Advanced Science Letters

Mechanical Behavior of Titanium Carbide Particle-Reinforced Titanium Matrix Composite Under Quasi-Static and Dynamic Tension
pp. 635-640(6)
Authors: Song, Weidong; Ning, Jianguo; Wang, Jing; Mao, Xiaonan

Design and Performance Testing of a Micro Flexible Caudal Fin-Like Propulsor
pp. 641-645(5)
Authors: Li, Jian; Wang, Zhenlong; Wang, Yangwei; Hang, Guanrong

Study on Design and Test of Flexible Uniform Pressure Loading Device
pp. 646-650(5)
Authors: Wang, Hanpeng; Li, Shucai; Yue, Xiaolei; Wang, Qi

Compressive Tests for Rubberized Concrete Under Different Loading Rates
pp. 651-655(5)
Authors: Chen, Guixuan; Liu, Feng

Pushover Analysis of a 53 m High Wind Turbine Tower
pp. 656-662(7)
Authors: Guo, Lanhui; Uang, Chia-Ming; Elgamal, Ahmed; Prowell, Ian; Zhang, Sumei

Experimental and Theoretical Study on Structural Behavior of Fabric Reinforced Concrete Sandwich Panels
pp. 663-668(6)
Authors: Chen, Zhihua; Zhou, Ting; Liu, Hongbo; Chen, Yonghao; Wang, Xiaodun

Warpage Optimization of Polystyrene in Selective Laser Sintering Using Neural Network and Genetic Algorithm
pp. 669-674(6)
Authors: Wang, Chuanyang; Dong, Qu; Shen, Xuanxuan

Study on the Piezoelectric and Damping Properties of NBR/PF/PMN/CB Composites
pp. 675-680(6)
Authors: Li, Jian; Du, Ming

Investigation of Structural Response Reduction Performance of Smart Passive System Using Real-Time Hybrid Simulation
pp. 681-685(5)
Authors: Jang, Dong-Doo; Jung, Hyung-Jo; Lee, Heon-Jae

Numerical Simulation and Experimental Analysis of Riveting with Pipe Rivet
pp. 686-690(5)
Authors: Huang, Zhichao; Fan, Kuaichu; Yao, Qiuhua; Lai, Jiamei

Anti-Seismic Capability and Property Optimization of Foam Concrete in Tunnel as Isolation Layer
pp. 691-695(5)
Authors: Jiang, Quan; Zhang, Jiaxin

Real-Time Health Monitoring of Pipeline Structures Using Piezoelectric Guided Wave Propagation
pp. 696-701(6)
Authors: Kim, Ju-Won; Lee, Changgil; Park, Seunghee

Research on the Surface Quality in Two-Dimensional Ultrasonic Vibration Grinding Based on Fractal Theory
pp. 702-707(6)
Authors: Zhao, Bo; Zhao, Mingli; Wang, Yuqing

Identification of Material Parameters for High Strength Steel Under Impact Loading
pp. 708-714(7)
Authors: Zhang, Yong; Sun, Guangyong; Li, Guangyao; Rungsiyakull, Chaiy; Li, Qing

Friction and Wear Properties of Si₃N₄ and SiC Used for Water-Lubricated Sliding Bearings
pp. 715-719(5)
Authors: Liu, Feng; Lin, Bin; Zhang, Xiaofeng

Stress–Strain Relation Model of Core RPC and Its Application to RPC-Filled Steel Tubes
pp. 720-725(6)
Authors: Zeng, Jianxian; Jiang, Shao-Fei; Wu, Yanhai

Numerical Simulation on Hot Forming of B Pillar
pp. 726-730(5)
Authors: Zhang, Zhiqiang; Li, Xiangji; Pan, Libo; Wei, Xing

The Dynamic Mechanical Behavior of Sandwich Beams with Aluminum Honeycomb Cores
pp. 731-735(5)
Authors: Jing, Lin; Yan, Qingrong; Wang, Zhihua; Zhao, Longmao

