
ADD

Localization of a Plant Virus Combining In Situ Reverse Transcription-Polymerase Chain Reaction with a Light Microscope
pp. 1536-1540(5)
Authors: Hong-Yi, Yang; Xin, Zhuang; Li-Li, Li; Zhi-Wei, Qin

Favourites:
ADD

Fluorescent Determination of Trace Calcium in Water from High-Parameter Power Plant Based on a Porphyrin Derivative
pp. 1541-1545(5)
Authors: Zhou, Li-Jing; Cao, Zhong; Hu, Jing-Lin; Peng, Zhen; Zeng, Pu-Ni; Su, Gang; He, De-Liang

Favourites:
ADD

Optimal Design of High-Aspect-Ratio Micro/Nano Hierarchical Structures Mimicking Gecko Foot-Hairs
pp. 1546-1551(6)
Authors: Liu, Shiyuan; Zhang, Peng; Cheng, Xue; Malik, Rizwan; Tang, Zirong

Favourites:
ADD

Dynamic Characteristics of Viscoelastic Supported Air Foil Thrust Bearing Under Axial Whirl
pp. 1552-1555(4)
Authors: Zhou, Quan; Chen, Rugang; Hou, Yu

Favourites:
ADD

Measuring Micro/Meso Deformation Field of Geo-Materials with SEM and Digital Image Correlation Method
pp. 1556-1560(5)
Authors: Zuo, Jian-Ping; Zhao, Yang; Chai, Neng-Bin; Wang, Huai-Wen

Favourites:
ADD

A New Methodology to Validate the Cutting Temperature Theoretical Model in Super-Finish Hard Machining
pp. 1561-1565(5)
Authors: Ji, Xia; Kang, Zheng; Zhang, Xueping; Liang, Steven Y.

Favourites:
ADD

Exhaust-Gas Turbocharger Working Parameter Regression Model Based on Diesel Engine Rig-Test
pp. 1566-1569(4)
Authors: Luo, Qingguo; Gong, Zhengbo; Wang, Zhenbiao; Ge, Wei

Favourites:
ADD

The Study of Transmittance and Conductivity by Top ZnO Thickness in ZnO/Ag/ZnO Transparent Conducting Oxide Films
pp. 1570-1573(4)
Authors: Kim, Yun-Hae; Kim, Do-Wan; Murakami, Ri-Ichi; Zhang, Dongyan; Yoon, Sung-Won; Park, Se-Ho; Moon, Kyung-Man

Favourites:
ADD

A Study on the Mechanical Properties of Bamboo Fiber Reinforced Composites in Comparison with Matrices
pp. 1574-1577(4)
Authors: Kim, Yun-Hae; Yoon, Sung-Won; Yang, Dong-Hun; An, Seung-Jun; Kim, Do-Wan; Moon, Kyung-Man; Bae, Chang-Won

Favourites:
ADD

The Research of Virtual Assembly of Cotton Picker Roller Based on Virtual Reality
pp. 1583-1585(3)
Authors: Sun, Wenlei; Cao, Yushan; Sun, Wei

Favourites:
ADD

Design of Novel Hydraulic Flywheels for Vehicle Suspensions
pp. 1586-1590(5)
Authors: Li, Chuan; Jiang, Peng; Wang, Shilong; Wang, Yixian; Jiao, Zaojie

Favourites:
ADD

Optimization Design and Experiments on Sugarcane Leaf Shattering and Returning Machine
pp. 1591-1597(7)
Authors: Li, Ming; Lu, Jingming; Wei, Lijiao; Zhang, Jin; Fu, Xuegao; Wang, Jinli; Song, Deqing

Favourites:
ADD

GFRP-Concrete Hybrid Beams Under Flexural Loading: Experimental Investigation
pp. 1598-1601(4)
Authors: Zhao, Fei; Chen, Chaohe; Feng, Peng; Lou, Wenjuan

Favourites:
ADD
Favourites:
ADD

Optimal Parameter Design for Permanent-Magnet Synchronous Generators Used in the Small-Scale Wind Powers
pp. 1607-1610(4)
Authors: Huang, Chung-Neng; Lin, David T.W.; Chang, Chong-Ching

