Skip to main content

ADVANCED SCIENCE LETTERS is an international peer-reviewed journal with a very wide-ranging coverage, consolidates research activities in all areas of (1) Physical Sciences, (2) Biological Sciences, (3) Mathematical Sciences, (4) Engineering, (5) Computer and Information Sciences, and (6) Geosciences to publish original short communications, full research papers and timely brief (mini) reviews with authors photo and biography encompassing the basic and applied research and current developments in educational aspects of these scientific areas.

Publisher: American Scientific Publishers

More about this publication?
Volume 4, Number 3, March 2011

Research Articles

Favourites:
ADD

Design and Performance Testing of a Micro Flexible Caudal Fin-Like Propulsor
pp. 641-645(5)
Authors: Li, Jian; Wang, Zhenlong; Wang, Yangwei; Hang, Guanrong

Favourites:
ADD

Study on Design and Test of Flexible Uniform Pressure Loading Device
pp. 646-650(5)
Authors: Wang, Hanpeng; Li, Shucai; Yue, Xiaolei; Wang, Qi

Favourites:
ADD

Compressive Tests for Rubberized Concrete Under Different Loading Rates
pp. 651-655(5)
Authors: Chen, Guixuan; Liu, Feng

Favourites:
ADD

Pushover Analysis of a 53 m High Wind Turbine Tower
pp. 656-662(7)
Authors: Guo, Lanhui; Uang, Chia-Ming; Elgamal, Ahmed; Prowell, Ian; Zhang, Sumei

Favourites:
ADD

Experimental and Theoretical Study on Structural Behavior of Fabric Reinforced Concrete Sandwich Panels
pp. 663-668(6)
Authors: Chen, Zhihua; Zhou, Ting; Liu, Hongbo; Chen, Yonghao; Wang, Xiaodun

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Numerical Simulation and Experimental Analysis of Riveting with Pipe Rivet
pp. 686-690(5)
Authors: Huang, Zhichao; Fan, Kuaichu; Yao, Qiuhua; Lai, Jiamei

Favourites:
ADD
Favourites:
ADD

Real-Time Health Monitoring of Pipeline Structures Using Piezoelectric Guided Wave Propagation
pp. 696-701(6)
Authors: Kim, Ju-Won; Lee, Changgil; Park, Seunghee

Favourites:
ADD
Favourites:
ADD

Identification of Material Parameters for High Strength Steel Under Impact Loading
pp. 708-714(7)
Authors: Zhang, Yong; Sun, Guangyong; Li, Guangyao; Rungsiyakull, Chaiy; Li, Qing

Favourites:
ADD

Friction and Wear Properties of Si3N4 and SiC Used for Water-Lubricated Sliding Bearings
pp. 715-719(5)
Authors: Liu, Feng; Lin, Bin; Zhang, Xiaofeng

Favourites:
ADD

Stress–Strain Relation Model of Core RPC and Its Application to RPC-Filled Steel Tubes
pp. 720-725(6)
Authors: Zeng, Jianxian; Jiang, Shao-Fei; Wu, Yanhai

Favourites:
ADD

Numerical Simulation on Hot Forming of B Pillar
pp. 726-730(5)
Authors: Zhang, Zhiqiang; Li, Xiangji; Pan, Libo; Wei, Xing

Favourites:
ADD

The Dynamic Mechanical Behavior of Sandwich Beams with Aluminum Honeycomb Cores
pp. 731-735(5)
Authors: Jing, Lin; Yan, Qingrong; Wang, Zhihua; Zhao, Longmao

Favourites:
ADD
Favourites:
ADD

Synthesis of Polyurethane Prepolymers and Damping Property of Polyurethane/Epoxy Composites
pp. 740-744(5)
Authors: Shi, Minxian; Zheng, Juanli; Huang, Zhixiong; Qin, Yan

Favourites:
ADD

Computational Flow Dynamics of the Refrigerant Distribution in a Spray Type Evaporator
pp. 745-749(5)
Authors: Chien, Liang-Han; Wang, Shih-Ming; Liao, Wun-Rong

Favourites:
ADD

Structure and Performance of Electroless Nickel Plating Combined with Micro-Arc Oxidation on Pure Titanium
pp. 750-754(5)
Authors: Zhongcai, Shao; Haitao, Jiang; Shouqiang, Wei; Liping, Wu

Favourites:
ADD

Development of Seismic Isolation Techniques for Elevated Platform of Hi-Tech Factory Building
pp. 759-763(5)
Authors: Sung, Wen-Pei; Shih, Ming-Hsiang; Chen, Chang-Liang