Coherent Scattering Effects from the Periodic Surface Generated in the Ultraprecision Diamond Turning
pp. 736-739(4)
Authors: Tsai, Hsi-Hsun; Feng, Hui-Ping

Synthesis of Polyurethane Prepolymers and Damping Property of Polyurethane/Epoxy Composites
pp. 740-744(5)
Authors: Shi, Minxian; Zheng, Juanli; Huang, Zhixiong; Qin, Yan

Computational Flow Dynamics of the Refrigerant Distribution in a Spray Type Evaporator
pp. 745-749(5)
Authors: Chien, Liang-Han; Wang, Shih-Ming; Liao, Wun-Rong

Structure and Performance of Electroless Nickel Plating Combined with Micro-Arc Oxidation on Pure Titanium
pp. 750-754(5)
Authors: Zhongcai, Shao; Haitao, Jiang; Shouqiang, Wei; Liping, Wu

Development of Seismic Isolation Techniques for Elevated Platform of Hi-Tech Factory Building
pp. 759-763(5)
Authors: Sung, Wen-Pei; Shih, Ming-Hsiang; Chen, Chang-Liang

Abnormal Zone Identification of Roof Looseness in Excavation Roadway Based on Microseismic Technology
pp. 764-768(5)
Authors: Liu, Chao; Tang, Chunan; Ma, Tianhui

Tb-Based Bulk Metallic Glass with High Elastic Modulus
pp. 769-773(5)
Authors: Wang, Yongtian; Liu, Zongde

Effect of Ultra Violet Process and Annealing on Reliability in Low Temperature Silicon Wafer Direct Bonding
pp. 774-780(7)
Authors: Malik, Rizwan; Shi, Tielin; Tang, Zirong; Liu, Shiyuan

Research on Aseismic Measures and Materials for Underground Engineering
pp. 781-785(5)
Authors: Chen, Weizhong; Huang, Sheng; Yang, Jianping; Tan, Xianjun

Study on the Penetration of Open-Cell and Closed-Cell Aluminum Foams by Flat-Ended Projectiles
pp. 786-790(5)
Authors: Yan, Xiaopeng; Zhang, Nianmei; Zhao, Yonggang; Liang, Weimin; Yang, Guitong

Fatigue Properties of Al₂O₃-ZrO₂ Nano-Composite Ceramics Under Ultrasonic Vibration
pp. 791-795(5)
Authors: Ma, Hui; Zhao, Bo; Wang, Xuyang

Green's Function Solution of Semi-Cylindrical Gap with Multiple Shallow-Buried Cavities
pp. 796-799(4)
Authors: Li, Hongliang; Zhang, Rui

The Theoretical and Experimental Research on a New Kind of Sewage Heat-Exchanger of Corrugated Pipe
pp. 800-804(5)
Authors: Li, Bai; Yan, Shi

Geometry Optimization of Magneto-Rheological Damper for Vehicle Suspension via Finite Element Method
pp. 805-809(5)
Authors: Sung, Kum-Gil; Choi, Seung-Bok; Park, Min-Kyu

Optimization on the Fiber Laser Micro-Cutting of Thin Stainless Steel Sheet by Artificial Neural Networks
pp. 810-813(4)
Authors: Niu, Ben; Chen, Jimin; Liu, Furong

Researches on Differential Model of Magnetrheological Damper in Dependence on Loading Rate
pp. 814-818(5)
Authors: Liu, Rong; Wang, Linxiang

Measurement and Estimation of the Cutting Temperature During Lathe-Turning of Zr-Based Bulk Metallic Glass
pp. 819-823(5)
Authors: Zhang, Weiguo; Ma, Mingzhen; Song, Aijun; Liang, Shunxing; Zhang, Xinyu; Hao, Qiuhong; Liu, Riping