Favourites:
ADD
Favourites:
ADD

Fabrication of Micro/Nano Tools Inside a SEM
pp. 1617-1621(5)
Authors: Chang, Ming; Lin, Chung-Po

Favourites:
ADD

Numerical Simulation of Flow in a Single Rough Joint
pp. 1622-1626(5)
Authors: Wu, Yuexiu; Liu, Quangsheng; Liu, Xiaoyan; Liu, Bin

Favourites:
ADD

The Metal Magnetic Memory Detection of Rotating Bending Fatigue Damage for 45QT Steel
pp. 1627-1632(6)
Authors: Xu, Mingxiu; Wu, Dabo; Xu, Minqiang; Leng, Jiancheng; Li, Jianwei

Favourites:
ADD

A Study on the Mechanical Properties Comparison for the Composites Application of Basalt Fibers with GFRP
pp. 1633-1637(5)
Authors: Kim, Yun-Hae; Yang, Dong-Hun; Yoon, Sung-Won; Lee, Byung-Woo; Park, Se-Ho; Kim, Do-Wan; Bae, Chang-Won; Moon, Kyung-Man

Favourites:
ADD

Vibration Based Crack Identification of Running Rotor System
pp. 1638-1642(5)
Authors: Li, Bing; Dong, Hongbo; Xiang, Jiawei; Qi, Keyu; He, Zhengjia

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Experimental Study of a Ground Source Heat Pump System Using Vertical Concentric Tube Ground Heat Exchangers
pp. 1658-1662(5)
Authors: Chen, Jianping; Li, Zhongjian; Lian, Zhiwei; Tan, Lizheng

Favourites:
ADD

Model-Based Control of Spatial 6-DOF Hydraulic Parallel Robot Manipulator
pp. 1663-1666(4)
Authors: Yang, Chifu; Zheng, Shutao; Peter, O. Ogbobe; Han, Junwei

Favourites:
ADD

Fatigue Life Prediction of Rolling Element Bearings Based on Impact Energy Generated by Single Defect
pp. 1667-1672(6)
Authors: Xu, Dong; Chen, Xun; Xu, Yongcheng; Li, Xinglin; Yang, Yongmin

Favourites:
ADD

Natural Properties of a Micro Mill with Moving Boundary Conditions
pp. 1673-1677(5)
Authors: Huang, Bo-Wun; Yu, Pu-Ping; Lee, Jeng-Nan; Kuang, Jao-Hwa

Favourites:
ADD

An Operation Model of Fault Diagnosis Grid Based on Evolvement
pp. 1678-1682(5)
Authors: Chen, Guorong; Yan, Ping; Liu, Shuang

Favourites:
ADD

Micromechanical Strength of Composite Ceramic with Partially Debonding Interphase
pp. 1683-1686(4)
Authors: Ni, Xinhua; Li, Baofeng; Zheng, Jian; Liu, Xiequan; Zhong, Guohui; Zhao, Lei

Favourites:
ADD

A Decidable Formal Analysis of Context-Specific Behavioral Equivalence for Web Services
pp. 1687-1694(8)
Authors: Kuang, Li; Mao, Yuxin; Xia, Yingjie

Favourites:
ADD

An Approach to Detect Damage Quantitatively for Planetary Gear Sets Based on Physical Models
pp. 1695-1701(7)
Authors: Cheng, Zhe; Hu, Niaoqing; Gao, Jingwei

Favourites:
ADD

Parametric Density Concept for Guided Wave Attenuation Calculation in Fluid-Filled and Buried Steel Pipes
pp. 1702-1705(4)
Authors: Lee, Juwon; Na, Won-Bae; Shin, Sung Woo; Kim, Dae-Jin

Favourites:
ADD

Operational Risk Evaluation of a Process Plant Based on Safety Review
pp. 1706-1710(5)
Authors: Hsu, Ming-Tsai; Wang, Chen-Hua

Favourites:
ADD

Hybrid Analytic-FEA Method for Calculating Hygro-Thermal Deformation of Concrete
pp. 1711-1716(6)
Authors: Chen, Depeng; Liu, Chunlin; Qian, Chunxiang; Miao, Changwen; Liu, Jiaping