Favourites:
ADD
Favourites:
ADD

Tb-Based Bulk Metallic Glass with High Elastic Modulus
pp. 769-773(5)
Authors: Wang, Yongtian; Liu, Zongde

Favourites:
ADD

Effect of Ultra Violet Process and Annealing on Reliability in Low Temperature Silicon Wafer Direct Bonding
pp. 774-780(7)
Authors: Malik, Rizwan; Shi, Tielin; Tang, Zirong; Liu, Shiyuan

Favourites:
ADD

Research on Aseismic Measures and Materials for Underground Engineering
pp. 781-785(5)
Authors: Chen, Weizhong; Huang, Sheng; Yang, Jianping; Tan, Xianjun

Favourites:
ADD

Study on the Penetration of Open-Cell and Closed-Cell Aluminum Foams by Flat-Ended Projectiles
pp. 786-790(5)
Authors: Yan, Xiaopeng; Zhang, Nianmei; Zhao, Yonggang; Liang, Weimin; Yang, Guitong

Favourites:
ADD

Fatigue Properties of Al2O3-ZrO2 Nano-Composite Ceramics Under Ultrasonic Vibration
pp. 791-795(5)
Authors: Ma, Hui; Zhao, Bo; Wang, Xuyang

Favourites:
ADD
Favourites:
ADD

Geometry Optimization of Magneto-Rheological Damper for Vehicle Suspension via Finite Element Method
pp. 805-809(5)
Authors: Sung, Kum-Gil; Choi, Seung-Bok; Park, Min-Kyu

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Measurement and Estimation of the Cutting Temperature During Lathe-Turning of Zr-Based Bulk Metallic Glass
pp. 819-823(5)
Authors: Zhang, Weiguo; Ma, Mingzhen; Song, Aijun; Liang, Shunxing; Zhang, Xinyu; Hao, Qiuhong; Liu, Riping

Favourites:
ADD

Finite Element Simulation of Temperature Field in Plunge Milling Ti-6A1-4V at Cooling Condition
pp. 824-829(6)
Authors: Qin, Xuda; Jia, Hao; Ji, Xiaolai; Sun, Xiaotai; Wang, Qi

Favourites:
ADD
Favourites:
ADD

Multi-Objective Design Optimization of Coronary Stent Mechanical Properties
pp. 835-838(4)
Authors: Shen, Xiang; Ni, Zhonghua

Favourites:
ADD

Temperature Field Analysis of Non-Conductive Ceramics Process Based on Single Capacitance Discharge
pp. 839-843(5)
Authors: Shen, Rong; Liu, Yonghong; Zhang, Haifeng; Ji, Renjie

Favourites:
ADD
Favourites:
ADD

Numerical Control Tool-Path Generation for Subdivision Surface Using Toroidal Cutter on 5-Axis Machine Tool
pp. 851-858(8)
Authors: Zhang, Zixian; Ren, Bingyin; Feng, Yixiong; Hagiwara, Ichiro

Favourites:
ADD

Study on Rock Fracture Failure Criterion Based on Energy Principles
pp. 869-874(6)
Authors: Gao, Wei; Wang, Lei; He, Songcheng

Favourites:
ADD

Use of Nanoindentation and Nanoscratching Tests to Characterize the Ductile-Brittle Transition
pp. 880-884(5)
Authors: Sun, Yuli; Zuo, Dunwen; Zhu, Yongwei; Li, Jun

Favourites:
ADD

Design and Control of Electrorheological Suspension Using Fuzzy Moving Sliding Mode Control
pp. 885-890(6)
Authors: Sung, Kum-Gil; Choi, Seung-Bok; Park, Min-Kyu

Favourites:
ADD

Laser Processing Technique of Stainless Steel Surface Nanotexture
pp. 891-894(4)
Authors: Yang, Haifeng; Wang, Yanqing; Fang, Liang; Ge, Shirong

Favourites:
ADD

Study on Property of Reversible Thermochromatic Anti-Counterfeiting Paper
pp. 895-899(5)
Authors: Long, Zhu; Dong, Cuihua; Zhang, Hui

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Experimental Study on Tensile Strength of Steel-Polypropylene Hybrid Fiber Reinforced Concrete
pp. 911-916(6)
Authors: Xu, Lihua; Xu, Haoran; Chi, Yin; Zhang, Yuanyuan

Favourites:
ADD

Size Effect on Fracture Parameters of Concrete
pp. 917-921(5)
Authors: Wei, Demin; Zhang, Heng

Favourites:
ADD

Preparation Process of Microcapsule Containing Phase Change Material for Thermal-Energy Storage
pp. 933-937(5)
Authors: Yang, Zhao; Wei, Zhang; Leping, Liao; Wujun, Li; Yi, Xin