Finite Element Simulation of Temperature Field in Plunge Milling Ti-6A1-4V at Cooling Condition
pp. 824-829(6)
Authors: Qin, Xuda; Jia, Hao; Ji, Xiaolai; Sun, Xiaotai; Wang, Qi

The Study of Rheology Characteristics of Grease in Micro-Pores of Tribological Cellular Materials
pp. 830-834(5)
Authors: Han, Zhihong; Liu, Zuomin

Multi-Objective Design Optimization of Coronary Stent Mechanical Properties
pp. 835-838(4)
Authors: Shen, Xiang; Ni, Zhonghua

Temperature Field Analysis of Non-Conductive Ceramics Process Based on Single Capacitance Discharge
pp. 839-843(5)
Authors: Shen, Rong; Liu, Yonghong; Zhang, Haifeng; Ji, Renjie

Influences of Nanoscale Serpentine Content on Self-Repairing Performance of Metal Pairs Under High Temperature
pp. 844-850(7)
Authors: Qi, Xiaowen; Jia, Zhining; Yang, Yulin

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool
pp. 851-858(8)
Authors: Zhang, Zixian; Ren, Bingyin; Feng, Yixiong; Hagiwara, Ichiro

Analysis the Corrosion Protective Efficiency of Galvanizing Rebar in Ground Granulated Blast Furnace Slag Concrete
pp. 859-868(10)
Authors: Chao, Sao-Jeng; Cheng, An

Study on Rock Fracture Failure Criterion Based on Energy Principles
pp. 869-874(6)
Authors: Gao, Wei; Wang, Lei; He, Songcheng

Influences of Polyester Plasticizers on the Properties of Oil Resistance Flexible Poly(vinyl chloride) and Powder Nitrile Butadiene Rubber Blends
pp. 875-879(5)
Authors: An, Ying; Ding, Yumei; Tan, Jing; Yang, Weimin

Use of Nanoindentation and Nanoscratching Tests to Characterize the Ductile-Brittle Transition
pp. 880-884(5)
Authors: Sun, Yuli; Zuo, Dunwen; Zhu, Yongwei; Li, Jun

Design and Control of Electrorheological Suspension Using Fuzzy Moving Sliding Mode Control
pp. 885-890(6)
Authors: Sung, Kum-Gil; Choi, Seung-Bok; Park, Min-Kyu

Laser Processing Technique of Stainless Steel Surface Nanotexture
pp. 891-894(4)
Authors: Yang, Haifeng; Wang, Yanqing; Fang, Liang; Ge, Shirong

Study on Property of Reversible Thermochromatic Anti-Counterfeiting Paper
pp. 895-899(5)
Authors: Long, Zhu; Dong, Cuihua; Zhang, Hui

The Particle Swarm Group Search Optimization Algorithm and Its Application on Structural Design
pp. 900-905(6)
Authors: Zeng, Shikai; Li, Lijuan

Study on the Interfacial Shear Stress of Carbon Fibre Reinforced Polymer to Steel Bonded Joints
pp. 906-910(5)
Authors: Deng, Jun; Li, Jian; Guo, Pan

Experimental Study on Tensile Strength of Steel-Polypropylene Hybrid Fiber Reinforced Concrete
pp. 911-916(6)
Authors: Xu, Lihua; Xu, Haoran; Chi, Yin; Zhang, Yuanyuan

Size Effect on Fracture Parameters of Concrete
pp. 917-921(5)
Authors: Wei, Demin; Zhang, Heng

Experimental Investigation on the Anchorage Performance of Clamping Anchors for Carbon Fiber Reinforced Polymer Rods
pp. 922-926(5)
Authors: Ye, Yong; Guo, Zixiong

Research on Distribution of the Trace of Boron in Hot-Rolling and Annealing Low Carbon Steels in a Compact Strip Production Line
pp. 927-932(6)
Authors: Hao, Yu; Xiaoyan, Wang