Favourites:
ADD

Simulation and Implementation of AGC on Hille 100 Experimental Rolling Mill
pp. 1717-1723(7)
Authors: He, Xiaofeng; Jiang, Zhengyi; Cook, Christopher; Liu, Yinshui

Favourites:
ADD

An Evaluation Model of Machining Process for Green Manufacturing
pp. 1724-1728(5)
Authors: Jiang, Zhigang; Zhang, Hua; Yan, Wei; Zhou, Min

Favourites:
ADD
Favourites:
ADD

A Study on the Application of Reinforced Waffle Soil to Improve Pavement Structures
pp. 1735-1739(5)
Authors: Hsu, Hui-Mi; Chen, Hao-Hsien; Chao, Sao-Jeng; An, Cheng

Favourites:
ADD

Hydrogen Diffusion in Molten Aluminum A206 Casting Alloy
pp. 1740-1744(5)
Authors: Zeng, Jianmin; Li, Dezhi; Xu, Zhengbin; Wang, Youbin

Favourites:
ADD

Performance Analyses for the Design of a Machine Tool Cooler System Retrofitted with Eco-Friendly Refrigerants
pp. 1745-1751(7)
Authors: Wang, Fujen; Tsai, Kueii; Chiang, Weiming; Lee, Haochuan

Favourites:
ADD

Effects of Simulated Space Thermal Cycling on LF6 Aluminum Alloy Welded Joint
pp. 1752-1756(5)
Authors: Mi, Guofa; Zhao, Dawei; Wang, Haiyan; Li, Changyu; Wang, Kuangfei; Niu, Jitai

Favourites:
ADD
Favourites:
ADD

Size Dependent Fracture Enhancement of Transformation Composite Ceramic with Partially Debonding Interphase
pp. 1767-1770(4)
Authors: Ni, Xinhua; Liu, Xiequan; Han, Baohong; Zhang, Shuqin; Cheng, Zhaogang

Favourites:
ADD

Disturbance-Observer-Based Robust Flight Control for Hypersonic Vehicles Using Neural Networks
pp. 1771-1775(5)
Authors: Chen, Mou; Jiang, Chang-Sheng; Wu, Qing-Xian

Favourites:
ADD

Identification of Spindle Runout Parameters in Micro-Ball-End Milling
pp. 1776-1781(6)
Authors: Zhang, Xiang; Han, Zhenyu; Fu, Hongya; Sun, Yazhou; Liang, Yingchun

Favourites:
ADD

Nanoindentation Approach for Investigation of Cement Phase
pp. 1782-1786(5)
Authors: Liang, Kang; Yao, Wu; Song, Shuangxi; He, Li

Favourites:
ADD
Favourites:
ADD

Multi-Parameter Static Bifurcation Analysis of Wind Power System Based on Dynamic Model
pp. 1792-1795(4)
Authors: Ma, Youjie; Wen, Hulong; Zhou, Xuesong; Li, Ji; Yang, Haishan; Zhou, Xuanzheng

Favourites:
ADD

Nonlinear Behaviors and Bifurcation of Flexible Rotor System with Axial-Grooved Self-Acting Gas Bearing Support
pp. 1796-1802(7)
Authors: Wang, Weimin; Lu, Yanjun; Cao, Zhijun; Zhang, Yongfang; Feng, Lei; Yu, Lie

Favourites:
ADD

Analysis on Wafer Tilt Contributions to Contact Mechanics in Chemical Mechanical Polishing Process
pp. 1803-1807(5)
Authors: Zhang, Chao-Hui; Liu, Si-Si; Ming, Er-Yang

Favourites:
ADD
Favourites:
ADD

Parameters Optimization of S-Shaped Rail for Crashworthiness Analysis
pp. 1814-1818(5)
Authors: Wu, Hequan; Zhang, Xin; Wu, Changqi

Favourites:
ADD

The Effects of Nano-Tube's Properties on the Mechanical Behaviors of Nano-Reinforced Composites
pp. 1819-1823(5)
Authors: Luo, Dong-Mei; Yang, Hong; Yu, Dong; Zhu, Wen-Liang