Favourites:
ADD

Effect of Deformation Temperature on the Microstructure of Boron Steel 22MnB5
pp. 938-942(5)
Authors: Min, Junying; Lin, Jianping; Li, Jiayue

Favourites:
ADD

Simulation of Non-Gaussian Random Field for Boundary In-Plane Imperfection
pp. 943-947(5)
Authors: Li, Chunxiang; Li, Jinhua

Favourites:
ADD

Shrinkage Properties of Ultra-High Performance Concrete (UHPC)
pp. 948-952(5)
Authors: Koh, Kyungtaek; Ryu, Gumsung; Kang, Sutae; Park, Jungjun; Kim, Sungwook

Favourites:
ADD

Sliding Mode Control Design of Active Vehicle Suspension Systems with Two-Time Scale Submodels
pp. 953-957(5)
Authors: Qiao, Feng; Sun, Shuang; Sun, Jia; Zhu, Quanming

Favourites:
ADD

Experimental Study of Size Effect on Static/Dynamic Flexural-Tensile Strength of Three-Graded Concrete
pp. 958-962(5)
Authors: Zhou, Jikai; Chen, Xudong; Wu, Shengxing; Chen, Houqun

Favourites:
ADD

Microstructure and Wear Resistance of Fe-Based Multi-Layers Amorphous Composite Coatings by Tungsten Inert Gas Cladding
pp. 963-967(5)
Authors: Hu, Weiqiang; Liu, Zongde; Wang, Yongtian; Zhang, Hualei

Favourites:
ADD

The Microstructure and Tensile Properties of Ti-45Al-5Nb-0.03Y After Hot Extrusion
pp. 968-972(5)
Authors: Zhang, Hao; Xu, Wenchen; Shan, Debin; Li, Xinan

Favourites:
ADD

Experiment Research on Sound Absorption Performance of Metal Rubber Materials
pp. 973-976(4)
Authors: Dong, Xiuping; Huang, Mingji; Feng, Tao; Ji, Xuefei

Favourites:
ADD

Size Effect of Fracture Toughness of High Strength Fiber Concrete
pp. 977-980(4)
Authors: Zhou, Hao; Huang, Peiyan; Zheng, Shunchao; Hu, Ruolin

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Study on NiCrAl Coating Alloyed on In718 Ni-Base Alloy by High-Energy Micro-Arc Alloying Processing
pp. 996-1001(6)
Authors: Chen, Changjun; Zhang, Min; Zhang, Shichang; Chang, Qingming; Chen, Xia

Favourites:
ADD

Research on a New Process: Warm Tension-Rotation Bending of AZ31 Extruded Profile
pp. 1002-1006(5)
Authors: Xiao, Han; Liu, Jinsong; Zhang, Shihong; Zhang, Xingguo; Wang, Qi

Favourites:
ADD

Microstructure Characteristics and Corrosion Resistance of In-Situ Composite Steel Processed by Severe Cold-Rolling
pp. 1007-1011(5)
Authors: Zhao, Jun; Wang, Zhi; Zhang, Han; Zhai, Hongyan; Wang, Min; Chen, Jiuchuan; Gao, Yuwei

Favourites:
ADD

Investigation on Microstructure and Properties of WCu Alloy Fabricated by Infiltrating CuLa Master Alloy Into W Skeleton
pp. 1012-1016(5)
Authors: Wang, Xianhui; Liang, Shuhua; Wang, Bo; Zou, Juntao

Favourites:
ADD

Deformability of Cu-W Composites with Addition of Cr, Ti Activated Elements
pp. 1017-1021(5)
Authors: Zou, Juntao; Yang, Xiaohong; Liu, Gaofeng; Liang, Shuhua

Favourites:
ADD

Microstructure and Properties of AZ61 Magnesium Alloy Joint by Electron Beam Welding
pp. 1022-1026(5)
Authors: Ye, Hong; Yan, Zhonglin; Yang, Hanli

Favourites:
ADD

Influence of Fire Times on the Microstructure and Mechanical Properties of Forgings with Complex Shape
pp. 1027-1031(5)
Authors: Zhang, Yanqiu; Xu, Fuchang; Jiang, Shuyong; Shan, Debin

Favourites:
ADD

Flexural Performance of Lightly Reinforced Concrete Beams with Ultra-High Strength Fiber-Reinforced Concrete (UHSFRC)
pp. 1032-1038(7)
Authors: Kang, Su-Tae; Ryu, Gum-Sung; Park, Jung-Jun; Koh, Kyung-Taek; Kim, Sung-Wook

Favourites:
ADD

Ultrasonic Detection Research for the Defect Near the Surface of Steel Plate
pp. 1039-1041(3)
Authors: Chang, M. K.; Chi, F. C.; Shu, C. M.