Preparation Process of Microcapsule Containing Phase Change Material for Thermal-Energy Storage
pp. 933-937(5)
Authors: Yang, Zhao; Wei, Zhang; Leping, Liao; Wujun, Li; Yi, Xin

Effect of Deformation Temperature on the Microstructure of Boron Steel 22MnB5
pp. 938-942(5)
Authors: Min, Junying; Lin, Jianping; Li, Jiayue

Simulation of Non-Gaussian Random Field for Boundary In-Plane Imperfection
pp. 943-947(5)
Authors: Li, Chunxiang; Li, Jinhua

Shrinkage Properties of Ultra-High Performance Concrete (UHPC)
pp. 948-952(5)
Authors: Koh, Kyungtaek; Ryu, Gumsung; Kang, Sutae; Park, Jungjun; Kim, Sungwook

Sliding Mode Control Design of Active Vehicle Suspension Systems with Two-Time Scale Submodels
pp. 953-957(5)
Authors: Qiao, Feng; Sun, Shuang; Sun, Jia; Zhu, Quanming

Experimental Study of Size Effect on Static/Dynamic Flexural-Tensile Strength of Three-Graded Concrete
pp. 958-962(5)
Authors: Zhou, Jikai; Chen, Xudong; Wu, Shengxing; Chen, Houqun

Microstructure and Wear Resistance of Fe-Based Multi-Layers Amorphous Composite Coatings by Tungsten Inert Gas Cladding
pp. 963-967(5)
Authors: Hu, Weiqiang; Liu, Zongde; Wang, Yongtian; Zhang, Hualei

The Microstructure and Tensile Properties of Ti-45Al-5Nb-0.03Y After Hot Extrusion
pp. 968-972(5)
Authors: Zhang, Hao; Xu, Wenchen; Shan, Debin; Li, Xinan

Experiment Research on Sound Absorption Performance of Metal Rubber Materials
pp. 973-976(4)
Authors: Dong, Xiuping; Huang, Mingji; Feng, Tao; Ji, Xuefei

Size Effect of Fracture Toughness of High Strength Fiber Concrete
pp. 977-980(4)
Authors: Zhou, Hao; Huang, Peiyan; Zheng, Shunchao; Hu, Ruolin

Microstructure and Property of Semi-Solid Thixoforging Hub Part of ZL201 Alloy
pp. 981-985(5)
Authors: Li, Xiaofeng; Wang, Ping

Impact Action Between Concrete Blocks in Collapse Analysis of Reinforced Concrete Structures
pp. 986-995(10)
Authors: Hou, Jian; Yang, Zheng; Zhou, Mi

Study on NiCrAl Coating Alloyed on In718 Ni-Base Alloy by High-Energy Micro-Arc Alloying Processing
pp. 996-1001(6)
Authors: Chen, Changjun; Zhang, Min; Zhang, Shichang; Chang, Qingming; Chen, Xia

Research on a New Process: Warm Tension-Rotation Bending of AZ31 Extruded Profile
pp. 1002-1006(5)
Authors: Xiao, Han; Liu, Jinsong; Zhang, Shihong; Zhang, Xingguo; Wang, Qi

Microstructure Characteristics and Corrosion Resistance of In-Situ Composite Steel Processed by Severe Cold-Rolling
pp. 1007-1011(5)
Authors: Zhao, Jun; Wang, Zhi; Zhang, Han; Zhai, Hongyan; Wang, Min; Chen, Jiuchuan; Gao, Yuwei

Investigation on Microstructure and Properties of WCu Alloy Fabricated by Infiltrating CuLa Master Alloy Into W Skeleton
pp. 1012-1016(5)
Authors: Wang, Xianhui; Liang, Shuhua; Wang, Bo; Zou, Juntao

Deformability of Cu-W Composites with Addition of Cr, Ti Activated Elements
pp. 1017-1021(5)
Authors: Zou, Juntao; Yang, Xiaohong; Liu, Gaofeng; Liang, Shuhua