Favourites:
ADD

Effects of Rolling Schedules on Mechanical Properties and Microstructure in an Ultrafine Grain Steel
pp. 1824-1827(4)
Authors: Zhou, Min; Du, Linxiu; Zhou, Zhongshang; Liu, Xianghua; Guan, Hao

Favourites:
ADD

Research on Bacteriostasis for Nanoscale Ag/TiO2-HVAC System
pp. 1828-1832(5)
Authors: Zhao, Yu-Kuang; Tsai, Tzai-Tang; Wang, Hsien-Jung; Chiu, Hui-Tzu

Favourites:
ADD

A New Approach to Group Decision-Making for Cooperative Monitoring and Diagnosis of Manufacturing Equipment
pp. 1833-1837(5)
Authors: Lu, Baochun; Yang, Guojun; Zhang, Wei; Zhang, Dengfeng

Favourites:
ADD

Solvent Swelling Behavior of Fushun Pyrolysis and Demineralized Oil Shale
pp. 1838-1841(4)
Authors: Liu, Yanhui; Xue, Xiangxin; He, Yang

Favourites:
ADD

Study and Test of Carbonaceous Heat Agent
pp. 1847-1850(4)
Authors: Zhang, Jian; Chen, Dengfu

Favourites:
ADD

Chance Programming Models for Time-Energy Trade-Off Problem of Product Disassembly Process with Multiple Stochastic Variables
pp. 1851-1854(4)
Authors: Tian, Guangdong; Liu, Yumei; Zhang, Hongwei; Chu, Jiangwei; Xu, Guan

Favourites:
ADD

Knowledge Modeling and Semantic Retrieval of Product Data Based on Fuzzy Ontology and SPARQL
pp. 1855-1859(5)
Authors: Zhai, Jun; Yuan, Changfeng; Chen, Yan; Li, Jianfeng

Favourites:
ADD

Applying Expert Diagnosis Model to Collaborative Design Systems
pp. 1860-1861(2)
Authors: Wu, Cheng-Ru; Chang, Che-Wei; Chen, Chiu-Chin

Favourites:
ADD

Kinetics of Surface Nanocrystallization for Hadfield Steel in Shot Peening
pp. 1862-1866(5)
Authors: Sun, Kun; Fang, Liang; Yan, Weilin; Li, Bo; Wang, Yiqing

Favourites:
ADD

Design and Simulation of a New Traction-Brake Hydraulic Torque Converter
pp. 1871-1874(4)
Authors: Li, Hua; Miao, Zhong; Han, Jiahua; Yao, Jin

Favourites:
ADD

The Development and Application of One Step Moment Distribution Method
pp. 1875-1879(5)
Authors: He, Jianping; Chen, Weizhong; Yao, Yunlong

Favourites:
ADD

Evaluating Collaborative Technology of Software Contractor Performance
pp. 1880-1881(2)
Authors: Chang, Che-Wei; Wu, Cheng-Ru; Liao, Chia-Chun

Favourites:
ADD

Developing a Model for Steady Outsourcing Projects in Evaluating the Health Medical Information Systems
pp. 1882-1885(4)
Authors: Huang, Yuan-Huei; Chang, Che-Wei; Ting, Chun-Jen

Favourites:
ADD

Fiber Model Based on Timoshenko Beam Theory and Its Application
pp. 1886-1888(3)
Authors: Zhang, Lingxin; Xu, Guolin; Bai, Yashuang

Favourites:
ADD

Predicting Propagation Lifetime of Embedded Cracks Using Industrial Computed Tomography
pp. 1889-1894(6)
Authors: Li, Linsheng; Zeng, Li; Wan, Taoyu; Liu, Baodong

Favourites:
ADD

Stress Analysis of the Embedded Defect in the Side Frame of Railway Freight Car
pp. 1895-1900(6)
Authors: Li, Linsheng; Zeng, Li; Liu, Baodong; Xiang, Caibing

Favourites:
ADD

  • Access Key
  • Free content
  • Partial Free content
  • New content
  • Open access content
  • Partial Open access content
  • Subscribed content
  • Partial Subscribed content
  • Free trial content
Cookie Policy
X
Cookie Policy
Ingenta Connect website makes use of cookies so as to keep track of data that you have filled in. I am Happy with this Find out more