Favourites:
ADD

Theoretical and Experimental Research on Magnetic Flux Stress Testing Method for Steel Structure
pp. 1042-1046(5)
Authors: Xiong, Ergang; Wang, Sheliang; Zhao, Junhai; Miao, Xiaoyu

Favourites:
ADD

Characteristics of Phosphate Conversion Coatings on AZ91D Magnesium Alloy
pp. 1047-1051(5)
Authors: Jia, Suqiu; Chen, Qishuang

Favourites:
ADD

Effect of Weld Heat Input on Weld Joint of B610CF Steel
pp. 1052-1056(5)
Authors: Zhang, Tianhui; Chen, Yunchun; Yan, Peijun; Jin, Fangwei; Ma, Yanli

Favourites:
ADD
Favourites:
ADD

The Study on Defects of 6-Inch Cylinder by Electro Magnetic Acoustic Transducer (EMAT)
pp. 1062-1066(5)
Authors: Chang, M. K.; Lin, Z. L.; Jeng, J. J.

Favourites:
ADD

Initial Growth Behavior and Deposition Mechanism of Pulse Electrodepositing Ni-W-P/CeO2-SiO2 Composites
pp. 1072-1077(6)
Authors: Xu, Ruidong; Wang, Junli; Zhang, Yuzhi; Zhou, Jianfeng

Favourites:
ADD

Study on Energy Consumption Model Based on Product Formation in Iron and Steel Industry
pp. 1078-1082(5)
Authors: Wang, Wanlei; Yuan, Changfeng; Meng, Qiunan; Huang, Xuewen

Favourites:
ADD

Zinc Supported on White Carbon Black Containing Cerium as Antibacterial Material
pp. 1083-1087(5)
Authors: Zhang, Bin; Tang, Xiaoning; Xu, Yinhua; He, Suqiong

Favourites:
ADD

Microstructure and Properties of an X80 Pipeline Steel Manufactured by Untraditional TMCP
pp. 1088-1092(5)
Authors: Deng, Wei; Gao, Xiuhua; Qin, Xiaomei; Zhao, Dewen; Du, Linxiu

Favourites:
ADD

An Analytical Solution for Interface Cracks Under the Mode II Condition
pp. 1093-1097(5)
Authors: Zhang, Xuexia; Cui, Xiaochao; Yang, Weiyang; Li, Junlin; Zhao, Wenbin

Favourites:
ADD

Microstructures and Properties of MIG Joint of AA5083 Aluminum Alloy Used in High-Speed Vehicle
pp. 1098-1102(5)
Authors: Yang, Shanglei; Luo, Bin; Lv, Renyuan; Meng, Lichun; Lin, Qinglin

Favourites:
ADD

Stress-Strain Analysis for Creep-Thermal Fatigue Interaction
pp. 1103-1107(5)
Authors: Yan, Ming; Zheng, Peng; Li, Yan; Lin, Jianfeng; Gao, Xiufeng

Favourites:
ADD
Favourites:
ADD

Laboratory Study of the Rolling Contact Fatigue of High Manganese Steel Crossings
pp. 1113-1116(4)
Authors: Yang, Shuai; Zheng, Chunlei; Zhang, Peng; Feng, Xiaoyong; Zhang, Fucheng; Qian, Lihe

Favourites:
ADD

Study of Constitutive Equation and Performance of Rubber Filled Concrete
pp. 1122-1127(6)
Authors: Liu, Feng; Pan, Dongping

Favourites:
ADD

Experimental Study on Dynamic Behavior of Concrete at Elevated Temperatures
pp. 1128-1131(4)
Authors: He, Yuanming; Huo, Jingsi; Xiao, Yan

Favourites:
ADD
Favourites:
ADD

Steady-State Response of a Trilinear Hysteretic System
pp. 1137-1142(6)
Authors: Jin, Jiduo; Zhang, Yufei; Yang, Xiaodong

Favourites:
ADD

Research on the Machining of Electro-Chemical Grinding by Using a Spiral-Fluted Electrode
pp. 1151-1154(4)
Authors: Yin, Yang; Yin, Guofu; Li, Chenyue

Favourites:
ADD

Properties Evaluation of Cement-Based Composites Containing Steel Fiber and Silica Fume
pp. 1155-1164(10)
Authors: Lin, Wei-Ting; Cheng, An; Huang, Ran; Chi, Mao-Chieh; Hwang, Howard