Microstructure and Properties of AZ61 Magnesium Alloy Joint by Electron Beam Welding
pp. 1022-1026(5)
Authors: Ye, Hong; Yan, Zhonglin; Yang, Hanli

Influence of Fire Times on the Microstructure and Mechanical Properties of Forgings with Complex Shape
pp. 1027-1031(5)
Authors: Zhang, Yanqiu; Xu, Fuchang; Jiang, Shuyong; Shan, Debin

Flexural Performance of Lightly Reinforced Concrete Beams with Ultra-High Strength Fiber-Reinforced Concrete (UHSFRC)
pp. 1032-1038(7)
Authors: Kang, Su-Tae; Ryu, Gum-Sung; Park, Jung-Jun; Koh, Kyung-Taek; Kim, Sung-Wook

Ultrasonic Detection Research for the Defect Near the Surface of Steel Plate
pp. 1039-1041(3)
Authors: Chang, M. K.; Chi, F. C.; Shu, C. M.

Theoretical and Experimental Research on Magnetic Flux Stress Testing Method for Steel Structure
pp. 1042-1046(5)
Authors: Xiong, Ergang; Wang, Sheliang; Zhao, Junhai; Miao, Xiaoyu

Characteristics of Phosphate Conversion Coatings on AZ91D Magnesium Alloy
pp. 1047-1051(5)
Authors: Jia, Suqiu; Chen, Qishuang

Effect of Weld Heat Input on Weld Joint of B610CF Steel
pp. 1052-1056(5)
Authors: Zhang, Tianhui; Chen, Yunchun; Yan, Peijun; Jin, Fangwei; Ma, Yanli

Optimal Design of Plate Structures with Discrete Variables by Group Search Optimizer
pp. 1057-1061(5)
Authors: Zhong, Genquan; Liu, Feng

The Study on Defects of 6-Inch Cylinder by Electro Magnetic Acoustic Transducer (EMAT)
pp. 1062-1066(5)
Authors: Chang, M. K.; Lin, Z. L.; Jeng, J. J.

Effects of Y on the Microstructures and Mechanical Properties of Mg₂ Si/AM60 Magnesium Matrix Composites
pp. 1067-1071(5)
Authors: Hu, Yong; Yan, Hong

Initial Growth Behavior and Deposition Mechanism of Pulse Electrodepositing Ni-W-P/CeO₂-SiO₂ Composites
pp. 1072-1077(6)
Authors: Xu, Ruidong; Wang, Junli; Zhang, Yuzhi; Zhou, Jianfeng

Study on Energy Consumption Model Based on Product Formation in Iron and Steel Industry
pp. 1078-1082(5)
Authors: Wang, Wanlei; Yuan, Changfeng; Meng, Qiunan; Huang, Xuewen

Zinc Supported on White Carbon Black Containing Cerium as Antibacterial Material
pp. 1083-1087(5)
Authors: Zhang, Bin; Tang, Xiaoning; Xu, Yinhua; He, Suqiong

Microstructure and Properties of an X80 Pipeline Steel Manufactured by Untraditional TMCP
pp. 1088-1092(5)
Authors: Deng, Wei; Gao, Xiuhua; Qin, Xiaomei; Zhao, Dewen; Du, Linxiu

An Analytical Solution for Interface Cracks Under the Mode II Condition
pp. 1093-1097(5)
Authors: Zhang, Xuexia; Cui, Xiaochao; Yang, Weiyang; Li, Junlin; Zhao, Wenbin

Microstructures and Properties of MIG Joint of AA5083 Aluminum Alloy Used in High-Speed Vehicle
pp. 1098-1102(5)
Authors: Yang, Shanglei; Luo, Bin; Lv, Renyuan; Meng, Lichun; Lin, Qinglin