Favourites:
ADD

Study on the Forming Process of Mechanical Zinc Plating
pp. 1165-1169(5)
Author: Ding, Jincheng

Favourites:
ADD
Favourites:
ADD

Valence Electron Structures of /α Biphase Interface and Interface Properties in Al-Cu Alloy
pp. 1176-1181(6)
Authors: Qu, Hua; Liu, Weidong; Shen, Xiaolu; Zhou, Gang; Liu, Chuang

Favourites:
ADD
Favourites:
ADD

Influence of Metallic Complexes on Electrodeposition Process of Zn-Fe Alloy Coatings
pp. 1189-1192(4)
Authors: Fan, Yunying; Jiang, Yehua; Zhou, Rong

Favourites:
ADD

Composite Logarithmic Model for Dynamic Stress–Strain Curve of Soft Soil
pp. 1193-1196(4)
Authors: Wang, Wei; Pan, Gaojie; Pan, Zeng; Zhou, Ganwu; Ling, Hua

Favourites:
ADD

Structures and Properties of Ni-W-B/CeO2 Composite Coatings Prepared by Pulse Electrodeposition
pp. 1197-1202(6)
Authors: Wang, Junli; Xu, Ruidong; Wang, Shaohua; Zhang, Yuzhi

Favourites:
ADD

Investigation of Laser Surface Melting Processing for A357 Alloy
pp. 1203-1207(5)
Authors: Chen, Zhongwei; Lei, Yimin; Yang, Rui; Zhang, Haifang

Favourites:
ADD
Favourites:
ADD

Study on Emulsion for Electrical Discharge Milling of SiC Ceramic
pp. 1214-1218(5)
Authors: Ji, Renjie; Liu, Yonghong; Zhang, Yanzhen; Liu, Jing; Li, Xiaopeng

Favourites:
ADD

Modal Prediction and Sensitivity Analysis of Wind-Turbine Planetary Gear System with Flexible Planet Pin
pp. 1219-1224(6)
Authors: Zhu, Cai-Chao; Xu, Xiang-Yang; Wang, Hai-Jun

Favourites:
ADD

Study on Electrochemical Properties of Al/Pb-PANI-WC Inert Anodes
pp. 1225-1229(5)
Authors: Zhou, Jianfeng; Xu, Ruidong; Chen, Buming

Favourites:
ADD
Favourites:
ADD

Processing Maps and Microstructure Evolution of 316LN Stainless Steel
pp. 1235-1239(5)
Authors: He, Wenwu; Liu, Jiansheng; Chen, Huiqin; Guo, Huiguang

Favourites:
ADD

Aluminum Alloy Super-Hydrophobic Surface Fabrication via Electrochemical Etching Method
pp. 1240-1243(4)
Authors: Wang, Peng; Qiu, Ri; Zhang, Dun; Lin, Zhifeng

Favourites:
ADD

An Experimental Study on Creep Damage of In-Situ TiC-Based Composites
pp. 1244-1248(5)
Authors: Li, Bin; Liu, Zong-De; Wang, Song

Favourites:
ADD

Effects of Ultrasonic on Preparation of Alumina Powder by Wet Chemical Method
pp. 1249-1253(5)
Authors: Chen, Caifeng; Wang, Andong; Fei, Lingjuan

Favourites:
ADD

Effects of Vacuum Holding Time on the Microstructures of Thin-Walled Ductile Iron
pp. 1254-1259(6)
Authors: Lei, Li; Qiang, Li; Qiang, Wang; Guojie, Huang

Favourites:
ADD
Favourites:
ADD
Favourites:
ADD

Study on the Impact Properties of Ductile Iron at −20 °C
pp. 1276-1280(5)
Authors: Lei, Li; Qiang, Li; Qiang, Wang; Guojie, Huang

Favourites:
ADD

Scattering of SH-Waves by Cylindrical Lining Debonded Near Bi-Material Interfaces
pp. 1281-1285(5)
Authors: Nan, Jingfu; Qi, Hui; Shi, Yong

Favourites:
ADD

Effect of Size Fraction of Ground Granulated Blast Furnace Slag on Its Strength Contribution and Hydraulic Activity
pp. 1286-1291(6)
Authors: Zhang, Tong-Sheng; Yu, Qi-Jun; Wei, Jiang-Xiong; Zhang, Ping-Ping; Li, Shun

Favourites:
ADD

  • Access Key
  • Free content
  • Partial Free content
  • New content
  • Open access content
  • Partial Open access content
  • Subscribed content
  • Partial Subscribed content
  • Free trial content
Cookie Policy
X
Cookie Policy
Ingenta Connect website makes use of cookies so as to keep track of data that you have filled in. I am Happy with this Find out more