Stress-Strain Analysis for Creep-Thermal Fatigue Interaction
pp. 1103-1107(5)
Authors: Yan, Ming; Zheng, Peng; Li, Yan; Lin, Jianfeng; Gao, Xiufeng

Study on the Tribological Performance of Sisal Fiber/Polysulfone/Phenolic Composite Friction Material
pp. 1108-1112(5)
Authors: Xiong, Xue-Mei; Wei, Chun; Zeng, Ming

Laboratory Study of the Rolling Contact Fatigue of High Manganese Steel Crossings
pp. 1113-1116(4)
Authors: Yang, Shuai; Zheng, Chunlei; Zhang, Peng; Feng, Xiaoyong; Zhang, Fucheng; Qian, Lihe

Microstructure and Fracture Toughness of TiC-xNi Coatings Prepared by Electro-Thermal Explosion Ultra-High Speed Spraying Method
pp. 1117-1121(5)
Authors: Liu, Jingjing; Liu, Zongde

Study of Constitutive Equation and Performance of Rubber Filled Concrete
pp. 1122-1127(6)
Authors: Liu, Feng; Pan, Dongping

Experimental Study on Dynamic Behavior of Concrete at Elevated Temperatures
pp. 1128-1131(4)
Authors: He, Yuanming; Huo, Jingsi; Xiao, Yan

Study on High Strength Concrete Modified by Recycled Rubber Powder and Steel Fiber
pp. 1132-1136(5)
Authors: Zhu, Jiang; Zhu, Zhiwen

Steady-State Response of a Trilinear Hysteretic System
pp. 1137-1142(6)
Authors: Jin, Jiduo; Zhang, Yufei; Yang, Xiaodong

Effect of Steel Slag Powder on the Chloride Permeability of High Performance Concrete
pp. 1143-1146(4)
Author: Li, Yunfeng

Study on Improvement of Planning and Scheduling in IT Manufacturing Processes Based on Technology Roadmaps
pp. 1147-1150(4)
Authors: Liu, Da-Wei; Burke, Haris

Research on the Machining of Electro-Chemical Grinding by Using a Spiral-Fluted Electrode
pp. 1151-1154(4)
Authors: Yin, Yang; Yin, Guofu; Li, Chenyue

Properties Evaluation of Cement-Based Composites Containing Steel Fiber and Silica Fume
pp. 1155-1164(10)
Authors: Lin, Wei-Ting; Cheng, An; Huang, Ran; Chi, Mao-Chieh; Hwang, Howard

Study on the Forming Process of Mechanical Zinc Plating
pp. 1165-1169(5)
Author: Ding, Jincheng

Effect of Excess Bismuth on Powder Formation, Sintering Behavior and Dielectric Properties of Bi₃NbTiO₉
pp. 1170-1175(6)
Authors: Li, Bao-Rang; Liu, Xing-Tao; Xi, Xin-Ming

Valence Electron Structures of /α Biphase Interface and Interface Properties in Al-Cu Alloy
pp. 1176-1181(6)
Authors: Qu, Hua; Liu, Weidong; Shen, Xiaolu; Zhou, Gang; Liu, Chuang

Effect of Ti, Sc and Zr Additions on as-Cast Microstructures of 7005 Aluminum Alloy
pp. 1182-1188(7)
Authors: Zuo, Xiurong; Ni, Peixiang

Influence of Metallic Complexes on Electrodeposition Process of Zn-Fe Alloy Coatings
pp. 1189-1192(4)
Authors: Fan, Yunying; Jiang, Yehua; Zhou, Rong

Composite Logarithmic Model for Dynamic Stress–Strain Curve of Soft Soil
pp. 1193-1196(4)
Authors: Wang, Wei; Pan, Gaojie; Pan, Zeng; Zhou, Ganwu; Ling, Hua

Structures and Properties of Ni-W-B/CeO₂ Composite Coatings Prepared by Pulse Electrodeposition
pp. 1197-1202(6)
Authors: Wang, Junli; Xu, Ruidong; Wang, Shaohua; Zhang, Yuzhi

Investigation of Laser Surface Melting Processing for A357 Alloy
pp. 1203-1207(5)
Authors: Chen, Zhongwei; Lei, Yimin; Yang, Rui; Zhang, Haifang

LSSVM Inverse Control of Two-Motor Variable Frequency Speed-Regulating System
pp. 1208-1213(6)
Authors: Liu, Guohai; Zhang, Yi

Study on Emulsion for Electrical Discharge Milling of SiC Ceramic
pp. 1214-1218(5)
Authors: Ji, Renjie; Liu, Yonghong; Zhang, Yanzhen; Liu, Jing; Li, Xiaopeng

Modal Prediction and Sensitivity Analysis of Wind-Turbine Planetary Gear System with Flexible Planet Pin
pp. 1219-1224(6)
Authors: Zhu, Cai-Chao; Xu, Xiang-Yang; Wang, Hai-Jun

Study on Electrochemical Properties of Al/Pb-PANI-WC Inert Anodes
pp. 1225-1229(5)
Authors: Zhou, Jianfeng; Xu, Ruidong; Chen, Buming

Determination of Young's Modulus and Poisson's Ratio of Nanoporous Low-k Thin Film by Laser-Generated Surface Acoustic Waves
pp. 1230-1234(5)
Authors: Shan, Xingmeng; Xiao, Xia; Liu, Yaliang

Processing Maps and Microstructure Evolution of 316LN Stainless Steel
pp. 1235-1239(5)
Authors: He, Wenwu; Liu, Jiansheng; Chen, Huiqin; Guo, Huiguang

Aluminum Alloy Super-Hydrophobic Surface Fabrication via Electrochemical Etching Method
pp. 1240-1243(4)
Authors: Wang, Peng; Qiu, Ri; Zhang, Dun; Lin, Zhifeng

An Experimental Study on Creep Damage of In-Situ TiC-Based Composites
pp. 1244-1248(5)
Authors: Li, Bin; Liu, Zong-De; Wang, Song

Effects of Ultrasonic on Preparation of Alumina Powder by Wet Chemical Method
pp. 1249-1253(5)
Authors: Chen, Caifeng; Wang, Andong; Fei, Lingjuan

Effects of Vacuum Holding Time on the Microstructures of Thin-Walled Ductile Iron
pp. 1254-1259(6)
Authors: Lei, Li; Qiang, Li; Qiang, Wang; Guojie, Huang

Optimal Tool Replacement for Integrated Circuit Manufacturing Processes with Multiple Characteristics Based on Capability Index
pp. 1260-1264(5)
Author: Hsu, Ya-Chen

A Simplified Model for Describing the Effect of Intumescent Coating to Protect Steel Under Fire Conditions
pp. 1265-1269(5)
Authors: Chen, Changkun; Shen, Bingyin

Preparation of Natural Laminar Hydrosilicate Powders and Their Tribological Properties as Lubricant Additive Under Point-Contact Conditions
pp. 1270-1275(6)
Authors: Zhang, Baosen; Xu, Yi; Gao, Fei; Xu, Binshi; Wu, Yixiong

Study on the Impact Properties of Ductile Iron at −20 °C
pp. 1276-1280(5)
Authors: Lei, Li; Qiang, Li; Qiang, Wang; Guojie, Huang

Scattering of SH-Waves by Cylindrical Lining Debonded Near Bi-Material Interfaces
pp. 1281-1285(5)
Authors: Nan, Jingfu; Qi, Hui; Shi, Yong

Effect of Size Fraction of Ground Granulated Blast Furnace Slag on Its Strength Contribution and Hydraulic Activity
pp. 1286-1291(6)
Authors: Zhang, Tong-Sheng; Yu, Qi-Jun; Wei, Jiang-Xiong; Zhang, Ping-Ping; Li, Shun